Mikado

Mikado Torque tube 10x743mm, LOGO 700

Mikado Torque tube, full set, LOGO 700

Mikado Tray for VBar Control, black without radio.

Mikado Tray for VBar Control, blue-transparent without radio.

Mikado Tray for VBar Control, neon-yellow without radio.

Mikado Tray for VBar Control, white without radio.

Mikado Tray for VBar Control, white-transparent without radio.

This is an upgraded Carbon-Aluminum Drive pulley LOGO , this pulley is more precise CNC part, excellent Upgrade for Logo helicopters

can be used on LOGO 500 / LOGO 550 SE / LOGO 500 SE (2009-2012) / LOGO 550 SX / LOGO 600 / LOGO 600 SE / LOGO 600 SE (2010-2013) / LOGO 600 SX / LOGO 480 XXTREME

Set of 1 pulley

Mikado Upper main rotor shaft support, LOGO 700

Mikado Upper sideframe left, LOGO 700

Mikado Upper sideframe right, LOGO 700

Mikado VBar Control Battery ID Sensor

Benefits at a glance:

• Automatic detection of flight pack batteries in a model.
• Battery logbook stored in the radio automatically.
• Simplified battery management.

Required accessories:
VBar Control radio 04841 or set 04842, 04843 with VBar Control RX-Satellite and VBar with Spektrum-Satellite-Connectors (Telemetry-Bus).
Current/Voltage/Capacity Sensor 04890.
Battery ID Tags 04908 (10-pcs. each; 5 pcs. included with each sensor).

Consumer benefits:
Less risk of damaging batteries by deep discharge when using flight packs with different capacities or of different age.
Automatically creates and stores logbooks in VBar Control for all flight packs that have already been entered,
which can be analyzed on a computer later on.
Automatic selection of known batteries in VBar Control, independently from the selected model: plug & fly.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screendesign directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacities 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hot spot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High performance low power controller for best user experience and long runtime.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Preorder- delivery scheduled on January 2023 : The 200 eur is a Deposit, we will contact you to pay the rest before shipment. the cost of the radio is 1346 eur

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on vstabi web, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screendesign directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Delivery including:

- VBar Control Touch (formerly known as 05130)
- VBar NEO VLink 04949

Mikado VBar EVO Aluminium-case VLink 6.x Black color

The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

Pro configuration contains extended parameter access.

With VBar Control, Pro also provides access to Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models.

Pro implicitely includes the VPlane firmware license for fixed wing models, which can be used with VBar Control exclusively.

The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.