SAB-Goblin

Includes:

- Radial Bearing 3 x 6 x 2.5 x 4pcs

Use for:

- Goblin 380

Includes:

- Radial Bearing 3 x 7 x 3 x 4pcs

Use for:

- Goblin 380

Includes ;

- Aluminum Radius Arm x 2pcs

- Plastic Radius Arm x 1pc

- Hexagon Spacer x 1pc

- Brass Spacer Arm x 2pcs

- Socket Screw M3 x 12 x 2pcs

- Socket Screw M2.5 x 8 x 2pcs

- Flanged Bearing 2.5 x 6 x 2.5 x 2pcs

- Flanged Bearing 3 x 7 x 3 x 4pcs

Use for:

- Goblin 500/570 using HPS3

- Aluminum Radius Arm Black Matte x 2pcs

- Plastic Radius Arm x 2pcs

- Socket Head Cap M2 x 10 x 4pcs

- Flanged Bearing 2 x 5 x 2.5 x 8pcs

Use for:

- Goblin RAW 420

Includes:

- Aluminum Boom Block Support x 1 pc

Used for:

- Goblin RAW 420

Includes:

- Aluminum ESC Mount x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- Aluminum Front Pulley Z80 x 1pc

- Shoulder Socket Head Cap Screw M3 x 18 x 1pc

- Metric hex locknut Nuts M3 H4 x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- Aluminum Main Blades Grip x 2pcs

- Radial Bearing 5 x 10 x 4 x 4pcs

- Brass Washer Washer 7.5x 10 x 0,5 x 2pcs

- Thrust Bearing 5x 10 x 4 x 2pcs

- Button Head Screw M4 x 6 x 2pcs

Used for:

- Goblin RAW 420

Includes:

- Aluminum Main Plate x 1pc

- Radial bearing x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- Aluminum Motor Mount x 1pc

- Socket Head Cap Screw M2.5 x 8 x 2pcs

- Aluminum M2.5 washer x 2pcs

- Socket Head Cap Screw M4 x 8 x 1pc

- Washer 4,3 x 11 x 1 x 1pc

- Metric Hex Nylon Nuts M4 H5 x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- Aluminum Radius Arm x 1set

Use for:

- RAW 420 Competition

Includes:

- Aluminum Tail Servo Mount x 2pcs

- Socket head Screw M2.5 x 8 x 2pcs

- Socket head Screw M2.5 x 10 x 2pcs

Use for:

- RAW 420 Competition

Includes:

- G10 Battery Tray with Connector x 1 set

Used for:

- Goblin RAW 420

Includes:

- G10 battery tray x 1pc

- SAB double side tape x 1pc

- Battery strap x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- G10 battery tray x 1pc

- SAB double side tape x 1pc

- Battery strap x 1pc

- SAB Battery connector x 1set

Used for:

- Goblin RAW 420 Competition

This is a limited edition run in a new colour scheme with a carbon canopy, colored boom

This little heli is designed to run on a 6s pack ranging from 2200 to 2700 mAh and comes with motor and blades. You simply need to get servos (micro cyclic & mini tail), an ESC and a flight controller!
We recommend either the HobbyWing 60 or 80 amp controllers or the Scorpion 06_80. All of these are excellent choices, if you are planing on doing mild 3D or sport flying, the Hobby-wing 60 is the best choice, for harder 3D, then the 80 amp ESCs are preferred.

The kit ships with one battery tray, make sure to get more if you plan on having more than one battery ready to go.

Main Highlights of new Raw 420 from Sab goblin

• Direct Drive Motor (Competition motor included)
• New S Line blades (420mm and 70mm included)
• Quick release battery tray with built-in connectors
• 10mm one way bearing integrated into the motor
• Zytel HTN resin blade grip arms (sacrificial)
• The canopy does not need to be removed to replace batteries
• Neon yellow color for best visibility (available initially in yellow only)
• Carbon fiber molded boom as an option also available

Raw 420 Specifications:

• Airframe weight: 1000 grams (with motor and blades)
• Main rotor diameter 935mm (with 420mm blades)
• Main blade length 380 to 420mm
• Tail rotor diameter 190mm (with 70mm tail blades)
• Tail blade length 60 to 70mm
• Micro size cyclic servos (23mm)
• Mini size tail servo (35mm)
• Maximum battery size 40x54x135mm
• Recommended battery 6s 2200/2700 mAh
• Recommended battery weight 350-420 grams
• Recommended ESC 60 ( 70-80A is required only for hard 3D flight with temperatures above 30°C)
• Tail rotor ratio 4:1
• 8mm main shaft
• 5mm tail shaft

Includes:

- RAW 420 canopy x 1 pc

- Double Side Tape x 2pcs

- Rubber Washer x 2pcs

Used for:

- Goblin RAW 420

Includes:

- Carbon Fiber Main Frame x 1pc

- Sticker Set x 1pc

- Side frame mousse x 1pc

Used for:

- Goblin RAW 420 Competition

Includes:

- Carbon Fiber Tail Fin x 1 pc

- Orange Sticker x 1pc

- Button Head Cap M2,5x6 Special x 2pcs

Use for:

- RAW 420 Competition

Includes:

- Carbon Fiber Tail Push Rod x 1pc

- M2.5 Aluminum Tail Rod End x 2pcs

- Plastic Ball linkage x 2pcs

Use for:

- RAW 420 Competition

Includes:

- Aluminum Center Hub x 1 pc

- Socket head cap shoulder screw M3 x 16 x 1pc

- M3 Lock nut x 1pc

Used for:

- Goblin RAW 420

Includes:

- RAW 420 Canopy x 1pc

- Canopy Grommet x 2pcs

Use for:

- RAW 420 Competition

This is how the RAW 420 Competition was born. Lighter, faster, more flexible in the selection of the desired head speed at a higher performance level.

Specification:

• Main rotor diameter 935mm (with 420mm blades)

• Main blade length 380 to 420mm

• Tail rotor diameter 190mm (with 70mm tail blades)

• Tail blade length 60 to 70mm

• Micro size cyclic servos (23mm)

• Mini size tail servo (35mm)

• Maximum battery size: 140x40x50mm (max)

• Recommended battery: 6s 2200/2700 mAh

• Recommended motor: 3020 – 3215 – 3220

• Recommended KV motor: 900-1000 KV

• Recommended battery weight: 350-420 grams

• Recommended ESC: 60 (70-80A is required only for hard 3D flight with temperatures above 30°C)

• Tail rotor ratio 4:1

• 8mm main shaft

• 5mm tail shaft

Raw 420 Competition main features:

• Quick release battery tray with integrated connectors

• Zytel HTN resin blade grip arms (sacrificial)

• It is not necessary to remove the canopy to replace the batteries.

• Main ratio 1:5/6

• Tail ratio 4:1

One of the most revolutionary helicopters of today. The Raw 420 has an incredibly large, direct drive motor offering superb performance for 3D pilots and incredible efficiency for sport flyers and beginners alike!

This little heli is designed to run on a 6s pack ranging from 2200 to 2700 mAh and comes with motor and blades. You simply need to get servos (micro cyclic & mini tail), an ESC and a flight controller!
We recommend either the HobbyWing 60 or 80 amp controllers or the Scorpion 06_80. All of these are excellent choices, if you are planing on doing mild 3D or sport flying, the Hobby-wing 60 is the best choice, for harder 3D, then the 80 amp ESCs are preferred.

The kit ships with one battery tray, make sure to get more if you plan on having more than one battery ready to go.

Main Highlights of new Raw 420 from Sab goblin

• Direct Drive Motor (Competition motor included)
• New S Line blades (420mm and 70mm included)
• Quick release battery tray with built-in connectors
• 10mm one way bearing integrated into the motor
• Zytel HTN resin blade grip arms (sacrificial)
• The canopy does not need to be removed to replace batteries
• Neon yellow color for best visibility (available initially in yellow only)
• Carbon fiber molded boom as an option also available

Raw 420 Specifications:

• Airframe weight: 1000 grams (with motor and blades)
• Main rotor diameter 935mm (with 420mm blades)
• Main blade length 380 to 420mm
• Tail rotor diameter 190mm (with 70mm tail blades)
• Tail blade length 60 to 70mm
• Micro size cyclic servos (23mm)
• Mini size tail servo (35mm)
• Maximum battery size 40x54x135mm
• Recommended battery 6s 2200/2700 mAh
• Recommended battery weight 350-420 grams
• Recommended ESC 60 ( 70-80A is required only for hard 3D flight with temperatures above 30°C)
• Tail rotor ratio 4:1
• 8mm main shaft
• 5mm tail shaft

This is the super combo of SG421 RAW420

this set delivered with Servos, ESC

Sab RAW 420 kit with direct drive motor, blades.

3 x CYCLIC Servos: KST MS325 or X12-508

1x Tail : KST DS565  or X15-755 OR X15-855

1 x ESC scorpion Tribunus  or HW 80amp

Optional : Lipo SLS 6S 2200/2600, MADE for goblin*

Some accessories such connectors, etc might  be need to be purchased separately.

* Optional add on

Includes:

- Flat Head Cap Screw M2.5 x 10 x 10 pcs

Use for:

- RAW 420 Competition

Includes:

- G10 Wiring Support x 1pc

- Aluminum bushing x 2pcs

Use for:

- RAW 420 Competition

Includes:

- Motor Belt HTD 2M 352-09 x 1 pc

Use for:

- RAW 420 Competition

Includes:

- Plastic Antenna Mount D20 x 1pc

Use for:

- RAW 420 Competition

Includes:

- Plastic Battery Tray Guide x 1set

Used for:

- Goblin RAW 420 Competition

Includes:

- Plastic Main Pulley Z120 x 1pc

- Aluminum One Way Hub x 1pc

- Steel shim 10mm x 2pcs

Use for:

- RAW 420 Competition

Includes:

- Aluminum Tail Boom Matte Orange x 1 pc

Used for:

- Goblin RAW 420

Includes:

- Plastic ESC case x 1set

- Male Connector x 2pcs

- Finishing Washer M2.5 x 2pcs

- Socket Head Cap Screw M2x6mm x 1pc

- Socket Head Cap Screw M2.5x20mm x 2pcs

Use for:

- RAW500

Includes:

- Self Taping Screw M2.5 x 6 x 10 pcs

Use for:

- RAW 420 Competition

Includes:

- Socket Head Cap Screw M2.5 x 20 x 10 pcs

Use for:

- RAW 420 Competition

Includes:

- Socket Head Cap Screw M4 x 12 x 10 pcs

Use for:

- RAW 420 Competition