eRCmarket

M3 Nylon Black Spacers, Screw, Nut, Hex M-F Stand off 180 pcs Assorted Kit Box

Type specification complete, the quality is reliable.
Never rust, beautiful,practical, durable and convenient for using.
Packed in a plastic box, good for storage and difficult to be damaged.
Nylon has the characteristics of insulativity,Non-Magnetic,thermal insulation,corrosion resistance and etc.

Specification:

• Material: Nylon
• Color: Black
• Quantity: 180pcs
• Stand-off Length: 6 ~ 20mm (not include male end thread length)
• Male end thread length: 6mm
• Screw Length: 6mm (not include top head)
• Thread: M3 (3mm)
• Thread pitch: 0.5mm

Accessories total of 180 pcs:
Type  :   Length(Size)   :  Quantity
M3x20mm Spacers / 20mm+6mm x 10
M3x15mm Spacers  / 15mm+6mm x 10
M3x12mm Spacers / 10mm+6mm x 10
M3x10mm Spacers / 10mm+6mm x 10
M3x8mm Spacers  / 10mm+6mm x 10
M3x6mm Spacers   /  6mm+6mm  x 10
M3x6mm Screw    /  8mm x 60
M3 Nut /2mm x 60

M3 X 10mm Knurled Thumb Screws, Thin Type (2 pcs)

M3 X 12mm Knurled Thumb Screws, Thin Type (2 pcs)

M3 x 10mm Nylon Hexagonal Female / Male Standoff Spacer

Set of 4pcs

M3 x 15mm Nylon Hexagonal Female / Male Standoff Spacer

Set of 4pcs

M3 x 30 Hexagon Socket Set Screws with Cup Point (10 pcs)

M3 x 40 Hexagon Socket Set Screws with Flat Point (10 pcs)

M3 x 5mm Nylon Hexagonal Female / Male Standoff Spacer

Set of 4pcs

Available in white color only.

M4 JR Transmitter Long Stick Ends BLACK

Give your radio a bling look.
CNC sticks for Futaba transmitters

Set of 2.

M4 JR Transmitter Thumb Stick Ends BLACK

Enlarged stick head provide more friction to your finger tips and thus have a precise control movement.

M4 JR Transmitter Thumb Stick Ends BLUE

Enlarged stick head provide more friction to your finger tips and thus have a precise control movement.

Drive Type: Hex Socket; Head Style: Hex Head; Material: 12.9 Alloy Steel

The strong adhesion allows the nano tape to stick (adhesion: attraction between 2 different fabrics). And because the paste is not actually done by means of glue, the tape also leaves no residue.

Other types of tape can be discarded after use, the adhesive properties have decreased or even disappeared. The best thing about this technique is that it is reusable. If the adhesive properties have decreased due to dirt, grease or other contaminants, you can hold the piece of tape under the tap and rinse it off. After it has dried, it is reusable.

Use:

Cut a piece to desired length and stick on a smooth surface. Then peel off the layer of plastic on the other side to get double-sided tape. It's that simple, no tricks

Delivery package

• length 1 Meter
• 2mm thick, 15mm wide

This propeller balancer is awesome at getting a propeller perfectly balanced. The design incorporates two magnets that suspend a central shaft that will rotate with very little friction resistance.

High Sensitivity Magnetic Suspension Propeller Balancer Max Load 300g

Balancer base and spindle included.
 

Main blades Reduction sleeve provided is made for blades with 5mm hole to mount on places with 4mm screw.
length of 12mm, 2 pcs in set

KBDD Extreme Edition Tail Blade for Blade MCPX Helicopter- Neon Green

Mejzlik produces high performance props featuring hollow blades fabricated from uni-directional and bi-directional carbon fiber and epoxy. Very light, super strong, with a solid hub area allowing them to be drilled for Multi bolt hubs.

The finish is a beautiful high gloss, clear epoxy gel-coat over black woven carbon fiber. The props are factory balanced.

FEATURES

Diameter : 18 inches

Pitch : 10 inches

Mejzlik produces high performance props featuring hollow blades fabricated from uni-directional and bi-directional carbon fiber and epoxy. Very light, super strong, with a solid hub area allowing them to be drilled for Multi bolt hubs.

The finish is a beautiful high gloss, clear epoxy gel-coat over black woven carbon fiber. The props are factory balanced.

FEATURES

Diameter : 19 inches

Pitch : 12 inches

Menz S wood propeller 20x6"

These propellers are made from kiln dried Red Beech. They produce plenty of power without being too noisy. They are very accurately machined. Sizes up to and including 20 inches are bored to 8 mm, larger diameter to 10 mm.

Replacement Metal Angle Gear (2pcs)  for retracts

Metal TAIL SUPPORT for 700 size helis

Metal Clevises M2

AV16-00201

Full cnc Metal compensator Arms for MS Stinger/iKARUS Viper

Metric Coarse Threading Die, M1.6 High Speed Steel

Manufactured to DIN223B  standards  the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

Die for 2.0 mm DIN 223B, HSS

Manufactured to DIN223B  standards  the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

Die for 2.3 mm DIN 223B, HSS

Manufactured to DIN223B standards the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

Set of 1 Die

Die for 2.5 mm DIN 223B, HSS

Manufactured to DIN223B standards the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

MICROBEAST Special adhesive foam tape, 4 pcs in pack

MIK4701 Blade holder arm

For the Mikado LOGO XXTreme 700 & 800

Mini FPV CCD Camera 600TVL DC 5-17V Wide Voltage input,  2.8mm Lense

• Color 600TVL Black & white 650TVL High Picture Quality, 1/3'' SONY SUPER HAD II CCD
• Support 2 to 4S battery (DC 5 to 17V) Wide voltage Power input
• Digital Noise Reduction(2 DNR), Low Power Consumption,Back light compensation (BLC)
• Anti-exposure function support car license recording(HLC)Features:

Specifications

• Image Sensor :1/3 SONY SUPER HAD II CCD
• Horizontal Resolution :600TVL
• Effective Pixel :PAL753(H)*582(V)
• Auto White Balance
• Manual/Auto/Auto tracking
• S/N Ratio :>60dB(AGC OFF)
• Electronic Shutter Speed:1/50 to 1/100,000sec
• Auto Gain Control
• Back light compensation (BLC)
• Min. Illumination :0.01Lux/1.2F
• Shading Area: 8
• Video Output:1.0Vp-p 75 ohm RCA output
• Power : DC 5 to 17V
• Dimensions : 28mm * 28mm
• Operating Voltage:5.0V-17.0V
• Operation Temp.–10C to +50C

Mini FPV Quad-Copter ideal for 250 FPV Quad Racing QAV250

 

Item Description

 

• Mini FPV Quad-Copter ideal for 250 FPV Quad Racing QAV250

 

Specification:

 

• Shaft Diameter: 250MM
• Weight: 90Gr
• Max Motor Pitch: 26.32MM
• Min Motor Pitch: 12.99MM

 

 

Note: Please use super glue to fix the landing gear.

Mini Pix Pixhawk 2.4. 8 PX4 Autopilot Pix 2.4.8 32Bit Flight Controller Combo including:

• 1 x MINI PIX Pixhawk 2.4.8 32bit ARM Flight Controller
• 1 x Buzzer
• 1 x Neo-M8N Gps Module
• 1 x Black Gps Holder
• 1 x Power module x1 (Yellow and black color Connector XT60 PM send randomly)
• 1 x Minim OSD w / shell
• 1 x I2C Expand Splitter Module
• 1 x PPM Module w / shell
• 1 x 433 MHZ 100 mw telemetry
• 1 x Cables

FMU Processor: SMT32f407 (32bit Cortx-M7 168Mhz Arm)
Sensor:
Gyroscope: ICM-20689
Accelerometer: ICM-20689
Barometer: MS5607
Compass: IST8310
Support for up to three, 1 x Compass with built-in, 2x External support 2 at maximum.

Interface Type CH1.25

GPS UART X2 (Support for Dual GPS)
UART Telemetry X2
I2C X1 (extended support)
Output PWM X6
RC in PPM / SBUS signal input
Current Input Voltage X1
BEC Servo Input X1
USB X1
SPI X1
M8N High Prec ision GPS Built in Compass

Work Environment and Physical Parameters (Job Condition and Physical Parameters):
USB voltage 5 V + -0.4 V
Input Voltage of the PM Module 5 V + -0.4 V
Servo 5-16 Input Voltage V
FC voltage 5 V
Temperature range-40-85 * c
Size & Weight
Size: L * W * H 36 * 36 MM (PCB only)
Weight: 9g (FC Single Plate)
A new generation of GPS M8N, with low power consumption and high preci sion, the final preci sion is 0.6 meters, in fact nearly 0.9 meters, higher than the previous generation 7N 1.4-1.6 meters preci sion, support GPS / QZSS L1 C / A, GLONASS L10F, BeiDou B1 protocol and mode or more.
Chip GPS parameters:
Receiver type 72-channel M8 motor
GPS / QZSS L1 C / A, GLONASS L10F, BeiDou B1
SBAS L1 C / A: WAAS, EGNOS, MSAS
The Galileo-ready E1B / C (M8N)
Nav. update rate1 Single GNSS: up to 18 HZ
Simultaneous GNSS: up to 10Hz
Accuracy2 position 2.0 m CEP
Sensitivity2 Tracking & Nav: -167 dBm
Cold starts: -148 dBm
Starts hot: -156 dBm
AssistNow Online GNSS Assistance
AssistNow GNSS Offline (up to 35 days) 3
Autonomous AssistNow (up to 6 days)
OMA SUPL & 3GPP compatible
TCXO Oscillator (M8N / Q),
Crystal (M8M)
Crystal RTC Embutido
Noise Figure On-chip L NA (M8M). L NA Extra for
The lowest noise figures (M8N / Q)
Anti jamming detection Active CW and Removal. Extra
Onboard SAW band pass filter (M8N / Q)
Supported active and passive antennas
Odometer Traveled in the distance
-Data logger For position, speed, and time (M8N)
Operating Temperature. - ° C to 85-40 ° C
Storage temp. - ° C to 85-40 ° C (M8N / Q)
-40 ° C to 105 ° C (-M8M)
RoHS compliant (lead-free)
Qualification according to ISO 16750
Manufactured and tested in ISO / TS 16949 certified local production
Uses chips qualified according to AEC-Q100 M8
Supply voltage from 1.65 V to 3.6 V (M8M)
2.7 V to 3.6 V (M8N / Q)
Power consumption4 23 mA @ 3.0 V (continuous)
5 mA @ 3.0 V Power Saving Mode
(1Hz, GPS mode only)
Power Backup 1.4 to 3.6 V

Mini reamer, CNC made, fits 4MM ball links, mostly used for Micro helis

Mini Starter Kit UNO with 1 Card & 13 Accessories

Aluminium Polished Muffler for 3MM 53TOC engine.

Prop set 10 x 4.7 ( Pusher and Tractor) , Set of 2L+2R.

These are very nice multicopter propellers that are quite stiff in comparison to similar props of ABS plastic construction. There is definite resilience to breakage combined with solid flying performance from these propellers

COMMENTS: For Electric flight only. Do not modify or attempt to use with Glow engines.