SAB-Goblin

Includes:

- Steel Main Shaft x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- Steel One Way Bushing D10 x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- Steel Washer Ø2 x Ø13.5 x 0.3 x 10pcs

Use for:

- Goblin RAW 420DD/ RAW 420 Competition

Includes:

- Swashplate Autorotation Pin x 1 pc

Used for:

- Goblin RAW 420

Includes:

- Tail Belt Idler x 1 set

Used for:

- Goblin RAW 420

This is a limited edition run in a new colour scheme with a carbon canopy, colored boom

This little heli is designed to run on a 6s pack ranging from 2200 to 2700 mAh and comes with motor and blades. You simply need to get servos (micro cyclic & mini tail), an ESC and a flight controller!
We recommend either the HobbyWing 60 or 80 amp controllers or the Scorpion 06_80. All of these are excellent choices, if you are planing on doing mild 3D or sport flying, the Hobby-wing 60 is the best choice, for harder 3D, then the 80 amp ESCs are preferred.

The kit ships with one battery tray, make sure to get more if you plan on having more than one battery ready to go.

Main Highlights of new Raw 420 from Sab goblin

• Direct Drive Motor (Competition motor included)
• New S Line blades (420mm and 70mm included)
• Quick release battery tray with built-in connectors
• 10mm one way bearing integrated into the motor
• Zytel HTN resin blade grip arms (sacrificial)
• The canopy does not need to be removed to replace batteries
• Neon yellow color for best visibility (available initially in yellow only)
• Carbon fiber molded boom as an option also available

Raw 420 Specifications:

• Airframe weight: 1000 grams (with motor and blades)
• Main rotor diameter 935mm (with 420mm blades)
• Main blade length 380 to 420mm
• Tail rotor diameter 190mm (with 70mm tail blades)
• Tail blade length 60 to 70mm
• Micro size cyclic servos (23mm)
• Mini size tail servo (35mm)
• Maximum battery size 40x54x135mm
• Recommended battery 6s 2200/2700 mAh
• Recommended battery weight 350-420 grams
• Recommended ESC 60 ( 70-80A is required only for hard 3D flight with temperatures above 30°C)
• Tail rotor ratio 4:1
• 8mm main shaft
• 5mm tail shaft

Includes:

- Aluminum Clamp Mount x 1pc

Use for:

- RAW500

Includes:

- Aluminum Front Tail Pulley assembled x 1pc

- Socket Head Cap Screw M3x20mm x 1pc

- Nylon Nut M3 x 1pc

Use for:

- RAW500

Includes:

- Aluminum One Way Hub x 1pc

- Ball Bearing 10x15x4 x 2pcs

- One Way Bearing 10x14x12 x 1pc

- Shim 8.1x10x0.1 x 2pcs

Use for:

- RAW500

Includes:

- Aluminum Tail Pulley x 1pc

- Set Screw M3x4mm x 1pc

Use for:

- RAW500

Includes:

- Ball Bearing 4x8x3 mm x 4pcs

Use for:

- RAW500

Includes:

- Ball Bearing 6x13x5 (MR686ZZ) x 2pcs

Use for:

- RAW500

Includes:

- Ball Bearing 8x19x6 mm x 2pcs

Use for:

- RAW500

Includes:

- Bottom 3rd Bearing Support x 1pc

- Ball Bearing 8x19x6 x 1pc

Use for:

- RAW500

Includes:

- Button Head Cap Screw M5 X 8 x 10pcs

Use for:

- RAW500

Includes:

- RAW 500 Canopy Yellow x 1pc

- Canopy Grommet x 2pcs

Use for:

- RAW500

Includes:

- Carbon Fiber Main Frame Bottom x 1pc

- Foam Canopy Center x 1pc

Use for:

- RAW500

Includes:

- Carbon Fiber Main Frame x 1pc

Use for:

- RAW500

Includes:

- Carbon Rod 2.5 x 4 x 435mm x 1set

Use for:

- RAW500

- RTF weight without battery 1824g
- Main rotor diameter 1180mm (with 500mm blades)
- Length of the tail blades 80mm
- Mini size cyclic servos (35mm)
- Mini tail servo (35mm)
- Maximum dimensions of the battery 48x48x150mm
- Recommended battery 6S 3300/3700 mAh
- Recommended battery weight 550-600g
- Recommended ESC 6S-120A
- Motor size 4020 (800-900Kv)

Main Features

- Quick release battery tray with integrated connectors
- Zytel HTN resin blade grip arms (sacrificial)
- It is not necessary to remove the canopy to replace the batteries
- Main ratio 1:5/6
- Tail ratio 4:1
- Main rotor diameter 1180mm (with 500mm Main Blades)
- Main blade length 501mm
- Tail rotor diameter 218mm (with 80mm Tail Blades)
- Tail blade length 80mm
- Main shaft diameter 8mm
- Tail shaft diameter 5mm
- weight 1824g w/o battery

- Cyclic Servos Mini Size 35mm
- Tail Servo Mini Size 35mm
- Typical speed controller 6S 120A
- Maximum motor size 52 mm diameter x 55 mm height
- Motor KV 4020 (800-900Kv)
- Battery compartment 48x48x150mm

This is the super combo of sg520 RAW500

See below the options of your choice. if you wish to have other options, contact us

included in the combo!

Sab RAW 500 SG520 kit with direct drive motor, blades.
Motor Scorpion HK5-4020 850kv RAW 500 special
3 x CYCLIC Servos: KST X15-1208
1x Tail servo KST X15-755
1 x ESC Hobbywing 150Amps 6s

Some accessories such connectors, etc might  be need to be purchased separately.

Includes:

- Insert M2.5 x 6pcs

- Derlin Spacer 4 x12x2.8 x 6pcs

Use for:

- RAW500

Includes:

- Oring 9.52x1.78 x 4pcs

- Oring 3.98x1.78 x 2pcs

Used for:

- Goblin RAW500

Includes:

- Main Blades Holder x 1pc

Used for:

- Goblin RAW500

Includes:

- Motor Belt HTD3 375mm x 1pc

Use for:

- RAW500

Includes:

- Motor Belt Idle Pulley x 1set

Use for:

- RAW500

Includes:

- Canopy Base Position x 2pcs

- Canopy Base Position Lock x 2pcs

- Canopy Grommet x 2pcs

- Quick Release Canopy x 2pcs

Use for:

- RAW500

Includes:

- Plastic Battery case x 1set

- Female Connector x 2pcs

- Finishing Washer M2.5 x 2pcs

- Socket Head Cap Screw M2x6mm x 1pc

- Socket Head Cap Screw M2.5x12mm x 2pcs

Use for:

- RAW500

Includes:

- Steel One Way Pulley Bushing x 1pc

- Brass Washer x 1pc

Use for:

- RAW500

Includes:

- Sticker Set Yellow x 1set

Use for:

- RAW500

Includes:

- Thread Rod HEX M2x32mm x 1pc

- Thread Rod M2x22mm x 2pcs

- Thread Rod HEX M2x22mm x 2pcs

Use for:

- RAW500

Includes:

- Tail Belt 2M - 1500 x 1pc

Use for:

- RAW500

Includes:

- Socket Head Cap Screw M2.5x6mm x 2pcs

- Washer 2.6x6x0.5 x 2pcs

- Shim 4.05x5.6x0.1 x 2pcs

- Oring 3.98x1.78 x 2pcs

- Thrust Bearing 4x8x3.5 x 2pcs

- Washer 4.05x 6.5x0.3 x 2pcs

- Washer 6.1x7.9x0.5 x 2pcs

Use for:

- RAW500

Includes:

- Thrust Bearing 6x 12x4.5mm x 2pcs

Use for:

- RAW500

This kit is like SG520 kit but with Canopy White H1930-S and Boom White H1935-S

Specifications

- RTF weight without battery 1824g
- Main rotor diameter 1180mm (with 500mm blades)
- Length of the tail blades 80mm
- Mini size cyclic servos (35mm)
- Mini tail servo (35mm)
- Maximum dimensions of the battery 48x48x150mm
- Recommended battery 6S 3300/3700 mAh
- Recommended battery weight 550-600g
- Recommended ESC 6S-120A
- Motor size 4020 (800-900Kv)

Main Features

- Quick release battery tray with integrated connectors
- Zytel HTN resin blade grip arms (sacrificial)
- It is not necessary to remove the canopy to replace the batteries
- Main ratio 1:5/6
- Tail ratio 4:1
- Main rotor diameter  1180mm (with 500mm Main Blades)
- Main blade length  501mm
- Tail rotor diameter  218mm (with 80mm Tail Blades)
- Tail blade length  80mm
- Main shaft diameter  8mm
- Tail shaft diameter  5mm
- weight  1824g w/o battery

- Cyclic Servos  Mini Size 35mm
- Tail Servo  Mini Size 35mm
- Typical speed controller  6S 120A
- Maximum motor size  52 mm diameter x 55 mm height
- Motor KV  4020 (800-900Kv)
- Battery compartment  48x48x150mm

SAB Goblin RAW 580 2s optional Battery support #H1131

Includes:

Battery plate
3 screws

Used for:

• Goblin RAW 580