Robbe-Schluter

Horizontal Fin Robbe Futura, Millenium

HEXAGON LOCK  NUT M2 5PCS

LOCK NUT M3 10PCS

LOCK NUT M4 5PCS

Fits the OS /TT /Webra 60-105 motors: ALL versions.
1 PCS in package

Long nut YS MOTORS

1 pcs in package

Longer aluminum Pitch compensator arms CNC 51mm machined ( 2 Arms) Gives increased pitch range without large movement. Prevent Bending

SPACER BOLT SW7X61 AL

FRONT BRACE SHORT

MILLENIUM CLUTCH HUB

This CNC-machined motor mount plate fits between the motor mounts of the „Millennium and „Nova series of models. The result is a box profile between motor and side frames, providing extra rigidity. This upgrade part has proved to offer a real advantage when using the more powerful glowplug motors. It must be used in conjunction with the fueltank S 4809.Set contents ´Motor mount plate´Fixings This CNC-machined motor mount plate fits between the motor mounts of the „Millennium and „Nova series of models. The result is a box profile between motor and side frames, providing extra rigidity. This upgrade part has proved to offer a real advantage when using the more powerful glowplug motors. It must be used in conjunction with the fueltank S 4809.Set contents ´Motor mount plate´Fixings

MOTOR MOUNT PLATE

Motor Spacer 0.8

Made from Aftermarket High Density material , fits All clutch systems in thickness of 1 or 1.5mm

4 pieces of 180x12mm (can be delivered or as 1 pcs 60 x 200mm +-) for easier personal adaptation

DO NOT USE a normal Epoxy, it will not work!!! Best glue to use JB WELD(click to see)

Why do i need aftermarket material?

The material used in today systems example Align, and others is very thin, around 0.8-1mm.

After seen a lot of clutches broken in the air, the solution is  aftermarket material.

The main reason for those breaking clutches is the distance between the clutch and the material.

Example, the diameter of clutch (metal ) is 53mm, and the liner installed is 54. 1mm is free space allow the clutch to expand.

Material which clutch made from is spring metal which expand with turning, but it is very limited, and can expand to 0.3-0.5mm ,if more space is there, the clutch might break.

So if you need to change the liner, use thicker material and do the following:

Measure the clutch and the clutch bell, lets assume the clutch is 53mm, and the bell is 56.

If you put 1mm, it will be 54mm, so 1mm too much space- risk to break.

If you use 1.5mm, its better, however the clutch will be tight to insert,

In this case prepare the liner, and put manually into the clutch bell, if the clutch doesn’t go inside, please take it out and with the help of sandpaper 80-120, sand little for all the length and do the fit again.

You need to come to the point when the clutch will enter with a little force, and will show like it turns not easy.. but still turns. At this stage, glue all and make the fit test, if needed, sand the material inside the bell .

The result- after you start the heli first time, the clutch will show difficulty to turn, but after 2-3 flight it will “find it way” and it will have perfect fit. And it will last for very long time.

O-RING 7X3 (2pcs) for Robbe helicopters Head dampening #S3506

O-RING DAMPENER INSERT

PADDLE WEIGHT SPIRIT M-8 AL 2PCS

Pinion gear, Fits Robbe Millenium , Avaliable in 15 T. Makes perfect Ratio for 80-90 size motors.

Extended Pinion to fit Millenium Helis, This pinion will make ratio 1:8 for 90 size motors
The longer sleeve is especially for double Bearing block

PITCH COMPENSATOR HUB 10mm shaft

PLATFORM 44X61 KST 3PCS.