Set Up Tools

Lynx Heli Innovations is always looking for a better way of doing things.

Lynx design a series of One Way Wrench tools suitable for all different Spindle Shaft diameters. This tool is really usefully once in case of maintenance both sides of screws need removed. Lynx wrench is a combination of innovative design and high quality material.

FEATURES:

- Support and help Spindle Shaft screw assembly and disassembly

- Easy and quick use thanks special Lynx ergonomics design

TECHNICAL SPECIFICATION:

- Wrench Material: Aluminum 7075T6 – Silver Color anodized

- One Way Bearing Material: Chrome Steel – Japan Made

PACKING LIST:

- 1 X LX0170 - 4 and 6 mm Spindle Diameter

Lynx Heli Innovations is always looking for a better way of doing things. This shaft fits Spindles of 8 and 10mm

Lynx design a series of One Way Wrench tools suitable for all different Spindle Shaft diameters. This tool is really usefully once in case of maintenance both sides of screws need removed. Lynx wrench is a combination of innovative design and high quality material

FEATURES:

• Support and help Spindle Shaft screw assembly and disassembly
• Easy and quick use thanks special Lynx ergonomics design.

FEATURES:

- Support and help Spindle Shaft screw assembly and disassembly

- Easy and quick use thanks special Lynx ergonomics design.

TECHNICAL SPECIFICATION:

- Wrench Material: Aluminum 7075T6 – Silver Color anodized

- One Way Bearing Material: Chrome Steel – Japan Made

PACKING LIST:

- 1 X LX0169 - 8 and 10 mm Spindle Diameter

StandBox is a light flexible modular system used for building, maintenance, transport, and storage of R/C model airplanes.

Transport:

StandBox makes airplane transportation safer, whether riding in the car's trunk or while carrying the plane with the help of the attached carrying straps. Thanks to its dependable and flexible construction, there is no need to worry about possible damage which could be done to the model airplane during transportation.

Storage Solution:

StandBox effectively organizes your fleet of R/C models. Due to StandBox's dovetail joints and clips it's possible to stack them up on top of each another (Max 5ft./1.5m). The StandBox dovetail locking joints protect your models against horizontal and vertical sliding. The StandBox system effectively manages your storage space.

Intelligent Flexibility:

You can adapt StandBox easily and quickly to your airplane by using a snap blade knife (recommended blade width is 18mm). Thanks to StandBox's dovetail locks, the whole structure is easily adaptable. The StandBox joining support structure uses round corners which provide greater pressure points within individual the connections. More pressure equals stronger joints!Prism and vertical support make all the connections strong without use of the glue. Because the Standbox system uses no glue it can easily be rearranged at any time.

Included:

• 4x Foam Support Ends (Blue)
• 4x  Foam Bars (Yellow)
• 1x  Neck Strap
• 2x Carrying Straps
• 1x  Shovel
• 10x Clips
• Models are for presentation only and not included!
  

StandBox System Plastic attachment Clip, set of 10

StandBox System Plastic attachment part Blade Shovel

1 pcs

450 SIZE will fit the new Ultralight Extreme 3D Edition swashplates WITH 5MM shafts.

A perfectly level swashplate is one of the most important factors in having your helicopter fly straight and handle well.
This handy tool makes it easy to check and set your swashplate alignment at all points of collective travel from full negative to full positive and all points in between.

Using the leveler you can easily adjust out most of the interactions inherent in all eCCPM systems.
With this tool and a few moments time your heli will lift straight off on it's maiden flight and will track better through all flight maneuvers!

500-600 SIZE (8mm shaft) will fit the new Ultralight Extreme 3D Edition swashplates. A perfectly level swashplate is one of the most important factors in having your helicopter fly straight and handle well.

This handy tool makes it easy to check and set your swashplate alignment at all points of collective travel from full negative to full positive and all points in between. Using the leveler you can easily adjust out most of the interactions inherent in all eCCPM systems.
With this tool and a few moments time your heli will lift straight off on it's maiden flight and will track better through all flight maneuvers!

SYSTEM 4 bit holder , Suitable for C 4 (4 mm) bits.

Blade: Chrome-vanadium steel, through hardened, electro-plated.

Tap Wrench. Covers 1/16-1/4" (M1-M8) tap sizes. Use in combination with spring-loaded tap guide for accurate tapping on CNC and manual milling machines.

The SMA Torque wrench will ensure the correct torque is applied when installing the Coaxial Connectors. This ensures consistent broadband VSWR performance and enhanced mate/de-mate life.

The SMATW wrench is an SMA Torque Wrench which is compatible with SMA connectors.

This tool is set up to 8mm connectors with 1NM torque.

Comes in protective plastic case

Curved Micro Hemostat

These items have many uses in a lab, a shop or at home, holding or clamping small or hot items, or reaching into tight places. They can be used for assembly and manufacturing or repair work of many kinds.

Made of stainless steel with semi-polished finish, all feature box joint, serrated jaws and rachet lock to ensure a secure hold.

Lenght- 12cm

Best quality hemostat with high polish finish and tough serrated jaws. Imported from Japan.

These items have many uses in a lab, a shop or at home, holding or clamping small or hot items, or reaching into tight places. They can be used for assembly and manufacturing or repair work of many kinds.

A simple tool with small needle-nose jaws that lock closed with a ratchet on the handle end. Use it to pick up and hold small items, clamp parts together for gluing, or as a handy heat sink when soldering.
Made of stainless steel with semi-polished finish, all feature box joint, serrated jaws and rachet lock to ensure a secure hold.

Lenght- approx 13cm

Wiha 263 P07 Inner hexagonal screwdriver 0.7 mm

Specification:

Blade
High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated.
Wiha ChromTop® finish on tip for a perfect fit every time.

Wiha 263 P09 Inner hexagonal screwdriver 0.9 mm

Specification:

Blade
High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated.
Wiha ChromTop® finish on tip for a perfect fit every time.

Wiha 263 P07 Inner hexagonal screwdriver 1.3 mm

Specification:

Blade
High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated.
Wiha ChromeTop finish on tip for a perfect fit every time.

Precision Machined Bit For Exact Fit, Made From Wiha Exclusive Formula CVM Tool Steel.

This item is the best to use with T-Rex 250 screws.

Through Hardened For Unmatched Durability

Made in Germany by: Wiha Quality Tools

Precision Machined Bit For Exact Fit, Made From Wiha Exclusive Formula CVM Tool Steel.

This item is the best to use with T-Rex 250 -450 screws.

Through Hardened For Unmatched Durability

Made in Germany by: Wiha Quality Tools

Wiha Tools Hexagon Screwdriver Bit, 2.0 X 70 mm

Chrome Vanadium Steel

Through hardened

Style E 6.3

Standards

DIN 3126, ISO 1173

Wiha Tools Hexagon Screwdriver Bit, 2.5 X 70 mm

Chrome Vanadium Steel

Through hardened

Style E 6.3

Standards

DIN 3126, ISO 1173

Wiha Tools Hexagon Screwdriver Bit, 3.0X 70 mm

Chrome Vanadium Steel

Through hardened

Style E 6.3

Standards

DIN 3126, ISO 1173

Item name: Double End wrench

Anodized black COLOR
Material: Aluminum
Size: 3mm, 3.2mm

Item name: Double End wrench

Anodized black COLOR
Material: Aluminum
Size: 3mm, 3.2mm

Item name: Double End wrench

Titanium COLOR
Material: Aluminum
Size: 3.0/4.0mm

Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

This wrench will fit from Glow plug removal to Motor nut replacement.
Wrench sizes are :5.5, 7, 8, 10 M3 M4 M5 M6 Nuts

Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

This wrench will fit from Glow plug removal to Motor nut replacement.
Wrench sizes are : 5.5mm 7mm 8mm 10mm 17mm