SH Spy-Spyder

This is a replacement pack of two Sky-Hero Carbon Propellers. These props are constructed of 2K carbon fiber and BEST for use with Sky-Hero platforms.

Includes: (1) CW 13x6.5 2K Carbon Prop (1) CCW 13x6.5 2K Carbon Prop

Aluminium made Clamp, for 30mm tubes.

Allows simple installation and access to frame if disassembly needed- your Motor arms will not fall down.

the clamp is 40mm high.

Set of 1 clamp

Sky hero self tightening propellers for Little Spyder-Little Six 9.4' x 5

Set of 2, 1 CW +1 CCW

Sky hero Spy/der Tuning Conversion Kit is a set of Clamps and Spacers, Allowing you many benefits from the building process till the maintenance.

New- Spacers now delivered are CNC made, lightweight 7075 Alu, silver anodized

What will you gain with this set?

• Lightweight concept structure, increase the robustness of the frame structure.
• Simple assembly, with this set- your motor arms will never fall down, even when you disasseble the main frame.
• Easy access and maintenance of the machine, when disassemble process is needed.
• Clamps will provide you much stronger support for heavy lift.
• ABS made spacers will provide you with higher place inside the frame, allow installation of more components, especially in Spy and Spyder version.
• Spacers are much stronger than originals. Holes will allow you easy wiring In and out where needed.
• Better cooling in certain weather conditions.
• Virtually unbreakable parts! tested in stress and crash test.

What is included?

- Based on the version of the machine, e.g Spy or Spyder 4/6  you will get complete set of CNC Spacers, and Clamps needed to replace your current parts.

• Spy :Set of 3 Spacers, 6 clamps, Hardware
• Spyder 4/8 :  Set of 5 Spacers, 8 clamps, Hardware
• Spyder 6 : Set of 6 Spacers, 12 clamps, Hardware

Hardware is included.

- Note- we recommend this kit for " Handy people" and assemblers of drones.
- You will need to drill some extra holes for the clamps.

This is an upgrade ( electronics set) for Sky hero Spyder. (Frame is Not included)

• Combo available in 3 versions:
• Combo 4:  4 motors, 4 esc, 2 sets of CF props, Wire set
• Combo 5:  4 motors, 4 esc, 2 sets of CF props, Wire set, Pixhawk
• Combo 6:  4 motors, 4 esc, 2 sets of CF props, Wire set, Wookong M

This is an upgrade ( electronics set) for Sky hero Spyder and Spy (Frame is Not included)

Combo available in Different versions and will include:

Combo 1 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, No Flight controller
Combo 3 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, DJI A2
Combo 4 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, APM 2.8, GPS
Combo 5 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, Pixhawk, GPS

Combos below can be used for Spy and Spyder 6

Combo 6 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, No Flight controller
Combo 8 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, DJI A2
Combo 9 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, APM 2.8, GPS
Combo 10 For Spy:6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, Pixhawk, GPS

Tube is a very high quality carbon fibre tube made with Pullwinding production technology. The material of the tube in question is a mix of glassfibre, carbon fibre and epoxy.
The tube is light weight, strong and stiff and is well suited for demanding applications.
The outer diameter of the tube is 30 mm and inner diameter 27 mm. Length of the tube is 100 cm and the color is black.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Size:30mm out diameter 27mm inner diameter
•   Length: 1000mm
•   HYBRID Carbon Fiber
•   Quantity: 1pc

Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

please advise +- the size how you want them cut, example 50/50cm, 30-70...

Carbon Fiber 3k tube, size : 30 mm OD,28mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.

High strength roll wrapped carbon fibre tube with a glossy, woven carbon fibre finish making them a great choice for a huge range of both structural and cosmetic applications including drones, UAVs, camera rigs, automation, tripods, lightweight structures and much more.

Specifications:

•   Size:30mm out diameter 28mm inner diameter
•   Length: 1000mm
•   100% Carbon Fiber
•   Quantity: 1pc

Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

please advise +- the size how you want them cut, example 50/50cm, 30-70...

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those  Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Technology : 3K Matte Twill Matte
  
•   Size:15mm OD/ 13mm ID
•   Length: 1000mm
•   Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those  Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Technology : 3K Matte Twill Matte
  
•   Size:20mm OD/ 18mm ID
•   Length: 1000mm
•   Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

• Technology : 3K Matte Twill Matte
  
• Size:24mm OD/ 22mm ID
• Length: 1000mm
• Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

• Technology : 3K Matte Twill Matte
• Size:35mm OD/ 33mm ID
• Length: 1000mm
• Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

• Technology : 3K Matte Twill Matte
• Size:40mm OD/ 37mm ID
• Length: 1000mm
• Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

•  Technology : 3K Matte Twill Matte
•  Size: 8mm OD / 6mm ID
•  Length: 1000mm
•  Quantity: 1pc

Colored Carbon fiber tube 30x28mm, 1000mm long, Yellow color Or White, CHOOSE in options
Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

Carbon Fiber 3k tube in Color finish
Size : 30 mm OD,28mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Size:30mm out diameter 28mm inner diameter
•   Length: 1000mm
•   Quantity: 1pc
•   Color- Yellow- white- choose in options