SAB-Goblin

GOBLIN Kraken Transmission Bearing Set

Includes:

• 1 x Bearing 12 x 24 x 6
• 2 x Bearing 8 x 16 x 5 (MR688-2RS)
• 2 x Bearing 10 x 22 x 6 mm ( 6900-2RS)
• 1 x Bearing 12 x 28 x 7mm ( 16001-2RS)
• 3 x Ball Bearing 6x13x5 (MR686ZZ)

Used for:
Goblin Kraken

GOBLIN Kraken White Landing Gear

Includes:

• 2 x Landing Gear Kraken (white)
• 4 x Set screw M4 x 4
• 4 x Metric Hex Nylon Nuts M3 H4

Used for:
Goblin Kraken

Making a comparison with Urukay Genesis, the famous model developed to win in the F3C category, here are the main differences:

• Longer boom that will enable the use of 800mm blades.
• 3-Bladed tail rotor in order to give the correct authority.
• Rigid transmission module with longer main shaft.
• Aggressive graphic scheme.

These are the characteristics of the Urukay Maverick, an important model, prestigious, and perfect for an exciting, powerful and realistic flight… The sound of the 800mm blades is amazing!

( the KIT includes the simulation of the side missiles )

Technical Specifications :

• AIRFRAME weight: 4250gr (with blades, no battery, no electronics)
• Main blade length: 2x 800mm
• Tail blade length: 3x 115mm
• Main rotor diameter: 1768 mm (with 800 mm blades included)
• Tail rotor diameter: 305 mm (with 115 mm tail blades included)
• Cyclic Servos: standard size 40mm
• Tail Servo: standard size 40mm
• Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)
• Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
• Typical motor: 4530 series
• Typical speed controller: 12S, 160-200 A
• Battery size: 12S 4500/5500 mAh

This is the Super combo of Sab Maverick SG800 helicopter. the package will include the following:

Kit Maverick SG800
Motor Scorpion 4530-500KV or 4525-520kv
ESC Scorpion Tribunus 200 or HW 200Amp esc
Cyclic Servos : Savox 1257TG/1258TG  x 3 or KST DS725 x 3
Tail Servo : Savox 1290MG or KST BLS 905 x 1

* Choice is offered based on Stock situation.

Goblin Niitro Servo Gas Support #H0691

Goblin Niitro Servo Support #H0692

fan not included

Goblin Raw 580 ALUMINUM LANDING GEAR MOUNT H1408

Includes:

- Aluminum Landing Gear Mount x 4pcs

- Socket Head Cap Screw M2.5 x 8 x 8pcs

Used for:

- Goblin RAW Nitro

Goblin Raw 580 ALUMINUM TAIL BELL CRANK LEVER #H1393

includes:

- Aluminum Tail Bell Crank Lever Assembled x 1pc

- Steel Uniball M3 x 2pcs

- Stell Uniball M2 x 1pc

- Socket Scew M2.5 x 18 x 1pc

- Socket Scrw M2 x 6 x 1pc

Used for:

- Goblin RAW Nitro

Goblin Raw 580 BLUE/ORANGE STICKERS #HA093

Includes:

- Blue Stickers x 1set

- Orange Stickers x 1set

Used for:

- Goblin RAW 580

Goblin Raw 580 PLASTIC LANDING GEAR WHITE #H1407

Includes:

- Plastic White Landing Gear x 2pcs

- Set Screw M4 x 4 x 4pcs

Used for:

- Goblin RAW Nitro

Goblin Raw 580 TAIL BOOM TENSION 30MM #H1402

Includes:

- Aluminum Tail Boom Tension 30mm x 1set

Used for:

- Goblin RAW Nitro

Goblin Raw 580 YELLOW/GREEN/WHITE STICKERS

Includes:

- Yellow Stickers x 1set

- Green Stickers x 1set

- White Stickers x 1set

Used for:

- Goblin RAW 580

Goblin RAW 700 "Skeleton" Pod-and-Boom model , Kit version, Neon Yellow

RAW TECHNICAL SPECIFICATIONS

1. AIR FRAME weight: 2620gr (with blades, no battery, no electronics)
2. Main blade length: 650mm to 720mm
3. Tail blade length: 105 to 115 mm
4. Main rotor diameter: 1548 mm (with 690 mm blades included)
5. Tail rotor diameter: 284 mm (with 105 mm tail blades included)
6. Cyclic Servos: standard size 40mm
7. Tail Servo: standard size 40mm.
8. Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)
9. Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
10. Typical motor: 4525 series
11. Typical speed controller: 12S, 160-200 A
12. Battery size: 12S 4500-5500 mAh.

1. Included in the kit
   
      2 x battery rails
2. 1 x 21T belt pulley
3. 1 x 690mm SAB rotor blades
4. 1 x 105mm SAB tail rotor blades
5. manual

Goblin RAW 700 "Skeleton" Pod-and-Boom model ,White-Orange Kit #SG738

RAW TECHNICAL SPECIFICATIONS

1. AIR FRAME weight: 2620gr (with blades, no battery, no electronics)
2. Main blade length: 650mm to 720mm
3. Tail blade length: 105 to 115 mm
4. Main rotor diameter: 1548 mm (with 690 mm blades included)
5. Tail rotor diameter: 284 mm (with 105 mm tail blades included)
6. Cyclic Servos: standard size 40mm
7. Tail Servo: standard size 40mm.
8. Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)
9. Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
10. Typical motor: 4525 series
11. Typical speed controller: 12S, 160-200 A
12. Battery size: 12S 4500-5500 mAh.

The power available in a nitro model is half the power of the electric model.

The search for lightness is fundamental... for this reason, the RAW 700 NITRO uses a mix of solutions between size 700 and size 600, looking for the maximum optimization of all the parts.

The result is a model of about 4Kg (No fuel) ready to fly.

With this weight, the engine never loses rpm, the feeling is like having an electric model in your hands.

Goblin RAW NITRO, The lightest 700 sized nitro from SAB

RTF Approx. Weight: 4040 g (RTF no fuel)
Main blade length: 650mm to 720mm ( 690mm included )
Tail blade length: 105 to 115 mm ( 105mm included )
Main rotor diameter: 1558 mm (with 690 mm blades)
Tail rotor diameter: 284 mm (with 105 mm tail blades)
Engine: .90 to .105 Nitro Heli Engine
Cyclic Servos: Standard size 40mm
Tail Servo: Standard size 40mm
Throttle Servo: Mini size 35 mm or Standard size 40mm
Main Rotor ratio: 7.7- 8.3 :1 (27T included: 8:1)
Tail Rotor ratio: 5.1 - 4.9:1 ( 22T included: 5.1:1 )
Tank Capacity: 650ml
RX Battery Size: 2S-1800 / 2500 mAh

This is full upgraded RAW, with a super aggressive graphic, light landing gear and carbon tail boom…

Just for pilots who want the best!

Technical Specifications :

• AIRFRAME weight: 2920gr (with blades, no battery, no electronics)
• Main blade length: 690mm
• Tail blade length: 105mm
• Main rotor diameter: 1582 mm (with 690 mm blades included)
• Tail rotor diameter: 285 mm (with 105 mm tail blades included)
• Cyclic Servos: standard size 40mm
• Tail Servo: standard size 40mm
• Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)
• Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
• Typical motor: 4525 series
• Typical speed controller: 12S, 160-200 A
• Battery size: 12S 4500-5500 mAh

This is a super combo of SG743 Kyle stacy, including the following items

• Kit SG743 kyle stacy- 3 bladed helicopter (with blades, no battery, no electronics)
• Cyclic Servos:Savox 1257TG/1258TG or KSTds725 x 3
• Tail Servo: Savox 1290mg or KST BLS915
• Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)
• Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
• Typical motor: 4530-540 Scorpion
• Typical speed controller: Tribunus+ 14s200a or HW260a

Goblin RAW 700 KSE super combo

This combo including:

• Raw KSE SG743 Kit, with blades
• Motor scorpion HKII 4525-520kv Ultimate
• ESC Tribunus II+ 14s-200Amps
• 3 Cyclic servos Savox 1257/8TG or KST(DS745/BLS905 IF stock allows)
• Tail servo Savox 1290mg or KST( IF stock allows)

Goblin RAW 700 PIUMA, super combo version , Servos, Motor, ESC

This combo including:

• Raw PIUMA SG749 Kit, with blades
• Motor scorpion HK5-4026-1115kv
  
• ESC 120 Amps HW/scorpion
• 3 Cyclic servos Savox 1257/8TG or KST(DS745/BLS905 IF stock allows)
• Tail servo Savox 1290mg or KST( IF stock allows)

Goblin THREAD ROD pushrod m2.5x18, 10 pcs

Goblin Urukay Aluminum Tail Servo Support

Goblin Urukay Carbon Fiber Tail Push Rod

Especially for Goblin Urukay

Includes:

• Carbon Rod 4 X 2,5 X 851mm x 1pc
• Plastic Ball Linkage x 2pcs
• Threat Rod M2.5 x 40 x 2pcs

Goblin Urukay Carbon HF3C Center Hub

Included:

• Aluminum Center Hub HF3C x 1pc
• Shoulder cap screw M4x24 x 1pc
• Metric hex locknut Nuts M4 H5 x 1pc
• DIN 12.9 Socket Head Cap M3x12 x 2pcs

Goblin Urukay Carbon High Strength Steel Spindle Shaft

Includes:

• High Strength Steel Spindle Shaft x 1pc
• Socket Screw M6 x 10 x 2pcs
• Steel Washer M6 x 2pcs

There are many details that bring the Urukay Genesis to the top as gearbox, special main shaft, new rotor head geometry…

The new fuselage is extremely modern and effective in terms of flight line presentation, it completes the features that make the Urukay Genesis a model ready for any challenge.

Specifications :

AIRFRAME weight: 2950gr (with blades, no battery, no electronics)

Main blade length: 690mm to 760mm

Tail blade length: 105 to 115 mm

Main rotor diameter: 1662 mm (with new F3c 747 mm blades included)

Tail rotor diameter: 284 mm (with 105 mm tail blades included)

Cyclic Servos: standard size 40mm

Tail Servo: standard size 40mm

Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)

Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)

Typical motor: 4525 series

Typical speed controller: 12S, 160-200 A

Battery size: 12S 4500-5500 mAh

ROTOR HEAD

Ultra-light, 7075 aluminum alloy highly adjustable rotor head. The head allows for a very broad range of dampening setups. The dampers are composed of 3 O-rings (these define the rigidity) and a techno polymer damper (that defines the maximum possible movement of the spindle). Using different O-ring and dampers you can setup a different feeling of the model. The 35 mm use blade grips are optimized for F3C.

POWER TRAIN

Power train is fully enclosed in an aluminum case. Helical gears, Delrin swashplate guide, separate top bearing. We looked for the most innovative and avant-garde solutions.

CONICAL MAIN SHAFT-HUB

Conical coupling between main shaft and hub. This type of connection ensures excellent coaxially.

TAIL ROTOR

An ultra-light tail case with quick and easy tail fin replacement. Very simple, strong, reliable & durable. Large diameter tail drive pulleys allow for maximum efficiency in power transfer.

• Aluminum Tail Blade Grip x 2pcs
• ABEC-5 Bearing 4 x 9 x 2,5 x 4pcs
• Spacer 7 x 9 x 0,5 x 2pcs
• Thrust bearing 4 x x 4 x 2pcs
• DIN 12.9 Socket Head Cap  M3x6 x 2pcs
• DIN 12.9 Button Head Cap M2x6 x 2pcs

Use for Goblin 500/570

Includes:

- CF Upper Main Frame 1 pc

Used for:

- ILGoblin PRO/RAW

- Hardware Set x 1set

For Goblin RAW 700

Heavy Duty Tail Pulley 24T Black Anodized

Content:

• Aluminum Tail Pulley 24T x 1
• DIN 12.9 Cone Point Set Screws M4x4 x 2pcs

Use for:

• Goblin 770/770CO/Urukay/Goblin 700 KSE

High Performance HTD Motor Belt 204T Goblin 500

Includes :

• Motor Belt 204T x 1pc

Use for :
Goblin 500 using full size servos/Goblin 500 Sport

Description:

Includes:

• High Performance HTD Motor Belt 255-19 - 1pc

Use For:

• Goblin Comet

High Performance HTD Motor Belt For Goblin 570

HPS Goblin 630/700/770/Nitro O-ring 3050 (4pcs)

Includes:

- CF Lower Side Frame x 1pc

- Sticker for Frame x 1 set

Used for:

- ILGoblin PRO/RAW

Includes:

- Carbon Fiber boom Yellow x 1pc

- Locking Element Tail 30 x 2pcs

- CF Block Nut M3 x 2pcs

- Double side tape x 2pcs

- CF Boom Spacer x 2pcs

Used for:

- ILGoblin PRO

Includes:

- CF ILGoblin Pro Canopy Yellow x 1pc

- Canopy Grommet x 2pcs

Used for:

- ILGoblin PRO