Generic Upgrades

Replacement main blade grip control balls with re-sized ball suitable for use with "standard" 3/16" control ball links such as "Rocket City" or Quick UK.
Fits T-rex 700 but also other models on demand
Set of 2

Stainless steel ball Head 4.7mm diameter 4mm tread length 8mm Joint Ball (4pcs)

Specifications:

• Ball is 4.7mm+-
• Length of the ball head( without the ball ) is 8mm
• Length of tread 4mm
• Tread M3
• Material- Hardened steel

Replacement Stainless steel Pushrod 2.5x25mm, 1 pcs

This pushrod is produced with rolled thread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x50mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod 2.5x30mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod 2.5x35mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x40mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x45mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x60mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x65mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x20mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x30mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x40mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x45mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x50mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

We offer hand made pushrods from TITANIUM Grade Medical 3, this is one of the best Titanium materials (produced in europe) you can buy.
the Tread is made by Push technology and not Cut, means there is no weak point at the point where the tread is stopped (different from cut where the point becomes a breaking point)

We use Medical grade 3 Road, and we are able to produce tread per needs. you can contact us for special lengths/treads, in general we can make push-rods up to any length, and treads up to 20mm each side.
Some standard sizes are here, but for custom products- contact us

price is per set of 2 pushrods.

Titanium Knurled Push Rod M3x50mm with Double Sides Counterclockwise Teeth

Set of 1 rod

Titanium Knurled Push Rod M3x70mm with Double Sides Counterclockwise Teeth
Set of 1 rod

Triangle shape Landing Skid Nut BLUE 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Triangle Landing Skid Nut Red 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment. m2.5 is very strong for all today FBL helicopters.
Easy and fine adjustable for the length of linkage rods. Made From stainless steel

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment every time and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack includes 4 rods

Choice of

• M2.5x65mm
• M2.5x71mm

Direct replacement for Standard pitch rod ( various lengths )

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment every time and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack include 2 RODS, M2.5mm, possible to add Quality Plastic ball links (2 per rod)

Lengths: 38 or 44 or 56mm

Direct replacement for Pitch Links connection Rod, M3 tread, 20mm long(perfect for connecting 2 ball links together)

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment every time and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack include 2 RODS, M3 x 20mm

Unbreakable special material Heavy Duty Landing Gear 550-700 size .We believe these special polymer resin undercarriages to be THE strongest and most energy absorbing units available. Suitable for use on all helis from 30 to 60 size.

Set of Black Skids and Struts.

Canopy Rubbers Robbe( fit other models) 4pcs

Carbon Landing gear RJX, align 600-700 size, sport edition.
Fits RJX helicopters, also can fit Align and other models 600-700 size.
Comes with metal adapters.

Flybar conus weight and stiffener.
Those conical  adapters must be fitted on any Helicopter to balance the flybar.
The conus creates good and equal Load Sharing on the Flybar Area and will prevent the flybar to weaken and break as a result of vibrations.This is a "Must" part for any Helicopter.
Fit 4mm flybars , made from  7075 Alu , set of 2 pieces.

Carbon Double Arm, made from 2mm reinforced carbon.
This arm will fit any Servo horn. Very Easy to adapt and to mount.

This Double Arm also using Offset Holes, can be used on different helicopters where the Offest is required.
The 2 slotted mounting holes allow for slight radial adjustment for 90 degree pushrods. The inside mounting of the carbon arms result in a more perpendicular pushrod.

Set of 3 arms

Fit 8mm skids, 500-600  size helis.
Green color, 4 pcs in a set

Swash Ball link Set, fits Raptor but also other flybar models

RAPTOR 30/50 - V1 & V2
Machined from solid alloy, this tail boom brace and fin mounting clamp offers a secure fitting for all types of carbon or glass tail fins. The positive split clamping system provides great rigidity for boom braces compared to the original plastic clamp.

Made from precision ground steel for excellent strength and corrosion resistance. Those flybars can help to improve hover stability for novice flyers and more 3D response for expert flyers.

Pack of 1 piece, 4mm diameter, 52cm long. Black color

Exhaust gasket sheet materials designed specifically for application in machinery, venting and extraction systems - particularly those used in Petrol or Nitro engine exhausts - need to be able to withstand very high temperatures over extended periods without failing.

Our paper gasket sheet is a cellulose fiber base impregnated with a plasticized chemical treatment to resist: oil, petrol, air, water, alcohol, grease and most solvents.

Oil paper jointing is used for engines, axles, pumps, pipes and tank flange joints. As such it finds application in the automotive, marine, aero and agricultural industries.

• Enables you to build your own infinitely customizable gaskets

The sheet comes in size of 10x10cm, if you need larger sheets, please ask us

the choice of thickness is

0.3 / 0.5 / 0.7 / 1.0mm- choose your thickness

Cut using your Scissors or Knife

Color may vary!

Use to attach long pushrods to each other

Made from Aftermarket High Density material , fits All clutch systems in thickness of 1 or 1.5mm

4 pieces of 180x12mm (can be delivered or as 1 pcs 60 x 200mm +-) for easier personal adaptation

DO NOT USE a normal Epoxy, it will not work!!! Best glue to use JB WELD(click to see)

Why do i need aftermarket material?

The material used in today systems example Align, and others is very thin, around 0.8-1mm.

After seen a lot of clutches broken in the air, the solution is  aftermarket material.

The main reason for those breaking clutches is the distance between the clutch and the material.

Example, the diameter of clutch (metal ) is 53mm, and the liner installed is 54. 1mm is free space allow the clutch to expand.

Material which clutch made from is spring metal which expand with turning, but it is very limited, and can expand to 0.3-0.5mm ,if more space is there, the clutch might break.

So if you need to change the liner, use thicker material and do the following:

Measure the clutch and the clutch bell, lets assume the clutch is 53mm, and the bell is 56.

If you put 1mm, it will be 54mm, so 1mm too much space- risk to break.

If you use 1.5mm, its better, however the clutch will be tight to insert,

In this case prepare the liner, and put manually into the clutch bell, if the clutch doesn’t go inside, please take it out and with the help of sandpaper 80-120, sand little for all the length and do the fit again.

You need to come to the point when the clutch will enter with a little force, and will show like it turns not easy.. but still turns. At this stage, glue all and make the fit test, if needed, sand the material inside the bell .

The result- after you start the heli first time, the clutch will show difficulty to turn, but after 2-3 flight it will “find it way” and it will have perfect fit. And it will last for very long time.