Mikado
Mikado Nitro GLOGO 690SX helicopter kit with blades
This model has been designed and thoroughly tested by our Team Pilot Kyle Dahl, he has even flown it in competition already. The prototype took a respectable 5th place at this year‘s Global 3D, in a field dominated by top pilots with very powerful and capable electric models. Compared to other nitro helicopters of it‘s size, it is very light (from 4,100-4,350 g / 9.04-9.59 lb dry), which results in very good flight peformance for the given type of drive. The GLOGO 690 comes with a sleek and aerodynamic canopy which fits nicely between our electric helicopters, but has sufficient personality of it‘s own. The GLOGO 690 will not be offered as a conversion kit. Engines between 91 and 120 cu. in. can be used, together with a compatible muffler. Both has to be purchased separately. Mikado hasn’t had a model for the nitro market in 26 years, but the ultra light GLOGO 690 is the model worthy to bring NITRO back to MIKADO! THE benefits at a glance: Due to the plastic rotor blade grips, belt drive, and super light tail box, it makes the GLOGO 690 one of the (if not the actual) lightest Nitro model on the market. Because of the light belt drive and ultra light tail box, we did not have to use a larger main gear, or front mounted servos with bell cranks in order to attain proper CG. As a result of the small main gear, and direct control servos, we were able to make a very small and aerodynamic canopy which provides ultimate performance and looks for the model. Utilizes the Synergy XL Spec Clutch which provides no slip engagement even at very low main rotor RPM. One piece carbon side plates provide a stronger frame around the clutch stack area. Clutch stack is mounted using 8 x M3 bolts, providing very strong and perfect alignment. Designated wiring routes with frame grommets and zip tie slots, to take wires from the front of the model towards the rear. Large front battery tray allows space for the use of large RX batteries so you can fly all day without charging! Boom supports mounted with threaded rod and nuts, which allows you to service them without dismounting the muffler. Plenty of mounting places for auxiliary equipment such as remote glow drivers, back up guards, etc. The proven rotor head design has been in use on the LOGO 690 for nearly four years now. It is lightweight, and perfectly functional for this nitro model application. Recommended main rotor blade sizes are 650-700 mm, depending on your personal taste and style of flying. To power the GLOGO, you can use any nitro engine between the size of 91-120. In our testing we used OS91, YS96, and OS105 engines. In the beginning, there will be one gear ratio available: 8.15 with a 13 tooth pinion. In the future we may offer a 14 tooth pinion which will give a gear ratio of 7.57 for use with smaller 650 blades and higher RPM. The newly designed canopy of the GLOGO 690 combines the known and appealing design and visibility with fantastic aerodynamics: this helps especially with swift transitions within or between 3D maneuvers and big air aerobatics. Colored tail fins also help with visibility. Proudly partnered with Synergy Model Helicopters, to utilize their proven Fuel Tank, Fan, and Fan shroud, along with the Synergy XL Spec Clutch. With off-the-shelf components, an all up weight of 4.1-4.35 kg (no fuel) is possible, depending on your component choices.
It utilizes tried and tested components from the existing LOGO 690 such as:
Specifications:
Content :
Accessories:
|
€1150.00
€950.41 Ex VAT
Mikado original Swashplate set for LOGO 700 & 800 XXtreme
Mikado original Swashplate set for LOGO 700 & 800 XXtreme |
€99.00
€81.82 Ex VAT
Mikado Protection Case for NEO Aluminum case, black color #05270
Mikado Protection Case for NEO Aluminum case, black color #05270 For devices of the 2nd Generation (V2) only. |
€34.90
€28.84 Ex VAT
Mikado Protection Case for NEO Aluminum case, Silver color #05549
Mikado Protection Case for NEO Aluminum case, Silver color #05549 For devices of the 2nd Generation (V2) only. |
€34.90
€28.84 Ex VAT
Mikado Protection Case for VBar EVO, blue #05558
Case for VBar NEO For the 2nd hardware generation |
€13.50
€11.16 Ex VAT
Mikado Radio Case Carbon Look, VBar Control
Mikado Radio Case Carbon Look, VBar Control
Item contents:
|
€69.00
€57.02 Ex VAT
Mikado Radio Case Faux Leather, Fits VBar Control
Mikado Transport Radio Case Faux Leather, Fits VBar Control |
€79.99
€66.11 Ex VAT
Mikado Radio Case XL, silver, VBar Control
Mikado Radio Case XL, silver, VBar Control
Item contents:
|
€68.00
€56.20 Ex VAT
Mikado Radius arm swashplate driver LOGO XXTreme 700 & 800 #04509
Radius arm swashplate driver, LOGO XXTreme 700 & 800 |
€6.90
€5.70 Ex VAT
Mikado Rotor Head / Counterbearing Upgrade-Combo, LOGO 500 SE/SX
Mikado Rotor head / counterbearing upgrade-combo, LOGO 500 SE/SX This upgrade set contains:
|
€99.00
€81.82 Ex VAT
Mikado Rubber Grip Set Black, VControl
Description: Mikado Rubber Grip Set Black, VControl
|
€39.00
€32.23 Ex VAT
Mikado Rubber sorround for GLOGO 690 fuel tank
Mikado Rubber sorround for GLOGO 690 fuel tank |
€8.99
€7.43 Ex VAT
Mikado Scorpion Motor Combo LOGO 550 SX Helicopter Kit
Mikado Scorpion motor combo LOGO 550 SX Helicopter kit New 2015 Model The LOGO 550 SX is the first member of the next evolutionary step of our popular and proven LOGO 500/550/600 helicopter series. Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500/550/600 size LOGO helicopters.
Specifications Helicopter:
Content:
|
€679.00
€561.16 Ex VAT
Mikado Servo mounting plates 10+11mm, LOGO 700
Mikado Servo mounting plates 10+11mm, LOGO 700 |
€16.90
€13.97 Ex VAT
Mikado Sideframe stiffener right/left, LOGO 550
Mikado Sideframe stiffener right/left, LOGO 550 |
€29.90
€24.71 Ex VAT
Mikado Sideframe V2, LOGO 550/600/690, left
Mikado Sideframe V2, LOGO 550/600/690, left |
€33.90
€28.02 Ex VAT
Mikado Sideframe V2, LOGO 550/600/690, right
Mikado Sideframe V2, LOGO 550/600/690, right |
€33.90
€28.02 Ex VAT
Mikado Socket Head Cap Screw Set M4x25 (2 pcs) #02079
Socket head cap screw set M4x25 (2pcs) |
€5.20
€4.30 Ex VAT
Mikado Swashplate driver lever LOGO XXTreme 700 & 800 #04508
Swashplate driver lever, LOGO XXTreme 700 & 800 |
€29.00
€23.97 Ex VAT
Mikado Swashplate guide/ canopy mounting, LOGO 700
Mikado Swashplate guide/ canopy mounting, LOGO 700 |
€15.50
€12.81 Ex VAT
Mikado Swashplate Y-link LOGO 10/16/20/400/SE/600/SE #00981
Y-link LOGO 10/16/20/400/SE/600/SE |
€4.90
€4.05 Ex VAT
Mikado Tail boom distance spacer, LOGO 700
Mikado Tail boom distance spacer, LOGO 700 |
€12.90
€10.66 Ex VAT
Mikado Tail rotor blade holder set for LOGO XXtreme 700 & 800 #04583
Tail rotor blade holder, LOGO XXtreme 700 & 800 |
€11.90
€9.83 Ex VAT
Mikado Tail Rotor Blade Holders, Set of 2 #02462
Mikado Tail Rotor Blade Holders, Set of 2 |
€8.90
€7.36 Ex VAT
Mikado Tail Rotor Control Sleeve Assembly LOGO 500-600 #04235
Tail rotor control sleeve assemby LOGO 500- 600 |
€22.00
€18.18 Ex VAT
Mikado Tail rotor hub with thrust bearings (full-set) #04615
Mikado Tail rotor hub with thrust bearings (full-set) #04615 |
€31.30
€25.87 Ex VAT
Mikado Tail rotor shaft with bevel gear, LOGO 700
Mikado Tail rotor shaft with bevel gear, LOGO 700 |
€13.50
€11.16 Ex VAT
Mikado Tail Rotor Spacer Set Logo 600SX- 600SE #4107
This is a replacement Mikado Tail Rotor Spacer Set, suited for use with the Logo 600SX & Logo 600SE helicopters. |
€4.50
€3.72 Ex VAT
Mikado Temperature Sensor (- 300°C) VBar Control #05058
Mikado Temperature Sensor (- 300°C) VBar Control #05058 |
€33.90
€28.02 Ex VAT