eRCmarket

Dream, Design, Deliver with VHB 4991 tape. It is a gray 2mm, multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces.

Perfect for Electronics applications, receivers, gyros, and wires. and small servos

• Pack of 1meter
• 2mm thick
• 25mm wide

Driven belt 460 XL, LOGO 400

IF YOU think it’s expensive to hire a professional, wait until you hire an AMATEUR

Sounds familiar?

Considering doing photos with Drone? Need to be informed about the rules? What machine is the right one for me? Can I fly it?  How to assemble?

If one of those questions passed throw your mind, we can help.

35 years of experience with RC, Engineering background, MBA knowledge- is all we need to make the right choice with you. Combining your needs with our experience, and you get the right product.

Together with this we offer a session of introduction to Drones, basic Theory info, which will be given as Information Session of 2-3 Hours.

*Session cost can be refunded,  Contact for more info
 Sessions will be scheduled on demand.

This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

Very low Draw of current, Strong light

• Light Color: Blue
• 30mm diameter- easy placed, and also can be put in certain motor mounts.
• Light visible till 300 Meters
• Power supply: 11-12v, Balancer 3s connector.
• Weight: < 5 gr

This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

Very low Draw of current, Strong light
 

• Light Color: Cool White
• 30mm diameter- easy placed, and also can be put in certain motor mounts.
• Light visible till 300 Meters
• Power supply: 11-12v, Balancer 3s connector.
• Weight: < 5 gr

Replacement  DSR-NR46/R46 Driving Gear for retracts

Double Ball Bearing start system set including : Clutch bell, special Hardened Pinion , choice of 14-15-16T ( one pinion per set) , Ball Bearings, start block and hardware are included in a set, and those are a direct replacement for Millenium 2 / 3 and Dyna-X start system. Reduces movement of the Pinion during Extreme 3D, and protecting the pinion from been exposed to dust. Anodized in Clear.

40PCS Dupont wire 20cm cable Line color 1p-1p pin connector

Length: about 20 cm /8-inch

Product Options:

    M-F Male to Female
    M-M Male to Male (PIN-PIN)
    F-F  Female to Female (HOLE-HOLE) 

Dyna-X was designed around RobbeMillenium mechanics. Designed, Produced in Germany. made from proper Aluminium 6061

Main idea is to combine Genuine Robbe mechanics, with improved 2 pieces frames (Same idea as the Futura SE). In frame Specially designed Aluminum X- components, which together create a extremely strong and lightweight structure and very light Helicopter.

Rigid and Lightweight engine mount with Central support unit, Aluminum servo rockers and Landing gear plates are just a few of the advantages of Dyna-X. This helicopter designed for both F3D and FAI . Built around 90 size engine, without further  need of upgrading or changing components.

All components are designed with an emphasis on function and durability, not on economic production. This machine is very smooth, light and the strongest on the market.

Since Dyna-X was designed to work with Robbe mechanics, it will accept most of Robbe upgrades.

Specifications:

• Main rotor diameter: 1490-1530 mm
• Tail rotor diameter: 300 mm
• All-up weight: 4300 g
• Height: 450 mm
• Motor size: 15.00 cm3 or electric
• Swashplate : Robbe System 88

Contains

• 1- Carbon Frames + Ground plate
• 2- All CNC Metal in-frames components
• 3- Fuel tank-Specially made for Dyna-X
• 4- Hardened 15T pinion
• 5- 2.5mm Titanium Pushrods for pitch Push pull
• 6- Servo Tray and Swash guide Adaptor.
• 7- All Necessary Hardware+Bearings

This is a package deal for Dyna-X Deluxe Conversion.

• Main rotor diameter: 1490-1530 mm
• Tail rotor diameter: 300 mm
• All-up weight: 4300 g
• Height: 450 mm
• Motor size: 15.00 cm3
• Mixing : Mechanical

Contains (STD kit)

• 1- Carbon Frames+Ground plate
• 2- All CNC Metal in-frames components
• 3- Fuel tank-Specially designed for Dyna-X
• 4- Hardened 15T pinion
• 5- 2.5mm Titanium Pushrods for Pitch Push pull
• 6- Carbon/Metal Radio Tray and Swash plate holder adaptor.
• 7- Necessary Hardware & Ball Bearings

Deluxe Kit include also:

• 1-Carbon/metal CNC radio tray.
• 2-Carbon Boom supports 8mm
• 3-V2Dyna-X fiberglass Canopy
• 4-CNC Tail Gearbox ( complete with the double arm)
• 5-Metal Bell Mixers
• 6-Dyna-X carbon fins

See the Dyna-x video

New Design, with beautifull logos of Dyna-XA4 size

The Sullivan Dynatron is probably the most strongest started in the world. Heavy-Duty, Super High-Torque 12- 24V input Starter
that will Start All Model Engines, Including 1/4 Scale.

FEATURES:

• Super High-Torque 12V or 24V
• Starts All Model Engines, from .09 to 100cc
• "Instant-On" Fingertip Control Switch
• Full Protection Hand-Guard for Extra Safety
• Standard grey rubber reversible insert
• Aluminum pulley groove drive cone
• Front plate guard adaptable for left handed use
• Two year warranty
• 46" wire lead (not coiled)

INCLUDES:

• One Dynatron Super Power Starter w/Aluminum V-Groove Drive Cone
• Two Alligator Clips with red and black plastic sleeves
• Instruction sheet and warranty card

One large X brace

One Small X brace

Left and right engine mounts

One piece of CNC Servo rocker.

Tail Boom Spacer , 1 piece

1 piece of metal skid brace

Flat Frame Spacer , SET OF 1

Central engine mount

Lower U-Shaped Engine mount

Front Bell Crank Spacer

M3 Threaded Round Spacer (1)

Unthreaded Round Spacer ( 1)

Half collective pitch arm

double ended closed loop collective pitch arm.

Collective pitch control shaft

Ground Plate

Set of 1 frame, or complete set including the ground plate DYX0021

Two Long canopy alloy mounting

Three Ball joints for the collective levers

Collective pitch Push/pull rods . SET OF 2

This is the Set including: Mount plate and Pinion needed to use when converting Millennium / Dyna-X to Electric.

Motor Plate- Made from 7075 Aluminum, Anodized for Full oxide protection ( No real need, but we like our parts prefect ).
If you use Dyna-X, we will supply Spacers to fit the frames.

Pinion of choice Diameter 5 / 6 or 8mm / Module 1, Hardened Pinion, made from Stainless steel with special surface coating for perfect and quiet transmittion.

Included in Set ( Product Options)

• Motor Mount, made for 25mm screw distance motors
• Hardware (Screws/Shims)
• Spacers x 4( to fit Dyna-X) frames
• Pinion of Choice (M1)

This is the Set including: Mount plate, Pinion, and third bearing support,especially for very long shafts (48mm and longer). This is  all needed to use when converting Millennium/Dyna-X to Electric.

Motor Plate- Made from 7075 Aluminum, Anodized for Full oxide protection
If you use Dyna-X, we will supply Spacers to fit the frames.

Pinion of choice Diameter 5 or 8mm, Hardened Pinion, made from Stainless steel with special surface coating for perfect and quiet transmitting.

Included in Set (Product Options)

• Motor Mount- made for 25mm screw distance motors
• 3RD BEARING (S4605) for 5 MM shaft
• Hardware: 4 x HEX M3x8mm / 2 x HEX M3x50mm / 2 x M3 Locknut
• Spacers x 4 (to fit Dyna-X) frames
• Pinion of Choice

 Special unit EDF for Global Hawk, assembled, with Brushless motor, and ESC 60amp.