SH Spy-Spyder

New VERSION Red Knurled thumb screw M4 for Inertic plate (10 pcs)

Comes in black + white inserts color.

Including in the set:

• 3 complete Motor arm sets (6 halves)
• T-nuts (2pcs)
• Spacers (3pcs)
• Inserts (3pcs)
• Landing gear holders (all in black reinforced color)

Transform any sky-hero to a new Pancake version, accept motors up to 53 mm.

Pancake conversion set Spyder (complete set smoke color injected parts, T-nuts, Inserts.

Pancake arms Comes in our Black color. Motors not included. T-spacers are white. Landing gear can be delivered in White, Green or Black color( your choice), if no comments- green color

Transform any sky-hero to a new Pancake version, accept motors up to 53 mm

Included:

8 x pcs of Pancake half arms- Black color
2 x Landing gear Holder, green or black or white (default green)
2 x Landing gear T holder- green or black or white (default green)
5 x Frame Spacers - green or black or white (default green)
4 x Arm T-Insert, White color

Colors may vary

Pancake Conversion set Spyder 6 (only motor frame)

Comes in Black Color

Including :

• 6 complete Motor arm sets( 12 halves).

Motor/ Hardware not included.
Transform any sky-hero to a new Pancake version, accept motors up to 53 mm.

Sky hero New Pancake motor frame ,Black color, Pack of 8, full 4 arms

Reinforced, with better support for screws, fits to motors from 46- 53mm pancake motors, fit 30mm tube

Pack of 8, full 4 arms

Sky-Hero Quick Release Knob Spy and Spyder drones

1 pcs in set

Sky hero New Pancake motor frame ,Black color, saving package of 8 pcs, e.g 4 full arms

Reinforced, with better support for screws, fit 30mm tube. for normal motors up to 35-36mm

8 pcs, 4 full arms

Sky hero New, redesigned, and reinforced Motor frame Black color for motors 35mm

Better screw insert, More Fiber material, make this product stronger.
Included: 1 Half arm.

Sky hero New, redesigned, and reinforced Motor frame smoke-green color for motors 35mm

Better screw insert, More Fiber material, make this product stronger.
Included: 1 Half arm.

Spy upscale kit 750 mm

This kit included Full set of 3 Arms to increase size from Spy 600 to 750 mm.

Spy upscale kit 900 mm

This kit included Full set of 4 Arms to increase size from Spy 600 to 900mm.

Sky-Hero Spyder 6 DJI FLIGHT CONTROLER PLATE set, made from carbon

Sky-Hero Spyder Upscale kit 1000mm

This kit included Full set of 4 Arms to increase size  from Spyder 700 To 1000mm.

Sky-Hero Spyder Upscale kit 700mm.

This kit included Full remplacement set of 4 Arms for Spyder 700.

Sky-Hero Spyder Upscale kit 850mm.

This kit included Full set of 4 Arms to increase size  from Spyder 700 To 850mm.

SKY-HERO Spyder6 Part Carbon Fiber Upgrade Battery Mount Plate Holder

SKH03-049  Tube arm Spy small

SKH03-055 Sky-Hero Tube arm Spy 700 medium

SKH03-056 Sky-Hero Tube arm Spy 900 large

SKH03-053 Sky-Hero Tube arm Spyder 1000 large front

SKH03-054 Sky-Hero Tube arm Spyder 1000 large rear

SKH03-052 Tube arm Spyder medium 850 rear

SKH03-051 Tube arm Spyder medium front

SKH03-050  Sky-Hero Tube arm Spyder Small 700mm Rear

Sky-Hero Ultra efficieent 2815-470KV brushless motor

This is a completely new Tuning part from Aluminium Spacer for Sky hero models.

replacing the plastic spacers, this Aluminum made spacers from 7075 and Anodized for long life lasting.

Spacer has nice cut offs allowing better cooling and possibility to locate hot components as ESCs nearby.

Direct replacement, More cooling, and all this with extra 3 grams of weight. 16 grams Aluminium weight compared to 13 grams standard plastic spacer.

Set of 1 spacers, Silver anodized

to be used with clamps for 40mm structure

This is a canopy for Sky hero Spyder, Made from ABS material.

Virtually Unbreakable, Flexible and virtually unbreakable compared to traditional Fiberglass . Made from same material as famous Suitcases, this is the best choice for your machine.

Weight is 56 Grams only.

Camouflage Blue look, with Matt finish.

This is a canopy for Sky hero Spyder, Made from ABS material.

Virtually Unbreakable and Flexible compared to traditional Fiberglass canopy . Made from same material as famous Suitcases, this is the best choice for your machine.

Weight is 56 Grams only.

Black Carbon finish

Tail fin Vertical Stabilizer Mount 30mm, original used for Agile, however practically to be used on Drones as inertic tube extension.

included 1 piece.

This is a canopy for Sky hero Spy, Made from ABS material. virtually not possible to break, very stiff but yet flexible.

Virtually Unbreakable, More flexible compared to Fiberglass. . Made from same material as famous Suitcases, this is the best choice for your machine.

Weight is 56 Grams only.

Blue Camouflage finish, Matt finish

This is a canopy for Sky hero Spy, Made from ABS material. Virtually not possible to break.

Virtually Unbreakable, More flexible compared to Fiberglass. . Made from same material as famous Suitcases, this is the best choice for your machine.

Weight is 56 Grams only.

Green/Brown Camouflage, Matt finish

This is the ABS material Spacer for Sky hero machines. it is higher (40mm) and usually used with Clamp (avclamp) as a set.

1 Spacer is in the set

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

Fit motors up to 37mm in diameter.

Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

• 2 Half Arms, Made from CNC aluminum,
• Screws

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

Fit motors up to 37mm in diameter.

Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

• 2 Half Arms, Made from CNC aluminum,
• Screws
  

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

Fit motors up to 55mm in diameter.
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

• 2 Half Arms, Made from CNC aluminum,
• Screws

Produced in Europe, this Retractable landing gear will allow you full turn of 3 axis Gimbal without seen your Landing legs in Flight.

Exceptional design with Ball  bearings mechanism, with only one servo operation, Full carbon fiber, make this gear set weight less than 330 Grams!: Means it wil not overload your current Drone!

Operated by 2 X Savox Servos (Not included), with Locking mechanism when in Landing position makes it the most desired part.

Tested with the weight of 40KG load.

Completely Flat (when in flight)

Specification:

Weight: 350 gr

• Base plate wideness: 30cm
• Height : 45 cm (allows large gimbals, can be cut down)