Mikado

Mikado Chassis Upgrade set LOGO 500/550

Updates existing LOGO 600 models to the current level of development.

New benefits:

• Battery quick release system
• Strengthened front to take wider battery packs (frames may be cut out accordingly)

Mikado Comfort Set VBar Control, black

The new standing feet in soft rubber quality give the VBar Control a perfect stability and protect the case against scratches.
With the additional carrying handle the VBar Control feels much better in your hands.

Mikado Comfort Set VBar Control, black/yellow

The new standing feet in soft rubber quality give the VBar Control a perfect stability and protect the case against scratches.
With the additional carrying handle the VBar Control feels much better in your hands.

Mikado Control sleeve for tail rotor shaft #02455

Mikado Coupling for torque tube, LOGO 700

Hardware Features of the Current/Voltage/Capacity Sensor for flight packs

• Plug & play version with XT30 connectors and sensor wire, perfect fit for LOGO 200
• No influence from motor or current carrying wires
• Sensor wire attached

Software Features

• Direct displaying from voltage and capacity
• Max. current and min. voltage storage
• Log file data from the flight
• Battery Logbook with names
• Adjustable capacity, residual capacity and voltage for each battery
• Residual capacity is shown as bar in the radio display
• Over discharge Warning
• Warning at use of not fully charged batteries
• Loud speaker announcement for reducing battery capacity

Notes

• Requires a VBar with Spektrum Satellite connectors (telemetry bus for VBar Control)
• extracted capacities are not added up, measurement only on a per-flight basis

Mikado Current/Voltage/Capacitysensor for VBar Control

Hardware Features of the Current/Voltage/Capacity Sensor for flight packs:

• Individually precision calibrated
• Optocoupler
• Reverse battery protection
• No influence from motor or current carrying wires

Software Features:

• Direct displaying from voltage and capacity
• Max. current and min. voltage storage
• Logfile data from the flight
• Battery Logbook with names
• Adjustable capacity, residual capacity and voltage for each battery
• Residual capacity is shown as bar in the radio display
• Overdischarge Warning
• Warning at use of not fully charged batteries
• Loud speaker announcement for reducing battery capacity

Notes:
Requires a VBar with Spektrum Satellite connectors (telemetry bus for VBar Control)
Not suitable for measuring receiver packs only (e.g. on a nitro heli)
extracted capacities are not added up, measurement only on a per-flight basis

Specifications:

• Current Consumption     2.5 mA
• Working Temperature Range     -5 to 50 °C, 23 to 122 °F
• Dimensions     approx. 20 x 20 x 10 mm
• Power Rating     120 A continuous, 330 A peak
• Effective Range (current)     0.1 A to 300 A
• Effective Range (voltage)     5 V to 100 V (2s to 16s LiPo)
• Resolution     0.01 A / 0.01 V

Contents:
Device   Voltage/Current Sensor with connecting wires to battery and ESC
Connecting Wire     Sensor wire 500 mm

Accessories:

• Connecting Wire 250 mm     04898
• Connecting Wire 500 mm     04899
• Battery ID Reader     04907
• Battery ID Tags (10 pc.) 04908
• Miscellaneous

Mikado Distance bushing bevel/teeth gear, LOGO 700

Mikado Distance washer blade holder, LOGO 700

Compatible with Logo 550 SE tail rotor case

Mikado Front canopy support, LOGO 700

Fun-Key/Rotortech CFK-Rotorblade Ultimate 580mm

Gens ace G-Tech 700mAh 11.1V 60C 3S1P Lipo Battery Pack comes with strong body and very reasonable price. This battery is also very easy to balance. It’s the high quality and reliable power you need.

Spec:

- Capacity: 700mAh
- Voltage: 11.1V/3S
- Discharge Rate: 60C
- Weight: 55g
- Size: 58*22.5*23mm

Usage:

Gens ace G-Tech 700mAh 11.1V 60C battery is suitable for the following models: OMPHOBBY M2 RC Helicopter and Mikado LOGO200.

Mikado GLOGO 690 61mm Standoff #5247

Mikado GLOGO 690 SX 3rd Bearing Block

Mikado GLOGO 690 SX Bearing Anti Rotation Mount

Mikado GLOGO 690 SX Bearing Block Support Plate

Mikado GLOGO 690 SX Canopy Holder

Mikado GLOGO 690 SX Canopy neon-orange/blue

Mikado GLOGO 690 SX Canopy neon-yellow/blue

Mikado GLOGO 690 SX Chassis Bottom Plate

Mikado GLOGO 690 SX Clutch bell

Mikado GLOGO 690 SX Clutch Stack

Mikado GLOGO 690 SX Clutch Stack Top

Mikado GLOGO 690 SX Cooling Fan

Mikado GLOGO 690 SX Fan mount

Mikado GLOGO 690 SX Fan mount

Mikado GLOGO 690 SX Fueltank

Mikado GLOGO 690 SX Gyro Plate

Mikado GLOGO 690 SX Landing Gear Mount

Mikado GLOGO 690 SX Main Bearing Block

Mikado GLOGO 690 SX Pinion 13t

Mikado GLOGO 690 SX Rear Support Plate

Mikado GLOGO 690 SX RX Battery Plate

Mikado GLOGO 690 SX Sideframe