eRCmarket

Servo Connector - JR Female, Blue Line, Made in Germany for Construction,10 pcs

This is a special connector for  0.34-0.5mm2 wires.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

JR and SPEKTRUM Transmitter SWITCH NUTS

Full set including 8 pcs and Removal/installation tool. WILL NOT WORK ON THE 12X or 8103.

You'll notice that the upper rim of the nut is smooth. Some Transmitters have the slots cut in the nuts had sharp corners. If you using to put the fingers between the switches, this got to be very irritating. Those nuts have smooth rim.
The colors are just a bonus

Give your radio a bling look.
CNC sticks for JR or Hitec transmitters

Set of 2.

JST connectors set Male+Female 170mm. Good for up to 10 amps.

Conventional silicone fuel tubing used inside the fuel tank

This tubing is easy to get kink when doing violent aerobatic maneuvers and results in short supply of fuel when the model is in air. While for Kinkless tubing because of the material and the design used it can be bent in any direction freely.

Set Includes:

• 2 Kinkless lines
• Weight
• 155mm silicone tube

260mm KK260 FPV Racer Quadcopter combo set

Included

• KK260 Multicopter Frame Kit, Made from Nylon and fiber
• 4x Motor 2204-2300KV,(2 CW, 2 CCW)
• 4x ESC 12a
• 4x props
• 1x Power Distribution Board
• Wheelbase: 260mm
• Weight: 101g
• High strength, light weight

Required (package not include):
Flight controller
Battery: 800 - 1800mAh 3s 4s

260mm KK260 FPV Racer Quadcopter Frame SET

Included

• KK260 Multicopter Frame Kit, Made from Nylon and fiber
• Wheelbase: 260mm
• Weight: 101g
• High strength, light weight
• No electronics included

Required (package not include):

Propeller: 5 - 6 inch
Motor: 1806 /2204/ 2206
Flight controller
Battery: 800 - 1800mAh 3s 4s
Radio

Kontronik PYRO 850-40L Brushless Motor 276101
Already its size makes the new PYRO 800/850 impressive: an outside diameter of 63 mm and a shaft diameter of 8 mm suggest the enormous power of the latest KONTRONIK motor. A new design includes bigger ball bearings and a screw-fixed motor can.

This allows without any problem in 800 class helicopters, scale and 3D helicopters.

The new line is completed by the PYRO 850-24 which is perfectly designed for F3A applications. Having the same diameter, the PYRO 850 only differs 5 mm in length of the stator compared to the PYRO 800.

high-quality Neodym material has been used for the magnets – heat resistible up to 150 °C.
The winding has been made of an extremely heat resistant copper wire normally used by the aerospace industry. This wire can be stressed up to 300 °C.
The rotating can additionally gets a precise balancing making the thin section bearing unnecessary.
Adapted design for the stator
Perfected air stream through the motor and a radial internal cooling.
Optimized magnetic circuit.
Spec's

400 RPM/V
max. 25000 RPM
580g

Tuned-pipe for engines 10- 15 ccm, straight outlet,

ØD= 42mm, Øde= 20mm, Øda= 12mm, L= 275mm, Lg= 420mm, weight ca. 125 gr.

Perfectly fit 61size engines such YS, OS and Webra

Tuned-pipe for engines 20-25 ccm, straight outlet,

ØD= 42mm, Øde= 22mm, Øda= 12mm, L= 400mm, Lg= 550mm, weight ca. 160 gr

KS9010 Teflon coupler for tuned pipes diameter 20mm, 200mm length

Tuned-pipe for engines 30 ccm, straight outlet,

ØD= 50mm, Øde= 22 mm, Øda= 14mm, L= 400mm, Lg= 590 mm, weight ca. 190 gr.

KS 1342 Exhaust flange stub for OS-MOKI-WEBRA diameter 20mm, distance between holes 34mm

KS 1342 Exhaust flange stub for OS engines diameter 20mm, distance between holes 42mm

KS 1342YS Exhaust flange stub for YS engines diameter 20mm, distance between holes 31-32mm

KS 501 Exhaust reso Pipe Comfort mount mounting system for 42mm mufflers/pipes

KS 502 Exhaust reso Pipe Comfort mount mounting system for 50mm mufflers/pipes

KS 5020 Exhaust reso Pipe Comfort mount mounting system for 20mm mufflers/pipes

KS 503 Exhaust reso Pipe Comfort mount mounting system for 55mm mufflers/pipes

KS-Comfort Mount ABF-Header, for motor OS MAX, Moki, ASP, Webra, MVVS, with 2 bendable sections, ØD= 20mm, L1= 90mm, L2= 120mm, L3= 155, Lg= 240mm,

Distance between the exhaust boreholes 32 mm

KS-Comfort Mount ABF-Header, for motor OS MAX, Moki, ASP, Webra, MVVS, with 2 bendable sections, ØD= 20mm, L1= 90mm, L2= 120mm, L3= 155, Lg= 240mm,

Distance between the exhaust boreholes 34 mm

KS-Comfort Mount ABF-Header, for motor OS, ST with 2 bendable sections, ØD= 20mm, L1= 90mm, L2= 120mm, L3= 155, Lg= 240mm,

Distance between the exhaust boreholes 36-38MM, PROLONGED holes

KS-Comfort Mount ABF-Header, for motor OS MAX, Moki, ASP, Webra, MVVS, with 2 bendable sections, ØD= 20mm, L1= 90mm, L2= 120mm, L3= 155, Lg= 240mm,

Distance between the exhaust boreholes 42 mm

KS Stainless steel do-it-yourself Tube, 90 degree round Diameter 20mm

This tube is made for DYI made exhaust system, you can use silver solder or teflon/silicone to hold the parts together.

Tube diameter is 20mm, and the extended is perfectly cover insert of 20mm. so you can insert tube into tube easily.

Very precise part, made in germany, with total Radios RM of 33mm

See detailed image for more info

KS Stainless steel do-it-yourself Tube, Straight, Diameter 20mm, 200mm Long

This tube is made for DYI made exhaust system, you can use silver solder or teflon/silicone to hold the parts together.

Tube diameter is 20mm, and the extended part is perfectly cover the insert of 20mm. so you can insert the tube into tube easily.

Very precise part, made in Germany

KS Stainless steel do-it-yourself Tube, Straight, Diameter 20mm, 65mm Long

This tube is made for DYI made exhaust system, you can use silver solder or teflon/silicone to hold the parts together.

Tube diameter is 20mm, and the extended part is perfectly cover the insert of 20mm. so you can insert the tube into tube easily.

Very precise part, made in Germany

KS Stainless steel do-it-yourself Tube, Straight, Diameter 25mm, 200mm Long

This tube is made for DYI made exhaust system, you can use silver solder or teflon/silicone to hold the parts together.

Tube diameter is 25mm, and the extended part is perfectly cover the insert of 25mm. so you can insert the tube into tube easily.

Very precise part, made in Germany

With Auto Search Function! Support Fatshark, and other Video Transmitters, delivered with Charger, and Sun shade.

Features:

• Built in Dual Receiver Automatically for the best reception Automatic Antenna Switching
• Dual buffered AV Output
• Can receive 2 different channels at the same time
• Not affected by 2.4G videos
• AV receiver with diversity inputs
• Small, light weight, durable
• 4 bands and total 32 channels
• Built-in battery, easy to carry and outdoor use
• A key to automatic signal search, simple operation
• Work status OSD display: Always be aware of the device working condition

Specification:

• Built-in 5.8Ghz dual diversity receiver automatically for the best receiption
• Built-in 2Ch 5.8Ghz AV output and I CH AV input
• Built-in high performance 7.4V 2450mAh Li-Po
• Work Status OSD display: RSSI indication; Battery indicator; Channel indicaton
• A key to automatic signal search
• Support Chinese and English Menu
• Size: 180mm X 120mm X 50mm (Note: Sunshield height: 28m)
• Working Voltage: DC7-16V
• Power Consumption: max 650mA@12V
• Battery Charging Current: 850mA@12V (Max)
• Working Temperature: 10C ~ 65C

 Display Parameter:

• Screen Size: 7"
• Screen Type: TFT LCD Screen/ Long life, LED backlight
• Resolution: 800 X 480
• Brightness: 450cd/m2
• View Angle: 140/120 degree

 Package Include:

• 7" LCD Screen Receiver Monitor with built in Rechargeable Battery X 1
• 5.8G Antenna X 2
• AV Cable X 2
• Charging Cable X 1
• Charger 220v
• Sun shade

Led Strip, with powerful SMD leds, can be glued any where. Popular on Night flying machines, Quad copters, and more.

Comes with adhesive material, can be cut each 5cm.

Dimensions: 8mm width SMD Flexible strip series, 60LEDs/meter

Available colors- White, Red, Yellow, Blue, Green .
Sold per 1 Meter.

Lighting ready set with plug & with 8 Hight Power LEDs
For model planes and helicopters

Specifications:

• Operating voltage: 4 - 6V (or 2S LiPo)
• Current: 1200mA
• Dimensions of the control unit: 55 x 55 x 10 mm
• colored 5mm LED's (bright, flashing)

Lighting ready set with plug with 8 highly competitive LEDs, ideally for flight models, Helicopter and Multicopter!

Simply connect the LED cables finished with plug with the LM-1 tax unity and connect whole with a power source of 4-6 volts (e.g., on a free output socket).

Extent of supply:

Tax unity LM-1 2 x white LED (shining) 1 x green LED (shining) 1 x red LED (shining) 2 x white LED (stroboscopic shining) 2 x red LED (slowly shining)
Small parts, manual German / English

Technical data:

• Input voltage = 4.0-6.0V
• Current admission = 30 mA
• Dimensions (LM-1) = 34 x 26 x 12 mms
• Dimensions LED = 5 mms (diameter), (9-mm construction)
• Weight(Importance) (LM-1) = 9 gs / complete set cable with LED = 19 gs
• Cable length LED = 600 mms (extendable)

This is the best Insurance to Fly Safe and to keep your Lipo packs going Under charge and Model loss.

Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

Special Light led and sound will be heard / seen from long distance.

This product designed to work with ALL lipos 3S- 8S

Lipo packs must not be discharged below approximately 3.0 Volts per cell. Even a single deep discharge may permanently damage your pack. The tiny Lipo Voltage Guard operates in parallel with your Electric Speed Controller. It will flash a LED when your pack drops below a preprogrammed voltage threshold. The factory setting is for 3 cells , 3.0V per cell, with 'timed minimum hold'. The LiPo Voltage Guard may be easily reprogrammed to suit your own requirements with your transmitter/ receiver the supplied programming lead and your flight pack or power supply capable of any voltage between 5 and 45 volts.

Specifications:

Microprocessor controlled, auto calibrating, 10-bit A/D converter with digital signal processing.

Operating voltage: 5V - 45V
Minimum threshold: 5V (2 cells, 2.5V / cell)
Maximum threshold: 34V (10 cells, 3.4V / cell)
Precision: 1% or better
Current draw: 35mA during alarm state, <10mA otherwise
Weight: 4g
Size: 28mm x 20mm x10mm

Longer aluminum Pitch compensator arms CNC 51mm machined ( 2 Arms) Gives increased pitch range without large movement. Prevent Bending

M3 Futaba - Spektrum DX6i, DX7s, DX8,DX9 Transmitter Long Stick Ends BLACK

Give your radio a bling look.
CNC sticks for Futaba transmitters

Set of 2.

M3 Futaba - Spektrum DX6i, DX7s, DX8,DX9 Transmitter Long Stick Ends BLUE

Give your radio a bling look.
CNC sticks for Futaba transmitters

Set of 2.