Robbe

ELEVATOR ARM SET

ENGINE MOUNT SHIMS , 2pcs

A must for turbine smooth high speed running and accurate cyclic response. Crafted from solid in a single fully automated machining operation this headblock is supremely accurate, very strong and light.

This component has been designed to prevent movement of the tail drive pinion gear. Often the threads in the original plastic unit are overtightened and damaged resulting in the gear lifting out of correct mesh. Our alloy unit provides secure threads that can be fully tightened time after time. Supplied complete with shorter M2.5 socket screws for minimal weight, new bearings are pre-installed. The completed assembly is no heavier than the stock plastic part.

For connecting LiPo batteries with Thunder or Flight-Power Balance sensor leads or battery chargers with Equalizer. Can be used with 4 or 8S Equalizers.

For connecting LiPo batteries with Thunder or Flight-Power Balance sensor leads to robbe Equalizers or battery chargers with Equalizer.
Various connecting leads are supplied with the adaptors. Can be used with 5 or 6S Equalizers. Matches the Lipoly Equalizer 5S, the TOP Equalizers 6S, 6S 300 and 12S, and Duo Power 6S, Optimate and Eternity battery chargers

FEATHERKEY 5X3X10

FEATURES: Great for adding strength to surfaces 90° cross weaves with white coloring
Consistent weaves for smoother finishes

INCLUDES: One Medium weight strip 5cm x 100cm 165 g/m²

 Flybar set for the Bravo III

FREE-WHEEL COVER

S4607 - FREE-WHEEL HUB MOUNTED

FREE-WHEEL- Special Sprague Bearing

FRONT CLUTCH, MOUNTED AL

FRONT STRUCTURE EXTENSION

Lightweight and small 6-channel 2.4 GHz FHSS / S-FHSS receiver for indoor and park flyers.

Compatible with all FHSS FHSS and S-systems from Futaba program. Also offers a high response mode for digital servos.

Failsafe setting for all channels possible. Easy connectivity through Easy Link transmitter button. best possible protection from interference by fast frequency hopping.

High intermediate frequency of 800 MHz and so insensitive to electromagnetic pollution.

Not compatible with FASST transmitters!

Futaba R3008SB 2.4GHz FHSS Telemetry Receiver 10J

The R3008SB is a T-FHSS telemetry-capable receiver that features S.Bus and S.Bus2 compatibility and 8 conventional ports. The receiver also features an external battery voltage connector.

Size: 24.9 x 47.3 x 14.3mm
Weight: 10.1g
Power Requirement: 4.8-7.4V
Battery F/S Voltage: Sets up with a transmitter
Extra Voltage Port: 0 ~ 70V DC

Not compatible with S-FHSS/FHSS/FASST/FASSTest systems.

Compact, lightweight R7003SB 2.4 GHz FASSTest receiver with integral telemetry transmitter.

• Smaller, only 7g, lighter 3 /18 - channel 2.4GHz FASSTest S.BUS-Receiver with full range and integrated Telemetry transmitter.
• Ultra-slim for models with narrow fuselages.
• With the S-BUS system for up to 18 channels, making it suitable for all models from mini-helicopters to large-scale aircraft.
• Normal PWM-output
• The 3 PWM-Servo channels outputs are divided in 7 groups of outputs Port 1 and 2, whereby the output allocation may be freely selected.
• S.BUS output Up to 18 of the new, programmable S-BUS servos or peripheral devices such as gyros,
• Flybarless systems or speed controllers can be attached in series directly to this output.
• One feed cable for all channels.
• No cable „spaghetti“, and reduced weight.
• All standard servos can be connected to receivers with an S.BUS PWM adapter.
• It does not get any simpler.
• High Response
• Switchable output speed of the control pulse for digital servos, 6.3 ms instead of 16 ms,
• which leads to a still shorter reaction time.
• Aerial Diversity
• The 2 Aerial Diversity system continuously checks the signal level at both aerial inputs and switches over in a split second to the stronger signal with no transition period.

Telemetry

• S.BUS2 devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted.
• The receiver‘s integral transmitter sends the telemetry data present at the S.BUS2 socket to the FASSTest transmitter, where the data are displayed on-screen or generated in audible form.
• Alternatively, the data can be transmitted to a separate Telemetry-Box.
• When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.

Power

• A further voltage range from 3.7…7.4 V nominal voltage, when using 7.4 LiPo-Batteries for receiver power, all connected servos must possess the appropriate voltage capability.
• The receiver does not feature an internal servo voltage limiter for the high voltage servo voltage.

Recommended accessory:

• F1001100 „Extra Voltage“ connecting lead with fuse.

Specification:

• Frequency band 2.4 – 2.4835 GHz
• Spot frequencies 36
• Channel count 18
• Channel spacing 2048 kHz
• Transmission system FASSTest
• Voltage 3.7...7.4 Volt (4 - 5 Nx, 2 LiFe, 1 - 2 LiPo)
• Current 50 mA
• Dimensions 37.4 x 22.5 x 9.3 mm
• Aerial length 14 cm
• Weight approx. 7,2 g

Set contents
Including adapter for the „Extra Voltage“ connecting lead at Port 2.
 

Gear Set For Futaba Servo S9201/9202/9304

HEXAGON SPACER

Horizontal Fin Robbe Futura, Millenium

Jonny 2 is the official successor of the legendary Jonny by Ing.Wilfried Klinger. At that time it was designed for glow ignition engines, but we have consistently further developed the model for electric drives. The Jonny 2 is significantly lighter and more maneuverable than its predecessor and is unbelievable fun. The Jonny is the ideal all-round model for every day. No matter if beginner, advanced or professional: The Jonny inspires every pilot. The Jonny can easily tow sailors with a wingspan of up to 3 m. With the floats available as accessories, the Jonny is also perfect for sea flights. The attachment points on the fuselage floor are provided at the factory.

Product

features * ARF finished model in wood construction (laser cut)

* Fully covered as shown

* Highest degree of prefabrication

* Two-part wings with aluminum tubes

* Robust undercarriage made of duralumin

* Good-natured flight characteristics * Fully aerobatic

* Wheels, articulations, small parts, illustrated Instructions

Technical data

• Wingspan = 1550mm
• Length = 1120mm
• Weight = 1900 .. 2100g
• R / C functions = Rudder , elevator, ailerons, motor
• channels = 4/4 servos

This is the Multi- Adapter Balancing Board for  JST- XH (Gens ace, ALIGN, Optipower, and so..)
This adapter allows you to balance a 2S to 8S via one harness.

Great adapter when you have packs with different cell counts. Eliminates the need to purchase individual harnesses. works with most popular chargers / balancers only.
Plug only 1 battery in at a time during balancing

Equalizer adaptor for battery packs , fits Packs with 2 ... 6 cells

For connecting LiPo batteries fitted with Polyquest Balance adaptor leads to EH Equalizers( such as robbe)

HEXAGON LOCK  NUT M2 5PCS

LOCK NUT M3 10PCS

LOCK NUT M4 5PCS

Fits the OS /TT /Webra 60-105 motors: ALL versions.
1 PCS in package

Long nut YS MOTORS

1 pcs in package