Mikado

Mikado GLOGO 690 SX Sideframe Front Support

Mikado GLOGO 690 SX Start Couple

Mikado GLOGO 690 SX Start Coupler

Mikado GLOGO 690 SX Tail Boom Mount

Mikado GLOGO 690 SX Tail control sleeve

Mikado GLOGO 690 SX Tail Pulley Mount

Mikado GLOGO 690 SX Vertical Frame Plate

Mikado GLOGO 690 Tail Brace Mounting

The new VBar gyro sensor is downward compatible with all existing main units (except for VBar with aluminium case sensor).

The New VBar Silverline uses a new sensortechnology, which uses three sensorelements that are the only ones on the market specially designed and adapted for the use in real model helicopters.

The Sensors are manufactured by the Company Silicon Sensings and use a oszillating ring structure for the detection of rates in opposite to the known sensors that have only one or two oszillating masses.

The symmetric design and 8 separate sensing devices inside the sensor give a perfect ballance of the system, which enables to detect smallest rotational movements even in high vibration environments. This gives us the advantage to mount the sensor very stiff at the frame, so it detects smallest movements very quick without getting disturbed by the vibrations.

Every heli produces lots of vibrations if it is rotates quickly around the axes. This is fairly normal but can create a certain drift in the other sensor elements which gives a slight cross coupling through the axes. The new sensor gives advantages not only in nitros or tubine helis, but on dynamicly moved 3D helis as well!

 

Double-side pressure-sensitive, suitable for mounting equipment quickly, simply and vibration-damping.

Dimensions (LxBxH): 100x50x2 mm

Mikado Helicopter Clamps for carbon tailrotor case 20mm.

Set of 2.

Use for LOGO 500 SE (2009-2012) / Logo 500/ Logo 400SE / Logo 400

Mikado Helicopter Driven belt 730 XL #4081

Mikado Helicopters Autorotation hub LOGO 500/550/600 #MIK-4067

Support for horizontal fin (tailboom dia. 25.0)

Lever for swashplate driver

LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.

Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

Main Highlights:

• Accepting up to 660 mm main blades
• 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
• Light und durable chassis fiberglass reinforced frame with battery quick release system
• Direct servo link to the swashplate
• Hollow main shaft with 10mm diameter
• Herringbone main gear with 153 teeth (module 0.7)
• Motor counterbearing with additional main shaft support
• Colored fin set in neon red, matched with the canopy
• Extra-strong 22 mm diameter tail boom
• Detailed airbrush canopy in neon yellow

Specifications Helicopter

• Rotor diameter:1340 mm
• Rotor blades:600 mm
• RTF weight :3,20 kg
• Battery :6S Lipo 5,000 mAh
• Main gear ratio :8.1-12.75
• Main Gear size:153 teeth modul 07
• Battery Slot:60 x 54 x 600 mm
• Length:1140 mm
• Hight:360 mm
• Width:210 mm

Content

• Kit Combo with blades
• Counterbearing with mainshaft support
• Detailed printed manual
• Blades  Carbon 610 mm
• Tail Blades Carbon 95 mm
• Airbrush painted canopy

LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.

Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

Main Highlights:

• Accepting up to 660 mm main blades
• 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
• Light und durable chassis fiberglass reinforced frame with battery quick release system
• Direct servo link to the swashplate
• Hollow main shaft with 10mm diameter
• Herringbone main gear with 153 teeth (module 0.7)
• Motor counterbearing with additional main shaft support
• Colored fin set in neon red, matched with the canopy
• Extra-strong 22 mm diameter tail boom
• Detailed airbrush canopy in neon yellow

Specifications Helicopter

• Rotor diameter:1340 mm
• Rotor blades:600 mm
• RTF weight :3,20 kg
• Battery :6S Lipo 5,000 mAh
• Main gear ratio :8.1-12.75
• Main Gear size:153 teeth modul 07
• Battery Slot:60 x 54 x 600 mm
• Length:1140 mm
• Hight:360 mm
• Width:210 mm

Content

• Kit Combo with blades
• Counterbearing with mainshaft support
• Scorpion HK III 4025-1100 kV, Mikado Edition
• Motor pinion :13 teeth modul 07
• Detailed printed manual
• Blades  Carbon 610 mm
• Tail Blades Carbon 95 mm
• Airbrush painted canopy

LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

Main Highlights:

• Accepting up to 660 mm main blades
• 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
• Light und durable chassis fiberglass reinforced frame with battery quick release system
• Direct servo link to the swashplate
• Hollow main shaft with 10mm diameter
• Herringbone main gear with 153 teeth (module 0.7)
• Motor counterbearing with additional main shaft support
• Colored fin set in neon red, matched with the canopy
• Extra-strong 22 mm diameter tail boom
• Detailed airbrush canopy in neon yellow

Specifications Helicopter

• Rotor diameter:1340 mm
• Rotor blades:600 mm
• RTF weight :3,20 kg
• Battery :6S Lipo 5,000 mAh
• Main gear ratio :8.1-12.75
• Main Gear size:153 teeth modul 07
• Battery Slot:60 x 54 x 600 mm
• Length:1140 mm
• Hight:360 mm
• Width:210 mm

Content

LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

Main Highlights:

• Accepting up to 660 mm main blades
• 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
• Light und durable chassis fiberglass reinforced frame with battery quick release system
• Direct servo link to the swashplate
• Hollow main shaft with 10mm diameter
• Herringbone main gear with 153 teeth (module 0.7)
• Motor counterbearing with additional main shaft support
• Colored fin set in neon red, matched with the canopy
• Extra-strong 22 mm diameter tail boom
• Detailed airbrush canopy in neon yellow

Specifications Helicopter

• Rotor diameter:1340 mm
• Rotor blades:600 mm
• RTF weight :3,20 kg
• Battery :6S Lipo 5,000 mAh
• Main gear ratio :8.1-12.75
• Main Gear size:153 teeth modul 07
• Battery Slot:60 x 54 x 600 mm
• Length:1140 mm
• Hight:360 mm
• Width:210 mm

Content

LOGO 550 SX is the next step in the LOGO 500 Series. The LOGO 550 SX keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SX and 550 SX size LOGO helicopters.

Main Highlights:

• Accepting up to 660 mm main blades
• 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
• Light und durable chassis fiberglass reinforced frame with battery quick release system
• Direct servo link to the swashplate
• Hollow main shaft with 10mm diameter
• Herringbone main gear with 153 teeth (module 0.7)
• Motor counterbearing with additional main shaft support
• Colored fin set in neon red, matched with the canopy
• Extra-strong 22 mm diameter tail boom
• Detailed airbrush canopy in neon yellow

Specifications Helicopter

• Rotor diameter:1340 mm
• Rotor blades:600 mm
• RTF weight :3,20 kg
• Battery :6S Lipo 5,000 mAh
• Main gear ratio :8.1-12.75
• Main Gear size:153 teeth modul 07
• Battery Slot:60 x 54 x 600 mm
• Length:1140 mm
• Hight:360 mm
• Width:210 mm

Content

The LOGO 600 SE is a special version of the LOGO 600 series with a longer tail boom. This allows using longer main rotor blades of about 690 mm in length.

With the considerably larger rotor disc and nearly the same all-in-weight, the LOGO 600 SE is a very lightweight heli in the 690 class.

The revised version has the counterbearing linked to the main rotor shaft and the one-piece head yoke oft he 600 SX series as well as a freshly designed canopy.

Below the canopy, you find the battery quick release system and considerably more headroom for flight packs below the counter bearing.

Highlights

• Very high flight performance for low RPM and 3D flying
• 690 mm rotorblades
• 10S Lipo (4,000-5,000mAh), 12S Lipo (max. 4,000 mAh)
• new one-piece metal rotorhead yoke with 8mm spindle shaft and extra-large thrust bearings
• light und durable fiberglass reinforced frame with battery quick release system
• hollow 10 mm main shaft
• new and stronger modul 1 herringbone main gear
• new counter bearing with main shaft support
• new fin set in neon-yellow color
• 25 mm tail boom
• Airbrush canopy

Specifications Helicopter

• Rotor diameter:1550 mm
• Rotor blades:up to 693 mm
• RTF weight: 4,0 kg
• Battery:10S LiPo (4,500 mAh) or 12S Lipo (max. 4,000mAh)
• Main gear ratio:7.1 - 10.6
• Main Gear size:106 teeth modul 1
• Battery slot:60 x 54 x 300 mm (HxBxL)
• Kit Length:1310 mm
• Kit Hight:360 mm
• Kit Width:210 mm

Content

• Kit with VBar Rotor Head
• Motor counterbearing with mainshaft support
• Detailed printed manual
• Blades CFK 690 mm
• Tail Blades CFK 105 mm
• Airbrushed Canopy

The LOGO 600 SE is a special version of the LOGO 600 series with a longer tail boom. This allows using longer main rotor blades of about 690 mm in length. With the considerably larger rotor disc and nearly the same all-in-weight, the LOGO 600 SE is a very lightweight heli in the 690 class. The revised version has the counterbearing linked to the main rotor shaft and the one-piece head yoke oft he 600 SX series as well as a freshly designed canopy. Below the canopy, you find the battery quick release system and considerably more headroom for flight packs below the counter bearing.  

• Very high flight performance for low RPM and 3D flying
• 690 mm rotorblades
• 10S Lipo (4,000-5,000mAh), 12S Lipo (max. 4,000 mAh)
• new one-piece metal rotorhead yoke with 8mm spindle shaft and extra-large thrust bearings
• light und durable fiberglass reinforced frame with battery quick release system
• hollow 10 mm main shaft
• new and stronger modul 1 herringbone main gear
• new counter bearing with main shaft support
• new fin set in neon-yellow color
• 25 mm tail boom
• Airbrush canopy

Specifications Helicopter:

• Rotor diameter     1550 mm
• Rotor blades     693 mm
• RTF weight     ca. 4,0 kg
• recommended batterie     12S Lipo (max. 4,000mAh)
• Main gear ratio     7.1 - 10.6
• Main Gear size     106 teeth modul 1
• batterie slot     60 x 54 x 300 mm (HxBxL)
• Length     1310 mm
• Hight     360 mm
• Width     210 mm

Content:

• Kit     Kit with VBar Rotor Head
• Accessories     Motor counterbearing with mainshaft support
• Manual     detailed printed manual
• Motors     Scorpion HKII 4035-450
• Motor pinion     11 teeth
• Blades     CFK 690 mm
• Tail Blades     CFK 105 mm
• Canopy     Airbrushed Canopy

Dimensions:

• W x H x D - 385x320x135mm
• Weight - 1.6 kg / 3.53 lb

Contents:

• Item(s) - Transport case with pre-cut foam lining

Miscellaneous:

• Material - Aluminum, plastic

 

Stainless steel socket wrench for the finishing caps of all switches

T6 socket wrench for all T6 Torx bolts in VBar Control

Spare plungers for fine-adjustment of the power button

Mikado Hex screw M2,5x25 10PCS #5033

Mikado Hex Screw M2,5x27

Mikado Hex screw M3x30, LOGO 700

Mikado Holder for torque tube, with ball bearing, LOGO 700

Mikado Horizontal fin with clamps, LOGO 700

Compatible with Logo 550 SE Tail boom

Mikado Linkage set swashplate, LOGO 700

Rotorhead LOGO 550 SX, comes as Kit, Head is up to swashplate.

Not including swashplate.

Mikado Flight Trainer helps r/c heli beginners with learning to fly. Different modes support different stages. „Guided“ Mode is the first one. The heli is guided by the system, and the pilot can safely-with much fun and little stress-get accustomed to the controls of the model, and to the view of the model in flight, no matter if tail in, sideways, nose in, and how the controls react in different orientations. The model will stop automatically when the sticks are released. No prior experience required.

In „Smart-border“ Mode, some more piloting skills are required. Here, you have a safe flight zone. The model will react more gently, but already in the same way as a free flying model helicopter. When coming close to the ground, or when reaching the upper limit of the flight zone, collective pitch will be controlled in a way so exiting the flight zone is not possible. When reaching the lateral limits of the flight zone, the model will stop, and it will return into a hovering position above it’s base automatically.

After mastering this, there’s „Free Flight“ Mode. Here, the model is reacting like a full-bred 3D helicopter. In this mode, there is still a limitation to 90° bank angle, and the flight zone is still there. This means, even now, the model can not crash. At all borders, the model will upright, slow down, and return into a hovering position above it’s base automatically.

This mode is good for more experienced beginners, too, e.g. for learning to fly nose-in, or to practice other still uncomfortable orientations.

One you feel safe controlling your LOGO 200 inside the flight zone, you can disable Trainer mode, and push your LOGO 200 through the whole 3D program. If required, Trainer mode can still take over takeoff and landing, e.g. if you want or need to land in a confined area.

The flight zone can be adjusted from 3 to 20 m (approx. 10 to 65 ft) and from 1 to 10 m altitude (approx. 3 to 33 ft). At the lower border, there’s a technical limit as well as a 1 m (3 ft) safetey zone. Close to the base, you can fly down to approx. 30 cm / 1 ft.

In all modes, the model will take off and land automatically. Of course, if you disable Trainer mode manually, you have to land manually. In all trainer modes, the model will also land automatically when the battery is empty

Specifications Helicopter
Rotor diameter 400 mm
Rotor blades VTX 173
RTF weight approx. 350 g / 12,35 oz
recommended batteries 650-700 mAh (1 pc. 650 mAh included)
Main gear ratio 1:1 direct drive
Tail gear ratio Motor driven tail (direct drive)

Content
Kit LOGO 200 Flight Trainer Edition
Accessories Flight Trainer Landing Pad, rubber for skids, boot plug, charging cable for flight packs XT30
Manual Printed manuals included
Motors included/mounted
ESC included/mounted
Radio VBar Control Basic Flight Trainer Edition
Radio Accessories Lanyard, charging cable USB C
VBar electronic VBar NEO mini Flight Trainer Edition
Servos 3 pc. mounted
Blades 1 set mounted
Tail Blades 1 pc. mounted
Canopy 1 pc. mounted
Accessories
Battery Charger Battery charger with balancer connector for 3s LiPo batteries (not included)

Mikado Flight Trainer helps r/c heli beginners with learning to fly. Different modes support different stages. „Guided“ Mode is the first one. The heli is guided by the system, and the pilot can safely-with much fun and little stress-get accustomed to the controls of the model, and to the view of the model in flight, no matter if tail in, sideways, nose in, and how the controls react in different orientations. The model will stop automatically when the sticks are released. No prior experience required.

In „Smart-border“ Mode, some more piloting skills are required. Here, you have a safe flight zone. The model will react more gently, but already in the same way as a free flying model helicopter. When coming close to the ground, or when reaching the upper limit of the flight zone, collective pitch will be controlled in a way so exiting the flight zone is not possible. When reaching the lateral limits of the flight zone, the model will stop, and it will return into a hovering position above it’s base automatically.

After mastering this, there’s „Free Flight“ Mode. Here, the model is reacting like a full-bred 3D helicopter. In this mode, there is still a limitation to 90° bank angle, and the flight zone is still there. This means, even now, the model can not crash. At all borders, the model will upright, slow down, and return into a hovering position above it’s base automatically.

This mode is good for more experienced beginners, too, e.g. for learning to fly nose-in, or to practice other still uncomfortable orientations.

One you feel safe controlling your LOGO 200 inside the flight zone, you can disable Trainer mode, and push your LOGO 200 through the whole 3D program. If required, Trainer mode can still take over takeoff and landing, e.g. if you want or need to land in a confined area.

The flight zone can be adjusted from 3 to 20 m (approx. 10 to 65 ft) and from 1 to 10 m altitude (approx. 3 to 33 ft). At the lower border, there’s a technical limit as well as a 1 m (3 ft) safetey zone. Close to the base, you can fly down to approx. 30 cm / 1 ft.

In all modes, the model will take off and land automatically. Of course, if you disable Trainer mode manually, you have to land manually. In all trainer modes, the model will also land automatically when the battery is empty

Specifications Helicopter
Rotor diameter 400 mm
Rotor blades VTX 173
RTF weight approx. 350 g / 12,35 oz
recommended batteries 650-700 mAh (1 pc. 650 mAh included)
Main gear ratio 1:1 direct drive
Tail gear ratio Motor driven tail (direct drive)

Content
Kit : LOGO 200 Flight Trainer Edition
Accessories : light Trainer Landing Pad, carrying bag for your Flight Trainer and accessories, rubbers for skids, boot plug, charging cable for flight packs XT30
Manual Printed manuals included
Motors included/mounted
ESC included/mounted
Radio VBar Control Basic Flight Trainer Edition
Radio Accessories Lanyard, charging cable USB C
VBar electronic VBar NEO mini Flight Trainer Edition
Servos 3 pc. mounted
Blades 1 set mounted
Tail Blades 1 pc. mounted
Canopy 1 pc. mounted

Accessories
Battery Charger Battery charger with balancer connector for 3s LiPo batteries (not included)

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly) with premium case combo

• The LOGO 200 comes in a nice case with black faux leather (45x38x15).
• The case offers space for a VBar Control radio, 5 pc. batteries, charger, tools and spare parts
• Exceptional flight performance, comparable to larger 600-700 class helis
• Equally suitable for sports flying, aerobatics and 3D flying
• Wide range of head speeds, from 2,500-7000+ 1/min possible
• Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
• Dual Motor System, direct drive for main and tail rotor
• Dual ESC with metal case
• VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
• VBar NEO already set up, no setup on your own required, just bind and fly
• VBar NEO Governor with RPM telemetry
• Micro digital servos with metal gears for the swashplate
• Carbon frame and landing gear
• Aluminum rotor head and swashplate
• VTX main rotor blades
• Glass Fiber Airbrush canopy

This LOGO 200 does not support other radio systems than VBar Control, without further adjustments.

At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.

You then obviously also need a suitable separate third party receiver. Parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.

If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).

Specifications Helicopter

• Rotor diameter     400 mm
• Rotor blades     VTX 173 mm
• RTF weight     approx. 310 g
• recommended batterie     Lipo 3S-650 mAh (included)
• Main gear ratio     1
• Tail gear ratio     1
• Main Gear size     /
• Length     420 mm
• Hight     135 mm
• Width     74 mm

Content

• LOGO 200 Super Combo ARF
• Mikado carry Case
• Motors  OMPHOBBY
• ESC OMPHOBBY
• VBar NEO mini VLink 6.4
• Servos 3 x digital micro servo w/ metal gears
• Blades  VTX 173 mm
• Tail Blades 71 mm
• Canopy Airbrush canopy

The Logo 200 from Mikado Helicopters is a unique spin on the latest demand for BNF Micro helicopters. Paired with a VBar Mini Neo gyro system, users with VBar Control radio systems will be greeted with a Bind-N-Fly package that flies like a larger helicopter thanks to some special software implementation with the Vbar Mini Neo release.

The LOGO 200 does not support other radio systems than VBar Control. Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.

•     BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
•     Exceptional flight performance, comparable to larger 600-700 class helis
•     Equally suitable for sports flying, aerobatics and 3D flying
•     Wide range of head speeds, from 2,500-7000+ 1/min possible
•     Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
•     Dual Motor System, direct drive for main and tail rotor
•     Dual ESC with metal case
•     VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
•     VBar NEO already set up, no setup on your own required, just bind and fly
•     VBar NEO Governor with RPM telemetry
•     Micro digital servos with metal gears for the swashplate
•     Carbon frame and landing gear
•     Aluminum rotor head and swashplate
•     VTX main rotor blades
•     Glass Fiber Airbrush canopy

At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.

You then obviously also need a suitable separate third party receiver.

Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.

If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).