eRCmarket

FEATURES AT-A-GLANCE

    Up to 12-cell Lithium battery (50.4V)
    140A continuous current with 280A surges
    Power and signal for ESCs conveniently located in corners
    12V navigation light power available at each cornerBuilt-in power distribution
    Built-in voltage and current sense
    Redundant power supplies for flight critical components
    Payload connectors with resettable fuses for 5V, 12V, and direct battery power
    Good power and error indicator lights
    Built-in buzzer with volume control
    Connectors for every function of Pixhawk Cube
    Easily accessible PWM voltage level selector (3.3V or 5V)
    Resistant to ground bounce on PWM signal
    Connector-compatible with standard ProfiCNC carrier board
    Connector ports for debugging IO and FMU processors

STANDARD CABLES:

4-pin JST GH
6-pin JST GH
PAYLOAD POWER CABLES:

4-pin Clik-Mate 1.25mm (for 5V payload power)
5-pin Clik-Mate 1.25mm (for 12V payload power)
6-pin Clik-Mate 1.25mm (for battery payload power)

NOTE: Pixhawk 2.1 Cube NOT included.

Thin methanol fuel silicone tube 2,5 x 1,0mm

Can be used in fuel tanks. Very flexible.

Pack of 1 meter

 Instructions:

•   New design High scale Trail Link strut with foamy wheel for DSR-R30 Retract.
•   Hardening Steel Wheel Axle
•   Suitable for all DSR-30 Series Retract unit
•   High impact Aluminum Alloy
•   High precision CNC cutting
•   Light, and more strength.

Specifications:

•   Upper leg diameter: Φ8mm
•   Dimension: 93.5mm Hight without wheel
•   Weight: 14g (approx.)

Tubing Coupler - set of 2

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V2 version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:
Switch Cap (Fringe Bottom) *8pcs
 

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V2 version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:
Switch Cap (Fringe Bottom) *8pcs
 

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V3+ version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:

• Switch Cap BLACK (Fringe Bottom) 8pcs
• Cap Sticker 8pcs

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V3+ version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:

• Switch Cap BLUE (Fringe Bottom) 8pcs
• Cap Sticker 8pcs

TX Switch Knobs Cap BLACK Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLACK Short V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLUE Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLUE Short V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap ORANGE Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap ORANGE Short V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap RED Long V3 (2pcs, Fit All Brand TX)

Contents:

Switch Knobs Cap x 2pcs

O-ring x 2pcs

Hex Nut x 2pcs

TX Switch Knobs Cap RED Short V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

Washout Set

FLYBAR PADDLE SET

TAIL ROTOR BLADE

Special quick-setting adhesive for assembling rigid polystyrene foam (eg Styropor®), and in conjunction with other materials.
The elastic adhesive film is colourless and waterproof.Materials:
Rigid foam materials such as Styropor®, and in conjunction with other materials such as wood, paper, metal, ceramic, plaster, textiles and various plastics.
Also highly suitable for sticking photosInstructions for useApply adhesive to both parts to be stuck together. Leave to dry. Once dry to the touch (after approx. 10 minutes), press together very firmly for a short time. Take care not to damage rigid foam material.

Curved Micro Hemostat

These items have many uses in a lab, a shop or at home, holding or clamping small or hot items, or reaching into tight places. They can be used for assembly and manufacturing or repair work of many kinds.

Made of stainless steel with semi-polished finish, all feature box joint, serrated jaws and rachet lock to ensure a secure hold.

Lenght- 12cm

Best quality hemostat with high polish finish and tough serrated jaws. Imported from Japan.

These items have many uses in a lab, a shop or at home, holding or clamping small or hot items, or reaching into tight places. They can be used for assembly and manufacturing or repair work of many kinds.

A simple tool with small needle-nose jaws that lock closed with a ratchet on the handle end. Use it to pick up and hold small items, clamp parts together for gluing, or as a handy heat sink when soldering.
Made of stainless steel with semi-polished finish, all feature box joint, serrated jaws and rachet lock to ensure a secure hold.

Lenght- approx 13cm

Unbreakable special material Heavy Duty Landing Gear 550-700 size .We believe these special polymer resin undercarriages to be THE strongest and most energy absorbing units available. Suitable for use on all helis from 30 to 60 size.

Set of Black Skids and Struts.

Enlarged stick head provide more friction to your finger tips and thus have a precise control movement.

The length of the stick can be adjusted and fixed with a set screw.

Avaliable for Jr (M4)
Colors-Black

Variable Bell Mixer V2 for Robbe helicopters, Futura, Millenium, Dyna-x .New design, variable mix ratio, fits Dyna-X and Robbe helicopters.New, stronger design makes this item a star .

This item delivered as 2pcs  mixers in a set

VARTA Plug Charger +4AA Batteries

VARTA Plug Charger Nickel Hydride (NiMH) (AA & AAA size)

• Charges up to 4 batteries at once
• 2/4 AA or 2/4 AAA batteries
• Safety Timer - no overcharging
• Plug charger
• 2 LEDs (1 for each pair)
• Global voltage - worldwide use (100 - 240V)
• Charging time 5 hours
• 3-year guarantee
  

Specification:

• VARTA Type    57667
• Cell sizes   AAA, AA
• Systems to charge   Nickel Hydride (NiMH)
• Cell configurations:
• AAA   2 or 4 pieces
• AA   2 or 4 pieces
• Charge currents:
• AAA   150 (± 10%) mA
• AA   350 (± 10%) mA
• Indications:
• Green LED off   End of charge
• Backup-Timer:
• AAA   8 h
• AA   8 h

VARTA Rechargeable Accu AA 2600 mAh

The unexcelled energy solution for demanding consumers: with the new VARTA highest "Ready To Use" capacities you will enjoy your device performances at their best.

Unique: highest "Ready To Use" capacity for AA with 2600 mAh
Pre-charged technology for immediate usage and very low self-discharge
Rechargeable without any memory effect
Suitable for the most demanding devices like photo cameras and flashes - as well as for all chargers and all standard devices

Specification:

• VARTA Type    05716
• Reference IEC    HR6
• Battery Size    AA
• Height    50.5 mm
• Weight    30.0 gr
• Electrochemical System    Nickel-metal Hydride (NI/MH SINT)
• Capacity    2600 mAh
• Voltage    1.2 V

Silicon Tube IP67 Flexible LED Strip 1 METER, 60leds/meter 5050 Waterproof LED
Choice of colors: Red, Yellow, Green, Blue, White
Easy to glue, flexible, weather Proof

Description:

•   Silicone tube encased waterproof IP67
•   5050 SMD LED as the light source
•   High Brightness, All single color
•   High luminance efficient and low power consumption
•   Easy Installation, 3M self adhesive tape in backside
•   The flexible LED strip can be divided by every three leds
•   Long Life over 50, 000 hours of usable life
•   CE RoHS compliant
•   With 2~3 Year Warranty

Specifications:

•   Dimension: 1 meter, 8mm wide
•   LED Chip:  5050 SMD TOP LED
•   LED Quantity: 60pcs/meter
•   Material: FPC + Silicone
•   Beam Angle: >120°
•   Working Voltage: DC11V - DC24V
•   Rated Power: 14.4W/m

WestonUk Genesis pipe 90 PRO+ for 60-90 engines, fits Helicopters and Airplanes

High speed adjustment needle for Walbro WT-603 / WT-668 carburetors.

Y-connector Futaba  BLOCK 0.5mm silicone cable, gold plated connectors Made in Germany !! excellent cable quality.
Made from Silicone cable 3x0.25 mm, length of 30cm.

Provided Quality This cable is produced and tested with most modern procedures.
Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.

Y-connector Futaba 0.25mm silicone cable, gold plated connectors Made in Germany !! excellent cable quality.
Made from Silicone cable 3x0.25 mm, length of 30cm.

Provided Quality This cable is produced and tested with most modern procedures.
Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.

The Stealth HD Drone takes you to the next level with super easy drone flying and perfect video recording. With the built in 2MP 720p HD camera you can shoot pictures and record video in high resolution. The HD camera can be controlled on the 2.4Ghz Transmitter so you can take the picture on the perfect moment!
The YellowRC Stealth HD drone comes with a 2.4 Ghz transmitter which is designed to feel just like an joy pad so it has a comfortable grip. This transmitter provides the drone a safe control distance of 50-75 meters so it is enough to have some fun flights.
The Stealth HD Drone offers you a Gyro Stabilized flight. This means that the Drone is stabilized for easy controls.
If you are a more experienced pilot you can switch easily to the  expert mode and be the fastest pilot in the air!
 
Underneath the Stealth HD Drone we have mounted an 2MP 720P HD camera. This camera can shoot high resolution pictures and record nice videos. You can start/stop the video easily on the transmitter with a simple button click and it will be saved on the included micro SD Card.

Special features:

• Gyro stabilized
• Headless function (very easy to fly for beginners!)
• Automatic 360 degrees flips!
• 10 minutes flight time
• A larger 700mAh battery is seperately available

 Includes:

• Stealth HD Drone.
• 2MP 720 HD Camera.
• 2.4 GHZ transmitter.
• 3.7V 500mAh LiPo battery.
• USB charger.
• Spare set of propellers.
• Micro SD Card.
• USB SD reader.
• Tool.
• Stickersheet. 

Specifications:

• Width: 410 mm
• Overall Height: 75 mm
• Rotor Diameter: 140 mm
• Battery Type: Lithium Polymer (LiPo)
• Battery Voltage: 3.7V
• Battery Capacity: 500mAh
• Replacement Battery: 700mAh Part#YEL2709
• Flight Time: Up to 10 Minutes
• Camera: 2MP 720P HD 

Special Features:

• Automatic 360 Flips
• Headless Function

 

Made for gas engines, pack of 1 meter, avaliable in Red or Yellow.

The Z-RC billet intake manifold is CNC machined from billet aluminum. Two teflon gaskets ensure superior sealing. Tall design lengthens intake track for improved low-end torque. Provides thermal insulation from engine heat. Will not warp or crack. Designed to provide more reliable engine operation and performance by eliminating troublesome air leaks.

Fits Zenoah G230RC / G260RC / G231PUH / G260PUH / G260PU / G231PUM / G260PUM engines. Also fits Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 engines.
Works with Walbro WA / WT series carburetors

Complete gasket set for Zenoah G231PUM / G260PUM / G231PUH / G260PUH engines