SAB-Goblin

SAB Goblin Yellow Carbon Tail Boom - 570 Sport

Description:

SAB Goblin Yellow Fireball Canopy

Includes:

• 1x Canopy Fireball
• 2x Canopy Positioner

Use for:

• Goblin Fireball

Includes:

50pcs Zip Tie 2.5 x 200mm

Includes:

- Sprag Clutch 17 x 25 x 12 (FE425) x 1pc

Used for:

- Goblin Kraken

Includes:

• Plastic Servo Horn x 4pcs

Use for:

• Futaba servos
• Savox servos
• Align servos
• BK servos
• Outrage servos
• MKS servos

HF3C Rotor Head Uruguay Competition Helicopter SAB Goblin

The 2 blades HF3C rotor head was developed with the aim of providing the best results in F3C style flight.

Changing  the rigidity of the dampening system is possible
H0482-70 ( Damper Yellow 70 Shore)
H0482-80 ( Damper Yellow 80 Shore)
H0482-90 ( Damper Yellow 90 Shore)

This item includes:

•  Main Hub HF3C x 1pc
•  Spindle x 1 pc
•  Main Blades Grip Black Matte x 2pcs
•  Main Blades Grip Arm Black Matte x 2pcs
•  Titanium Main Linkage x 2pcs
•  New Design Swashplate x 1set
•  Damper RED 80°, YELLOW 70°, GREEN 90°
•  Hard wares

This item is designed for:

• Goblin Urukay F3C

The new ilGoblin PRO represents a significant technological advancement in RC helicopters, with a complete redesign compared to previous models. Here are the main innovations:

Main transmission:

• The main transmission is based on the renowned GOBLIN gearbox, now further improved.
• The main shaft diameter has been increased to 15 mm for increased rigidity.
• New helical gears for increased durability and strength.
• New One-Way system, redesigned for optimal performance.
• A fast disassembly servo mount that allows for easier and faster maintenance on the servos.
• The new gearbox is lighter than previous models.

Rotor head:

• New design that features new blade grip arms with an improved locking system.
• Self-Centering Titanium washers that ensure automatic centering for greater precision.
• Possibility of adding a pivot shaft for the spindle allowing customization of rigidity and maximum movement.

Tail rotor:

• 8 mm Tail shaft with 8x16x5 bearings that contribute to increase rigidity and a smoother tail.
• The shaft and the Hub are made from a single part in order to have maximum precision.
• The tail pulley will be available in 3 different sizes to adjust the tail ratio according to personal preferences.

Tail boom:

• Made with high-pressure molding technology and its weight is only 180 gr.
• Includes a belt tensioning system with an indicator for optimal control

Canopy and blades:

• With its unique design, you do not have to remove the canopy to change the batteries, they can be inserted from the rear with integrated connectors.
• The blades in the kit are the new S702, with new profile and dynamic performance, color-matched to the canopy.
• The tail blades are S110 with a new design for improved performance.

IlGoblin PRO [SG760] Specifications:

• AIRFRAME weight: 2178 gr (no blades, no battery, no electronics).
• Main rotor diameter: 1576 mm (with 700 mm blades).
• Main blade length: 650 to 730mm.
• Tail rotor diameter: 292 mm (with 110 mm tail blades).
• Tail blade length: 105 to 115 mm.
• Cyclic Servos: Standard size 40mm.
• Tail Servo: Standard size 40mm.
• Main Rotor Ratio: 11.8 to 8.8 (21T included: 10.1:1).
• Tail Rotor Ratio: 5.1-4.9:1 (26T included: 4.9:1)
• Main shaft 15 mm, Tail shaft 8 mm
• Molded carbon tail boom
• Motor 12S, 480/560 KV
• Battery room: 50x60x300 mm
• 21T motor pulley (other pulley sizes available).
• 2 battery trays with integrated connectors.
• S702 Orange (700 mm main blades)
• S110 Orange (110 mm tail blades)

The Kit includes:

• 21T motor pulley (other pulley sizes available).
• 2 battery trays with integrated connectors.
• S702 Orange (700 mm main blades)
• S110 Orange (110 mm tail blades)

The ilGoblin RAW is a simpler version of the ilGoblin PRO with an aluminum tail boom, this version will have the same main components of the ilGOBLIN PRO, it is sold with main blades S701, tail blades S105 and front battery insertion system (without integrated connectors)

Main transmission:

• The main transmission is based on the renowned GOBLIN gearbox, now further improved.
• The main shaft diameter has been increased to 15 mm for increased rigidity.
• New helical gears for increased durability and strength.
• New One-Way system, redesigned for optimal performance.
• A fast disassembly servo mount that allows for easier and faster maintenance on the servos.
• The new gearbox is lighter than previous models.

Rotor head:

• New design that features new blade grip arms with an improved locking system.
• Self-Centering Titanium washers that ensure automatic centering for greater precision.
• Possibility of adding a pivot shaft for the spindle allowing customization of rigidity and maximum movement.

Tail rotor:

• 8 mm Tail shaft with 8x16x5 bearings that contribute to increase rigidity and a smoother tail.
• The shaft and the Hub are made from a single part in order to have maximum precision.
• The tail pulley will be available in 3 different sizes to adjust the tail ratio according to personal preferences.

Tail boom:

• Made with high-pressure molding technology and its weight is only 180 gr.
• Includes a belt tensioning system with an indicator for optimal control

Canopy and blades:

• With its unique design, you do not have to remove the canopy to change the batteries, they can be inserted from the rear with integrated connectors.
• The blades in the kit are the new S702, with new profile and dynamic performance, color-matched to the canopy.
• The tail blades are S110 with a new design for improved performance.

IlGoblin RAW [SG763] Specifications:

• AIRFRAME weight: 2122 gr (no blades, no battery, no electronics).
• Main rotor diameter: 1576 mm (with 700 mm blades).
• Main blade length: 650 to 730 mm.
• Tail rotor diameter: 292 mm (with 110 mm tail blades).
• Tail blade length: 105 to 115 mm.
• Cyclic Servos: Standard size 40 mm.
• Tail Servo: Standard size 40 mm.
• Main Rotor Ratio: 11.8 to 8.8 (21T included: 10.1:1).
• Tail Rotor Ratio: 5.1-4.9:1 (26T included: 4.9:1)
• Main shaft 15 mm, Tail shaft 8 mm
• Aluminum tail boom
• Motor 12S, 480/560 KV
• Battery room: 50x60x300 mm
• 21T motor pulley (other pulley sizes available).
• 1 battery tray with straps.
• S701 (700 mm main blades)
• S105 (105 mm tail blades)

SAB ilGoblin RAW SG763, super combo version: Servos, Motor, ESC

This combo including:

• SAB ilGoblin RAW SG763 Kit, with blades
• Motor scorpion HK5-5024-535kv
  
• ESC Tribunus 220a or Hobbywing 260a
  
• 3 Cyclic servos Savox 1257/8TG or KST(DS745/BLS905 IF stock allows)
• Tail servo Savox 1290mg or KST( IF stock allows)

This is an SAB official nitro conversion for the Kraken model! The kit is manufactured and supported by SAB and includes everything required to convert your electric Kraken kit to a nitro, this conversion includes all the parts such as the fan shroud, fan, clutch, clutch bell, etc. (Excludes motor and electronics).

Includes:

• Finishing Washer M3 x 18goblin-kraken-words-2.jpg
• Servo Spacer x 2
• Finishing Washer M2,5 x 8
• Servo Blockx 2sab-kraken-nitro-conversion-1-woh.png
• Plastic Ball Link M2 x 2
• Uniball M2 maschio x 2
• Nitro Fan A x 1
• Nitro Fan B x 1
• Motor Support DX x 1
• Motor Support LX x 1
• Shaft YS x 1
• Shaft OS x 1sab-kraken-nitro-conversion-ass-woh.png
• Tank Rubber 50 shore x 4
• Clutch x 1
• Fan x 1
• Clutch Support x 1
• Clutch Bell Flange Black Anodizing x 1
• Z26 Nitro Pulley (black anodizing) x 1
• Nitro Pulley Flange x 1
• Motor Frame Spacer x 4
• Engine support spacer x 2
• SAB Fuel Tank x 1
• Alu Tank Support Right x 1
• Alu Tank Support Left x 1
• CF Servo Gas Support x 1
• CF Accessories Support x 1
• Fuel Clunk x 1
• Fuel Nipple x 1
• Fuel Rubber 60 shore x 1
• Better Fuel Stop x 2
• Carbon Insert M2.5 x 4
• Servo Spacer x 2
• CF Sensor Support (2mm) x 1
• H1073 cut slot x 1
• Landing Gear Space kraken Naked x 4
• Main Frame x 2
• Main Frame Spacer x 1
• Cable Pass x 1
• Servo Horn 25T 6mm x 1
• Grommet x 1
• Socket Head Cap M2,5x6 x 2
• Socket Head Cap M2,5x8 x 4
• Socket Head Cap M2,5x10 x 7
• Socket Head Cap M2,5x15 x 4
• Socket Cap M3 x 6 x 1
• Socket M3 x 8 x 9
• Socket Head Cap M3 x 10 x 11
• Socket M3 x 12 x 6
• Socket M3 x 16 x 4
• Button Cap M3x6 x 4
• Button M4 x 8 x 2
• Button M4 x 10 x 4
• Socket Head Cap M4x10 x 4
• Socket M4 x 15 x 4
• Flat M3 x 8 x 6
• Metric Hex Nuts M2 x 1
• Metric Hex Nylon Nuts M2,5 H3,5 x 4
• Metric Hex Nylon Nuts M3 H4 x 4
• Threaded Rod M2x64 x 1
• Radial bearing 12 x 18 x 4mm x 3
• Belt Gates 339-3GT-013 x 1
• Silicone Tube 2.4 x 5.5 x 600mm shore 60 x 1
• Silicone Tube 2.4 x 4.5 x 85mm shore 50 x 1
• Filter 6 x 13.5 x 15mm x 1
• Te 3.2 x 2

SAB MAIN BLADES 420TBS

Specifically designed for Goblin 420 and other helicopters class 420.

Thanks to the variable profile, "SAB Thunderbolt Blades" can increase the performance of your helicopter optimizing efficiency and enhancing the maneuverability in all flight styles. The bi-directional carbon structure ensures high rigidity and strength necessary to withstand very high stress generated by modern 3D helicopters. Include safety wire to prevent the throwing of dangerous fragments in case of a crash.

Technical features:

    Length : 420 mm
    Width : 33/37 mm
    Root : 5 mm
    Bolt Hole : 3 mm

SAB main blades 690tbs x 3

Specifically designed for all Goblin 700 and other helicopters class 700

Thanks to the variable profile, "SAB Thunderbolt Blades" can increase the performance of your helicopter optimizing efficiency and enhancing the maneuverability in all flight styles. The bi-directional carbon structure ensures high rigidity and strength necessary to withstand very high stress generated by modern 3D helicopters. Include safety wire to prevent the throwing of dangerous fragments in case of a crash.

Technical features:

• Length : 690 mm [3 BLADES]
• Width : 56/60 mm
• Root : 12 mm
• Bolt Hole : 5mm

Includes:

- SAB Male Connector D5 (ESC) x 1 set

Used for:

- ILGoblin PRO/RAW

Nylon Screw M8x20 (4pcs) Goblin 630/700 Competition

Includes:

• Nylon Screw M8x20 x 4pcs

Use for:

• Goblin 630/700 Competition

SAB tail blades 105mm x 3

Thanks to the variable chord, the "Thunderbolt Blades" tail rotor blades offer a more reactive response to the pilot command. That means that the tail moves more rapidly and can allows faster maneuvers, but at the same time the blades offer a better controllability of the helicopter.
Each helicopter requires the best possible matching combination of main and tail rotor blades.
Therefore, we have designed the perfect tail rotor blades to suit all your needs.
High performance carbon fiber tail rotor blades. The blades are pre-balanced and ready to fly.

Technical features:

    Length: 105 [mm] [3 BLADES]
    Width: 27/30 [mm]
    Root: 5 [mm]
    Bolt Hole: 3 [mm]

Thanks to the variable chord, the "Thunderbolt Blades" tail rotor blades offer a more reactive response to the pilot command. That means that the tail moves more rapidly and can allows faster maneuvers, but at the same time the blades offer a better controllability of the helicopter.
Each helicopter requires the best possible matching combination of main and tail rotor blades.
Therefore, we have designed the perfect tail rotor blades to suit all your needs.
High performance carbon fiber tail rotor blades. The blades are pre-balanced and ready to fly.

Technical features:

Length: 105 [mm]
Width: 27/30 [mm]
Root: 5 [mm]
Bolt Hole: 3 [mm]

SAB THUNDERBOLT Carbon Main Blade 280mm 280TBS

Technical specifications:
Length: 280mm
Width: 25mm
Connection: 4.9mm
Hole: 2.5mm

Includes:

1set - TB Main Blade (length 280mm)

SAB THUNDERBOLT tail blades 115mm x 3

Thanks to the variable chord, the "Thunderbolt Blades" tail rotor blades offer a more reactive response to the pilot command. That means that the tail moves more rapidly and can allows faster maneuvers, but at the same time the blades offer a better controllability of the helicopter.
Each helicopter requires the best possible matching combination of main and tail rotor blades.
Therefore, we have designed the perfect tail rotor blades to suit all your needs.
High performance carbon fiber tail rotor blades. The blades are pre-balanced and ready to fly.

Technical features:

Length: 115 [mm] [3 BLADES]
Width: 28/31 [mm]
Root: 5 [mm]
Bolt Hole: 3 [mm]

Use for setting Zero Pitch for the Goblin 380
Easy to use with out the need of remove Head system

Includes :

• Swash Leveler x 1pc

Use for :

• Goblin 380

Includes:

- Self Tapping Screw HSBU M3 x12 ( matte) x 8pcs

Used for:

- Goblin Kraken

Description:

Includes:

• 1x Gear Set Cylic Servo DS12C

Use for:

• Goblin Fireball

Description:

Includes:

• 1x Gear Set Tail Servo DS12T

Use for:

• Goblin Fireball

Description:

Includes:

• 8x Shims 2.1x3.6x0.2

Use for:

• Goblin Fireball

- Slant Main Gear x 1set

For Goblin RAW 700/URK Genesis

Includes:

- SLS Antenna Mount x 1pc

- Double Side Tape x 1pc

Used for:

- ILGoblin PRO/ RAW

Socket Head Cap Screw M 2 x 10 mm

Content:

• 5Pcs Socket Head Cap Screw M 2 x 10 mm

- Socket Head Cap Screw M3 x 14 x 5pcs

For Goblin RAW 700

Includes:

- Socket Screw M4 x 20 x 8pcs

Used for:

- Goblin Kraken

Description:

Includes:

• 1 x Standard Landing Gear Red
• 2 x DIN 12.9 Socket Head Cap M3x12

Used For:

• Goblin Comet

Steel Clutch - Goblin Black Nitro

Includes:

• Steel Clutch x 1
• Button Head Socket Cap M4x8 x 2

Use for:

• Goblin Black Nitro

Steel Crank Shaft For OS Engine

Includes:

• Steel Crank Shaft for OS Engine

Use for:

• Goblin Black Nitro

Steel Crank Shaft For YS Engine

Includes:

• Steel Crank Shaft For YS Engine x 1

Use for:

• Goblin Black Nitro

Includes:

• 1 x Steel Main Gear
• 1 x Head Cap Screw M4x30mm
• 1 x Bushing . H1329
• 1 x Spring Washer 10x15x0.3mm
• 2 x Shim 10x16x0.2mm

Used for:

• Goblin Kraken 580

Includes:

- Steel Main Gear Z68 x 1 pc

- Main gear mount x 1pc

- Socket head cap screw M3 x 4 x 5pcs

- Socket head cap screw M4 x 24 x 2pcs

Used for:

- ILGoblin Pro/ RAW