Multicopter Tuning & Upgrades

Battery Protection Board with Tie Down Strap
Suitable for all fpv  Frame kit
Board size: 64x34mm
Tie Down Strap long: 200mm
Weight: 8.55g

Package Includes:
1 X Battery Protection Board
1 X Tie Down Strap

Replacement boom 23cm
Size: 230 x 15 x 15mm
Thickness: 0.6-0.7mm
Weight: 24.5g

Replacement boom 33cm
Size: 230 x 15 x 15mm
Thickness: 0.6-0.7mm
Weight: 24.5

Please check your local regulation before using this product!

Rush Tank Solo is a video transmitter designed primarily for freestyle and long-range copters. The video transmitter has a very nice design with an aluminum heat sink, which also helps protect components from mechanical damage and dirt. Video transmitter settings can be changed using two buttons or the Smart Audio protocol. Legal Power in EU is 25mw! The video transmitter excels in high maximum power, which with good cooling can reach values of up to 1.6W

Key Features

• Input voltage: 7-36V
• Output voltage: 5V @ 0.6A
• Power: 14dBm (25mW), 26dBm (400mW), 29dBm (800mW), 32dBm (1600mW)
• Protocol: Smart Audio 2.1
• Integrated microphone
• Antenna connector: MMCX
• Size: 37x23x6.7mm
• Weight: 12g
  
  Package Includes

• 1x RushFPV Tank SOLO
• 1x SMA pigtail
• 1x Linear antenna
• 1x Cable

Aluminium made Clamp, for 30mm tubes.

Allows simple installation and access to frame if disassembly needed- your Motor arms will not fall down.

the clamp is 40mm high.

Set of 1 clamp

Sky hero Spy/der Tuning Conversion Kit is a set of Clamps and Spacers, Allowing you many benefits from the building process till the maintenance.

New- Spacers now delivered are CNC made, lightweight 7075 Alu, silver anodized

What will you gain with this set?

• Lightweight concept structure, increase the robustness of the frame structure.
• Simple assembly, with this set- your motor arms will never fall down, even when you disasseble the main frame.
• Easy access and maintenance of the machine, when disassemble process is needed.
• Clamps will provide you much stronger support for heavy lift.
• ABS made spacers will provide you with higher place inside the frame, allow installation of more components, especially in Spy and Spyder version.
• Spacers are much stronger than originals. Holes will allow you easy wiring In and out where needed.
• Better cooling in certain weather conditions.
• Virtually unbreakable parts! tested in stress and crash test.

What is included?

- Based on the version of the machine, e.g Spy or Spyder 4/6  you will get complete set of CNC Spacers, and Clamps needed to replace your current parts.

• Spy :Set of 3 Spacers, 6 clamps, Hardware
• Spyder 4/8 :  Set of 5 Spacers, 8 clamps, Hardware
• Spyder 6 : Set of 6 Spacers, 12 clamps, Hardware

Hardware is included.

- Note- we recommend this kit for " Handy people" and assemblers of drones.
- You will need to drill some extra holes for the clamps.

Silicon Tube IP67 Flexible LED Strip 1 METER, 60leds/meter 5050 Waterproof LED
Choice of colors: Red, Yellow, Green, Blue, White
Easy to glue, flexible, weather Proof

Description:

•   Silicone tube encased waterproof IP67
•   5050 SMD LED as the light source
•   High Brightness, All single color
•   High luminance efficient and low power consumption
•   Easy Installation, 3M self adhesive tape in backside
•   The flexible LED strip can be divided by every three leds
•   Long Life over 50, 000 hours of usable life
•   CE RoHS compliant
•   With 2~3 Year Warranty

Specifications:

•   Dimension: 1 meter, 8mm wide
•   LED Chip:  5050 SMD TOP LED
•   LED Quantity: 60pcs/meter
•   Material: FPC + Silicone
•   Beam Angle: >120°
•   Working Voltage: DC11V - DC24V
•   Rated Power: 14.4W/m

Dome for Multicopters, can be used on almost any machine from 450 mm.

Tube is a very high quality carbon fibre tube made with Pullwinding production technology. The material of the tube in question is a mix of glassfibre, carbon fibre and epoxy.
The tube is light weight, strong and stiff and is well suited for demanding applications.
The outer diameter of the tube is 30 mm and inner diameter 27 mm. Length of the tube is 100 cm and the color is black.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Size:30mm out diameter 27mm inner diameter
•   Length: 1000mm
•   HYBRID Carbon Fiber
•   Quantity: 1pc

Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

please advise +- the size how you want them cut, example 50/50cm, 30-70...

Carbon Fiber 3k tube, size : 30 mm OD,28mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.

High strength roll wrapped carbon fibre tube with a glossy, woven carbon fibre finish making them a great choice for a huge range of both structural and cosmetic applications including drones, UAVs, camera rigs, automation, tripods, lightweight structures and much more.

Specifications:

•   Size:30mm out diameter 28mm inner diameter
•   Length: 1000mm
•   100% Carbon Fiber
•   Quantity: 1pc

Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

please advise +- the size how you want them cut, example 50/50cm, 30-70...

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those  Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Technology : 3K Matte Twill Matte
  
•   Size:15mm OD/ 13mm ID
•   Length: 1000mm
•   Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those  Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Technology : 3K Matte Twill Matte
  
•   Size:20mm OD/ 18mm ID
•   Length: 1000mm
•   Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

• Technology : 3K Matte Twill Matte
  
• Size:24mm OD/ 22mm ID
• Length: 1000mm
• Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

• Technology : 3K Matte Twill Matte
• Size:35mm OD/ 33mm ID
• Length: 1000mm
• Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

• Technology : 3K Matte Twill Matte
• Size:40mm OD/ 37mm ID
• Length: 1000mm
• Quantity: 1pc

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

•  Technology : 3K Matte Twill Matte
•  Size: 8mm OD / 6mm ID
•  Length: 1000mm
•  Quantity: 1pc

Colored Carbon fiber tube 30x28mm, 1000mm long, choice of White or Light Yellow color.

Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

Carbon Fiber 3k tube in White or Light Yellow color.
Size : 20 mm OD, 18mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

  Size:20mm out diameter 18mm inner diameter
  Length: 1000mm
  100% Carbon Fiber
  Quantity: 1pc

Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!please advise +- the size how you want them cut, example 50/50cm, 30-70...

Colored Carbon fiber tube 30x28mm, 1000mm long, Yellow color Or White, CHOOSE in options
Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

Carbon Fiber 3k tube in Color finish
Size : 30 mm OD,28mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Size:30mm out diameter 28mm inner diameter
•   Length: 1000mm
•   Quantity: 1pc
•   Color- Yellow- white- choose in options
  

Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to USB-C android devices when flying to view and transfer the real time video / images
The usb-c is to plug in the controller, and other side to android device.
The Cable outer is make of nylon braided protection, which is very dural and anti-pull.

90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
Its length is +-30cm, which is the perfect length for controller to cellphone / tablet

Connector: USB-C to USB-C (Android devices and others)
Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom

OTG cables allow you to connect your smartphone or tablet to your DJI remote, depending on the connection and the brand of your device.

Cable avaliable in following configuration: choose your model

• Micro USB to USB-C
• Micro USB to Apple (Lighning)
• Micro USB to Micro USB

For added convenience, the Thor cable is Heavy Duty and designed in a spiral shape to automatically adjust to the distance between your device and your  mount.

You can use this cable with a smartphone or tablet with a micro USB connection in combination with the following remote controllers:

•     DJI Mavic Pro
•     DJI Mavic Pro Platinum
•     DJI Phantom 3
•     DJI Phantom 4 / Pro / Pro V2
•     Inspire 1
•     Inspire 2
•     Matrice 210
•     Matrice 600
•     Mini
•     Spark

Also Other models which fit the connector and OTG

Cable length: 35cm (coiled), total length max 60cm

Set of 1 cable

Thor cables allow you to connect your smartphone or tablet to your DJI remote, depending on the connection and the brand of your device.

Cable avaliable in following configuration: choose your model

• USB-C to USB-C
• USB-C to Apple (Lighning)
• USB-C to Micro USB( not coiled- straight)

For added convenience, the Thor cable is Heavy Duty and designed in a spiral shape to automatically adjust to the distance between your device and your  mount.

You can use this cable with a smartphone or tablet with a micro USB connection in combination with the following remote controllers:

• DJI Air 2
• DJI Mavic Mini
• Mavic Pro
• Phantom series
• Inspire

Other models which fit the connector

Cable length: 35cm (coiled), total length max 60cm

Set of 1 cable

Electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that are designed to accept 10mm wire legs and is suitable for models with a maximum weight of 20kg.

These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.

Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.

Specifications:

• Leg Wire: 10mm
• Max Weight: 20Kg
• MountPlate: 43 x 51
• Stall Current: 2.1 to 3A
• Weight: 186g
• Voltage: 4.8 - 7.4v
• Dimensions: 92 x51 x 31
• Gear Type: Metal
• Torque: 15.50 kg/cm-4.8v
• Torque: 20.60 kg/cm-7.4v
• Speed: 6.00 secs-4.8v
• Speed: 4.00 secs-7.4v
• Type: Digital

This electric retract range is designed to keep retract installations simple and reliable with great value for money. The electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that have pre-installed 5mm diameter studs for use with oleo legs and is suitable for models with a maximum weight of 10kg.

These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.

Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.

Specifications:

Leg Wire: 5mm
Max Weight: 10Kg
MountPlate: 44 x 51
Stall Current: 2.1 to 3A
Weight: 92g
Voltage: 4.8 - 7.4v
Dimensions: 92 x51 x 31
Gear Type: metal
Torque: 15.50 kg/cm-4.8v
Torque: 20.60 kg/cm-7.4v
Speed: 6.00 secs-4.8v
Speed: 4.00 secs-7.0v
Type: digital

This electric retract range is designed to keep retract installations simple and reliable with great value for money. The electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly.

These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.

Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.

Specifications:

Leg Wire: 5mm
Max Weight of model 6kg
Mount Plate: 74x44x28 mm
Stall Current: 2.1 to 3A
Weight: 69g each side
Voltage: 5-6v
Gear Type: metal

This electric retract range is designed to keep retract installations simple and reliable with great value for money. The electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly.

Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

this model is de mounted from model, its brand new.

Fit motors up to 37mm in diameter.

Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

• 2 Half Arms, Made from CNC aluminum,
• Screws

Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to iPhone / iPad when flying to view and transfer the real time video / images
The usb-c is to plug in the controller, and the lighning end is used with iPhone /Tablet, it support IOS 7,8,9,10, fit for iPhone X / 8 / 7 / 7/ 6 / 5 / SE, iPad / iPad Air / iPad Mini and etc
The Cable outer is make of nylon braided protection, which is very dural and anti-pull.

90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
Its length is +-30cm, which is the perfect length for controller to cellphone / tablet

Connector: Micro USB to Lightning ( for iPhone / iPad )
Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom

Silent block 8x8 mm with tread M3x10mm set of 4 pcs

Small and compact Vibration dampener set for M3 threads.
Suitable for installation of modules e. g.  Fuel tanks, Autopilot, camera gimbals, and any dampening vibrations needed modules.
The vibration dampeners ensure good cooling space and vibration-free mounting.

Specification:

• Overall Size: L28mm x 3mm
• Thread: M3
• Diameter: 8mm
• Color: Black
• Rubber is 60D

see drawing for all details

Silentblock M4x15mm set (4 pcs)

Vibration dampener set for M4 threads.
Suitable for installation of modules e. g. current supplies inside the model.
The vibration dampeners ensure good cooling and vibration-free mounting.

Specification:

• Overall Size Height-15mm
• Thread: M4 male and female( hole)
• Diameter:15mm
• Color: Black
• Produced in Germany
  

CNC XT60 Aluminum housing holder

Machined from High-Quality Aluminum bar stock, it is designed to fit on a 4mm motor shaft, and has a 6mm threaded prop shaft.

Machined from High-Quality Aluminum bar stock, it is designed to fit on a 5mm motor shaft, and has a 8mm threaded prop shaft.