eRCmarket

G10 FRP fiber sheet , size 400x500 mm,
Thickness 1.0mm

With This ignition switch you can turn safely OFF the gas engine with your remote control,It concerns with the switch to a fiber-optic decoupling to the ignition of the remote control isolate - therefore there can be no interferences

Product Features

• Bright LED indicates when the ignition is switched on
• Fiber optocouplers for input / output
• Microprocessor control
• Suitable for LiPo, Li-Ion, A123, Ni-Mh, Ni-Cd
• Input voltage to 20 volts, 16 amperes, MosFet output
• Low voltage to 3 volts 3 amps output
• Low voltage drop - Less than 150mV
• Weight: 8g
• Dimensions: 35 x 17 x 7mm

This device is inserted into a free slot (channel) on the receiver. Please note that the ignition switch is not a voltage regulator, ie it is the full battery voltage to the ignition.

This is a premium translucent innder diameter of 3.2 mm , replacement Tygon fuel line for many small engine applications .Maintains air tight seal on fittings, even in extreme temperatures. Translucent material resists swelling & hardening.

Made for gas engines, pack of 1 meter

Size 3.2 x 6mm

GEAR & shaft set B for co-axial Esky and others

Gear box-ratio 3.75:1 / 5.43

Gearbox motor mount

A superb gift idea for Christmas, Birthdays and Special Occasions. These gift vouchers can be used to purchase any of our products and are available in Any value. Order any quantity or combination of values to make the amount you wish to purchase. No expriration date. 5% Extra offered with a purchase of 100+ eur voucher Voucher with the code will be emailed after the purchase is complete Vouchers to be returned as payment against goods only, no cash alternative will be offered.

Glass fibre rod D9,0 x 1.000mm

The 50mil manual glue gun is a light, compact cartridge gun giving reliable output of two part adhesives. This gun accepts all common ratios of adhesives and the plunger can be changed out to convert from one ratio to another. The strong, durable design was created to eliminate cartridge cracking.

This cartridge gun is perfect for dispensing a wide range of two part adhesives including epoxy, acrylic, urethane, MMAs and more. Simply insert your two adhesive cartridge into the gun (make sure you have the correct plunger for your dispensing ratio) and attach a static mixer nozzle to your adhesive cartridge. Then pull the comfortable 4 finger trigger and your adhesive will be pushed through the static mixer and onto your substrate.

3mm 24K gilt terminal pin contact x 2pcs
3mm 24K gilt terminal socket contact x 2pcs

Works well up to 60 amps
very low resistance
Set including 2 pairs

3.5 mm Gold Bullet Connector Plug 3.5mm banana  connector rc helicopter
Golden plated , 13mm long, 3.5mm diameter. This is the Lowest resistance connector that used on Large controllers and Motors.

Specification:

• Contains: 2 x male + 2x female
• Diameter: 3.5mm
• RC Connector for battery
• weight:1.5g/pair

Guide for Fuel Line End (Fuel tube stop plug) set of 2

High efficiency Propeller , For slow fliers, Shock fliers, and flying boats .
Different Sizes to choose .
Pack including 2 pieces
Size: 4x3.5

COMMENTS: For Electric flight only. Do not modify or attempt to use with Glow engines.

Stainless Steel Half Round button Flange Head with Washer Inner Hex Socket Allen Screws Bolt - M4x8

FEATURES 304 stainless steel, anti-corruption, and great durability
Widely used for heavy-duty use and offer extra support
Very good fixing effect

Specifications

• Screw Type:Machine Screws
• Color : Silver
• Package Includes 10 x Hex Socket Screws

Metal starter ring for 20cc-30cc Zenoah engines and clones. Replaces stock plastic pawl. Designed and manufactured for maximum reliability and compatibility. Resists shearing and breakage, especially with high-compression engines.
Dont get stuck with broken plastic recoil.

 Hardware Set for Blade mCP X BL

Hatori 562 50 SIZE 600 Nitro helicopter Exhaust System For YS56SR & OS55

For OS50 OS55 YS50 YS56

Thunder Tiger53

Muffler Weight: 120g

Twisted servo wire , made from Heavy Duty Silicone Cable 0.35 mm/2. 3 Colors(white-red-black).

This Very flexible cable can be used for extensions,

Batteries and more.Unique and Very low resistance .

Length of 1 meter.If longer cable needed, please specify in comments

Twisted servo wire , made from Heavy Duty Silicone Cable 0.50 mm/2. 3 Colors(white-red-black).

This Very flexible cable can be used for extensions,

Batteries and more.Unique and Very low resistance .

Length of 1 meter. If longer cable needed, please specify in comments

Head shim Novarossi 91

HEAD GASKET 15cc SHORT STROKE SHIM 0,3

Heavy Duty Autorotation clutch with improoved one way bearing. Lighter construction .

This clutch is a direct replacement for the original Raptor unit. The hinge points have been extended to provide a more progressive drive take up and to reduce the chances of stress fractures. Supplied complete with one-way bearing.

Fit Raptor 90

Excellent quality made in Europe, those cable made from PVC 3x 0.35mm cable, length 20 cm
Fits Futaba / Jr Provided Quality!
This cable is produced and tested with most modern procedures.
Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.
Those cables provided with 3 years warranty

Heavy Duty Silicone Hi-Temp Fuel Line

Especially for high pressure and density applications, Fuel line for Helicopters, Airplanes, Cars .

Dimensions
Internal ID 2mm
External ID 6mm
Pack of 1m
Temperature : -60C to 220C

Carbon Universal Servo mount, fit almost All helicopters

Carbon black or Silver

High Quality Cable Ties, 4.8mm x 200mm Long perfect for holding Servo Wires, and holding other applications.

Heat stabilized cable ties are ideal for use in applications exposes to higher temperatures.

Made from Nylon 66. Class UL94 V2

Pack of 10 Ties, Black Color

High Quality Cable Ties, 4.8mm x 370mm Long perfect for holding Servo Wires, and holding other applications.

Heat stabilized cable ties are ideal for use in applications exposes to higher temperatures.

Made from Nylon 66. Class UL94 V2

Pack of 10 Ties, Black Color

High Quality Cable Ties, 7.6mm x 370mm Long perfect for holding Servo Wires, and holding other applications.

Heat stabilized cable ties are ideal for use in applications exposes to higher temperatures.

Made from Nylon 66. Class UL94 V2

Pack of 10 Ties, Black Color

Socket head cap screws are a headed and externally threaded part designed for insertion through a close tolerance, internally tapped hole and mated with a nut.
Hex Cap Screw M2.5x10 (10pcs) DIN 912 Stainless screws, 10 pcs in set
Made from A2 stainless steel .Designed with hex socket head and Stainless material

Black color, D912 12.9 . Set of 10 pcs

Black color, D912 12.9. Set of 10pcs

Black color, D912 12.9 . Set of 10 pcs

Black color, D912 12.9 . Set of 10 pcs

Black color, D912 12.9 . Set of 10 pcs

Black color, D912 12.9 . Set of 10 pcs

Socket head cap screws are a headed and externally threaded part designed for insertion through a close tolerance, internally tapped hole and mated with a nut.
Hex Cap Screw M3x10(10 pcs) DIN 912 Stainless screws, 10 pcs in set
Made from A2 stainless steel .Designed with hex socket head and Stainless material