Servo Parts

KST original metal servo arm 25T standard servo rocker arm, suitable for a variety of 25T servos.

Main output gear teeth: 25T.

M3 thread holes.

Suitable for KST515MG, 725MG, 525MG, 815MG, 805X... Futaba, Savox, graupner... standard servos.

included: 1 arm, black color.

KST original metal servo arm 25T standard servo rocker arm, suitable for a variety of 25T servos (single rudder arm, excluding screws and other accessories)

Main output gear teeth: 25T Main output gear outer diameter: 6MM

Suitable for KST standard size - such as 515MG, 725MG, 525MG, 815MG, 805X, Futaba , Savox, and other 25T spline standard servos

Fully Adjustable to the neutral point, double fixation, plastic structure in the middle, protects the gear of the servo.

The KST Servo Programming Tool #1 is used for programming KST V6 and V8 servos without the need for a PC or other computer.

This tool has a simple press-button interface that allows the servo mid point and end points to be set. It also allows the direction of rotation to be reversed.

Tool #1 User Guide

1.1. When using with KST X08 and X10 servos power the Tool#1 using any 4.8V to 8.4V DC power source with an XT60 plug (eg a 2S LiPo battery). The exact same output voltage that is fed into the tool is output to the servo, so using a 3S or higher voltage LiPo will irretrievably damage any X08 or X10 servo. The tool DOES NOT regulate the voltage down to a safe level for the servo.

1.2. The voltage input needs to be set according to the working voltage range of different models of KST servos. Do not input high voltage at will. The correct voltage must be used in order not to burn the servo out. For example: if programming a KST X08 V6 servo, the working voltage range is 3.8V – 8.4V, so the input voltage range must be 4.8V-8.4V DC. Alternatively if programming a KST X20-12-M 835-1 servo the working voltage range is 9-13V, so the input voltage range must be 8.4V DC.

2. Output interface: There are two rows of contacts, for programming one servo. The second row is spare. To connect the servo, orient the servo plug so the orange wire is aligned to the "S" mark, and the brown wire to the "-" mark.
-- = servo negative = brown
+ = servo positive = red
S = servo PWM signal = orange

3. Power-on and setting operation steps

3.1. Connect the power supply. After power-on, Tool#1 will enter the self-test. After the self-test is successfully completed, the buzzer will sound twice, and the orange power light of P_LED will blink. You can now connect the servo.

3.2. After checking the correct voltage connect the servo to the RC plug port. After connecting the servo the Tool#1 will automatically recognize this and output a 1500us PMW signal to command the servo to the midpoint location. At this time, the LED below 1500us will turn red and the Tool#1 enters the midpoint setting mode.

3.3. Midpoint setting: After entering the midpoint setting mode, press the "+" and "-" buttons below the 1500us label to set the required servo arm position for the midpoint PMW value, then press the Enter button to confirm. After the confirmation is successful, the buzzer will sound once. This indicates that the midpoint setting is completed and the Tool#1 enters the left and right stroke setting mode.

3.4. Left and right stroke setting: Press the "+" and "-" buttons below the 1000us label to set the max output arm movement in the low PMW signal direction. Then press the "+" and "-" buttons below the 2000us label to set max movement in the other direction. Then press the Enter key to send this info to the servo. The buzzer will sound once to indicate that the left and right stroke setting has been successfully made. The orange power light of P_LED will also start flashing, indicating that all operations have been completed and Tool#1 will enter waiting state, ready for another servo to be connected.

3.5. To only set the servo midpoint position, enter the midpoint setting mode and press the Enter button twice after the setting is complete. To only set the left and right movements, after entering the midpoint setting mode, press the Enter button once to enter the left and right stroke setting mode. After the setting is completed, press the Enter button to complete the servo setup.

4. Use of "CW/CCW" button

4.1. CW = clockwise; CCW = counter-clockwise.

4.2. After entering the left and right stroke setting mode, press the "CW/CCW" button to reverse the servo rotation for a given change of input signal. Then press the Enter key to confirm.

5. The Reset button. The Reset button only resets the Tool#1, and does not reset the connected servo.

The KST Tool #5 is an advanced programming device specifically engineered for precise tuning and adjustment of KST V6 and V8 Servos. This tool empowers users with complete control over their servos, ensuring optimal performance and customization.

Key Programming Features:

• Adjust Right Servo Travel: Fine-tune the servo's right-side travel precisely to achieve the desired motion range.
• Set Servo Center: Fine-tune the servo center for optimal alignment and responsiveness.
• Adjust Left Servo Travel: Precisely set the servo's left-side travel for desired movement deflection.
• Servo Reversing: Quickly and easily reverse the servo for different applications or requirements.
• Soft Start Function: Toggle the soft start option on/off for smooth and controlled movements.

CAUTION INPUT VOLTAGE = OUTPUT VOLTAGE!

It's crucial to not exceed the servo's maximum allowed supply voltage.
Use a 5V supply or a 2S LiPo.

The KST Tool #5 Professional boasts a user-friendly interface, facilitating straightforward and accurate programming of your KST servos for diverse applications in model-building and robotics control systems.

Optimize your servo performance with the precision control offered by the KST Tool#5 Professional, ensuring tailor-made motion applications for various user needs.

See the Instruction Manual PDF below for more info.

The KST Servo Programming Tool Card #5 is used for programming KST servos without the need for a computer.

The Tool Card #5 is an updated version of Tool Card #1. The updated Tool Card #5 features a user friendly interface for setting the servo neutral point and end point. The knob design makes the servo parameter adjustment easier and more intuitive. It also allows reversing the direction of rotation. With this tool, the servo parameter adjustment will be much easier than ever.

Servo Programming Tool Card #3 - A programming device for KST V6.0 and V8.0 servos, it is a very useful tool that makes it possible to not only change the frequency of the servo but also to set the neutral position which likewise adjusts the full travel. This gives the ultimate perfect centering of the servo, a handy tool!

Operating instructions

1. Connect the device to a 6-9V power supply, and the frequency indicators will start to flash.

2. Connect the servo to the servo port. The device will detect the servo frequency and illuminate the corresponding frequency indicator light.

3. Press the toggle frequency button to switch between frequencies. Press enter to select the frequency of the servo in use.

4. Use the dial to center the servo, and press "Enter" to confirm. Press down on the "Neutral set" dial to reset the device.

Nylon Servo Horn - Heavy Duty - Glassfibre Reinforced - Double 70mm - 25T Futaba

Set of 2 pcs

Nylon Servo Horn - Heavy Duty - Glassfibre Reinforced - Single 35mm - 25T Futaba - 2 pcs

Robbe Futaba gear set S3114/S3154

Robbe Futaba gear set S9203

Robbe Futaba gear set S9450

Description:

Includes:

• 4x Servo Horn
• 4x Tapping Screw M2.3

Use for:

• Goblin Fireball
• Goblin MiniComet

Includes:

• Plastic Servo Horn x 4pcs

Use for:

• Futaba servos
• Savox servos
• Align servos
• BK servos
• Outrage servos
• MKS servos

Replacement Gearset for Savox 1350

Savox servo horns for Micro servos, e.g 0261, 0257,0254, also fit Align DS410-420

Servo Accessory Bag Servo 4,3 Gr

Grommet to Allow flexible connection to servo but not only, fits perfectly for servo wire.

Set of 5 pcs.

Replacement case for Savox 1256 servo

Includes:

• 1256TG TOP & BOTTOM CASE WITH 4 SCREWS

Servo Connector - Futaba Female, Blue Line, Made in Germany for Construction,10 pcs

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

Servo Connector - Futaba Male (Pin), Blue Line, Made in Germany for Construction,10 pcs

For 0.2-1.0mm2 wires.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

JST-SH Servo Plug Set for JR Servo side terminals .This a set of 10 Housings (plugs). Comes complete with 10 housings & 30 gold pins.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany

Servo Connector - JR Female, Blue Line, Made in Germany for Construction,10 pcs

For 0.2-1.0mm2 wires.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

Servo Connector - JR Male (Pin), Blue Line, Made in Germany for Construction, Set of 10

For 0.2-1.0mm2 wires.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

This a set of 10 Housings (plugs). Comes complete with 10 housings & 30 gold pins.

JST-SH Servo Plug Set for JR terminals. These gold plated JST-SH plug kits are a must have for any RC enthusiast, there will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany   

This a set of 10 Housings Male (plugs). Comes complete with 10 housings & 30 gold pins.

JST-SH Servo Plug Set for Futaba terminals. These gold plated JST-SH plug kits are a must have for any RC enthusiast, there will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany

This a set of 10 Housings Male. Set of 10 connectors.

Servo Plug Set for Futaba terminals. These gold plated JST-SH plug kits are a must have for any RC enthusiast, there will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts.

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany

Set of 10 pcs

Servo horn Package For SH-0257, Align DS410M

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of Male and Female connectors provided which can be used to create/repair Servo leads and Extensions.

Great for servo replacements or for making your own servo extensions.

This a set of 10 Sets of Housings (plugs). Each set comes with 10 x Male( 2 housings, and 10 x Female) and Comes complete with 30 gold Male and Female pins.

So you will get a total of 30 housings, and 60 Pins( 30M+30F). You will need your own Crimp tool (can be purchased separately)

This product is Made in Germany

Gearset RJX servo FS0521 ,TITANIUM gears, with bearing

Reinforced heavy duty Servo Arms for Futaba/Savox, those arms are made with Reinforced/composite plastic material

Set of Super Strength Futaba/Savox Servo Arms 25T including:

• 2pcs of L22mm
• 2pcs of L29mm
• 2pcs of L35mm
• 2pcs of L58.5mm
  
• Color of arms may vary
  

3D CNC servo arm, for Jr servos ( standard size)
Avaliable in - 38mm length , 1 pcs

Mount your servo on the side or on wing of the heli, airplane and other applications.
CNC made, very light construction.

Material: aluminium 6061-T6 (anodized)
Weight: 20g
Servo: FUTABA, HITEC, JR, SAVOX
Servo not included

Avaliable in Red or Blue( Stock depending)

Carbon Double Arm, made from 2mm reinforced carbon.
This arm will fit any Servo horn. Very Easy to adapt and to mount.

This Double Arm also using Offset Holes, can be used on different helicopters where the Offest is required.
The 2 slotted mounting holes allow for slight radial adjustment for 90 degree pushrods. The inside mounting of the carbon arms result in a more perpendicular pushrod.

Set of 3 arms