Fuel Accessories

IN-Tank Silicone Fuel Line 2mm inner ID, special for In-line fuel tank Nitro fuel.Very flexible. Pack of 1 meter

In diameter 2mm

Outside Diameter 3.5mm

Length, 1meter

Tube cap that is designed to fix to the model. Stop the tube from swaying

during flying as one end is fixed.

Red color

Conventional silicone fuel tubing used inside the fuel tank

This tubing is easy to get kink when doing violent aerobatic maneuvers and results in short supply of fuel when the model is in air. While for Kinkless tubing because of the material and the design used it can be bent in any direction freely.

Set Includes:

• 2 Kinkless lines
• Weight
• 155mm silicone tube

Simple and easy way to fill the fuel tank of your GAS model of 15cc+
Simply plumb it into the feed line between your fuel tank and your carburettor,

fit the fuel probe to your fuel bottle and you are ready to go.

When you push the fuel probe into the valve it shuts off the feed
to the carburettor and allows fuel to flow to the tank. When the fuel
probe is removed this restores the feed from the tank to the carb,
simple as that, it's also great for emptying the tank as well.

Please keep the fueling probe really clean, if any grit gets on it and you push it into the fueling valve it can get under the seals and cause problems.

Simple and easy way to fill the fuel tank of your nitro model, engines less than 20cc
Simply plumb it into the feed line between your fuel tank and your carburettor,

fit the fuel probe to your fuel bottle and you are ready to go.

When you push the fuel probe into the valve it shuts off the feed
to the carburettor and allows fuel to flow to the tank. When the fuel
probe is removed this restores the feed from the tank to the carb,
simple as that, it's also great for emptying the tank as well.

Please keep the fueling probe really clean, if any grit gets on it and you push it into the fueling valve it can get under the seals and cause problems.

Large filter with Overflow insert, comes with mountings.

Miniature aircraft 90 Degree Fuel Fitting Set, SET OF 1 full 90 degrees fitting

Muffler Pressure Nipple - M3 - 2 pcs, for DIY

Muffler Pressure Nipple - M4 - 2 pcs, for DIY

Nitro Fuel Line Translucent Silicone tube 2.5x4.5mm, 1m long, made from Hi temp silicone

Especially for pressure and density applications, where no faults expected such as use in Helicopters, Airplanes, Cars .

Dimensions
Inner ID: 2.5mm
Outer ID: 4.5mm
Length: 1M
Temperature : -60C to 220C

Nitro Fuel Line Translucent Silicone tube 2.5x5.5mm, 1m long, made from Hi temp silicone

Especially for pressure and density applications, where no faults expected such as use in Helicopters, Airplanes, Cars .

Dimensions
Inner ID: 2.5mm
Outer ID: 5.5mm
Length: 1M
Temperature : -60C to 220C

This is a O.S. Engines Large Super Filter, intended for use with Tank re-filling fuel pumps This Dense fibrous filter element is installed inside a fuel container using standard (medium) diameter fuel tubing and will help to ensure that your fuel stays clean during the refueling process.

After run oil for engine protection after use suitable for use with all engine types and compatible with nitromethane and methanol.
Bottle of 50ML

After run oil for engine protection after use suitable for use with all engine types and compatible with nitromethane and methanol.

Bottle of 30ML

Rubber grommet 8mm inner diameter for Fuel line

OD is 15mm

ID is 8mm ( perfect for any fuel line or wires installation in the frame)

10 pcs in a bag

SAB Fuel Tube 2,4 x 4,5 x 1000mm

Includes:

• SAB Fuel Tube 2,4x4,5 x 1000mm

Use for:

• Goblin Black Nitro

SAB Fuel Tube 2,4 x 5,5 x 750mm

Includes:

• SAB Fuel Tube 2,4x5,5 x 750mm

Use for:

• Goblin Black Nitro

Silicon Exhaust Deflector, made from High- Temp resistant silicone - 10 mm
Different colors, please ask for your desired color in order comments.

Thin methanol fuel silicone tube 2,5 x 1,0mm

Can be used in fuel tanks. Very flexible.

Pack of 1 meter

Universal in-line clear fuel filter fits 7mm hose lines.
Easy to use and install.
Good to replace it at regular intervals.
This item is re-usable,just clean the filter.
With a magnet: help to filter impurities,such as scrap iron,etc.
Provides maximum flow and optimum filtering simultaneously with virtually no restriction designed and manufactured for high temperatures and high filtration enviorments.
Universal fits for all fuel Non injected engines, or Fuel tanks

Yamada one way Check valve for Airplane #F1272 -Fit all YS engines

Yamada Check valve -Fit all YS engines

For Yamada (YS) Engines

Yamada YS High speed Needle O-ring #F1546

For Yamada (YS) Engines:

61ST2
91ST / SR / SRS / SR
96SRX
120SR / SRX

YS Engine Parts Back Plate Gasket for YS 61 , YS80ST #R6119

Set of 1

YS Engine Parts Back Plate Gasket for YS 61LS #YS1190

YS Engine Parts Diaphram 61 #F1247

YS Engine Parts Regulator Adjusting Screw O-ring #F1246

YS Engine Parts Regulator Gasket for YS 61 #R6134

YS engines Yamada Motor head gasket for YS 120SR

For Yamada (YS) Engines:

• 120SR / SRX

YS engines Yamada Motor head gasket for YS61 RC-ST2-ST #S7103

Fits YS engines 61ST, 61ST2, 61RC

YS engines Yamada O-Ring set

For Yamada (YS) Engines:

• 91ST / SR / SRS / SRX
• 120SR / SRX

An elegant solution to the problem of oil waste dripping from exhaust systems during transit / storage.

Use these exhaust plugs to prevent dripping oil and also to help seal the exhaust / engine internals from damaging corrosive moisture whilst the model is being stored.Available in 10mm and 12mm internal bore size on silicone rubber exhaust deflectors. Complete with O-Ring seal and easy pull ring for quick removal.

This is a premium translucent innder diameter of 3.2 mm , replacement Tygon fuel line for many small engine applications .Maintains air tight seal on fittings, even in extreme temperatures. Translucent material resists swelling & hardening.

Made for gas engines, pack of 1 meter

Size 3.2 x 6mm

A great item to help eliminate oil leaking from your exhaust diverter onto the carpeting of your car, home, or workshop! High quality anodized aluminum construction with steel pull ring.
Use these exhaust plugs to prevent dripping oil and also to help seal the exhaust / engine internals from damaging corrosive moisture whilst the model is being stored.Complete with O-Ring seal and easy pull ring for quick removal.

A great item to help eliminate oil leaking from your exhaust diverter onto the carpeting of your car, home, or workshop! High quality anodized aluminum construction with steel pull ring.
Use these exhaust plugs to prevent dripping oil and also to help seal the exhaust / engine internals from damaging corrosive moisture whilst the model is being stored.Complete with O-Ring seal and easy pull ring for quick removal.