eRCmarket

Stainless Steel clevises , Treaded for M2 rods.
Pack of 10

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set includes 1 Hybrid ceramic bearing

RAPTOR 30/50 - V2 & TITAN

Heavy duty stainless steel hub as a direct replacement for original alloy units.
Uses short (M3 x 3) set screws to secure to tail output shaft and M3 x 6 socket cap screws to retain bearings.
Compatible with original bearings, shaft and blade grips and supplied complete with all necessary fasteners.

This is Not a stock item, delivery time need to be agreed, made on order only.

The Validus GRS is our biggest engine starter yet! Professional starter for large engines up to 350cc. It features a 3" Aluminum Nose Cone, silicone insert, and HD 6 gauge wire with standard battery post connections. Double handle grips molded to fit the shape of your hand.

1-3/4 hp provides huge starting power

• Stall torque is 225 inch-pounds or 3600 in-oz
• 4000 no load rpm
• Maximum current draw is 600A
• CCW (Normal) Engine Rotation

500-600 SIZE (8mm shaft) will fit the new Ultralight Extreme 3D Edition swashplates. A perfectly level swashplate is one of the most important factors in having your helicopter fly straight and handle well.

This handy tool makes it easy to check and set your swashplate alignment at all points of collective travel from full negative to full positive and all points in between. Using the leveler you can easily adjust out most of the interactions inherent in all eCCPM systems.
With this tool and a few moments time your heli will lift straight off on it's maiden flight and will track better through all flight maneuvers!

Single Switch with Fuel Dot in an aluminum housing.

This item features a single switch with charge jack and a single fuel dot - with heavy duty 22AWG silicone wire.

These switches are made of CNC aluminum with high quality switch hardware. All controls are at a touch of your fingers and can be easily installed behind a hidden door on the aircraft.
Designed for longevity, these are anodized and designed to last.

Switch caps for JETI Transmitters - BLACK (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - GREEN (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - RAINBOW (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - RED (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - WHITE (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - YELLOW (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

The Megatron Starter. An awesome starter for the modern range of large high performance RC engines. This starter is designed for years of flawless service. It can handle engines up to 80 cc or 4.90 ci, depending on engine condition and compression ratio.

This starter features 3″ aluminum cone, 3″ silicone rubber insert, double steel handles and front ball bearing.
The S651 Megatron Super Duty Starter can be operated at 12 or 24 Volts.
Output 600 in-oz of torque on 12 Volts, 1200 in-oz of torque on 24 Volts. 280 no load RPM.
Maximum current draw 100 Amps at 12 V.

Precision tail rotor control arm for Robbe Helis,The tail is very precise, and stays slop free.

Included all CNC parts needed for conversion, stock parts used from existing model not included

Original JR CASE INPUT GEAR W/SHAFT , fits CNC Robbe gearbox for Millenium/Dyna-X

Special made TAIL GEAR , fits Robbe CNC gearbox for Millenium/Dyna-X

FOR TREX 500

●Control link x 2
●T type arm x 1
●Collar A x 2(Φ2xΦ3x4mm)
●Collar B x 2(Φ2xΦ3x3mm)
●Collar screw x 4(M2x8mm)
●Linkage ball A(T2.6x3.5) x 1(Φ4.75x8.18mm)
●Bearing MR106ZZ x 2(Φ6xΦ10x3mm)
●Slide shaft x 1(Φ4xΦ7x15.2mm)
●Bearing mount x 1
●Washer x 1(Φ6xΦ7.4x2mm)

fits Raptor 30-50 helis

Tail Servo Holders, to allow Optimal space to mount Trottle and Pitch servos.Anodized in Black, 2 pieces in set, Hardware included

Tap Wrench. Covers 1/16-1/4" (M1-M8) tap sizes. Use in combination with spring-loaded tap guide for accurate tapping on CNC and manual milling machines.

 Instructions:    

• New design High scale telescope strut with rubber wheel
• Hardening Steel Wheel Axle
• Suitable for all DSR-46 Series Retract unit
• High impact Aluminum Alloy
• High precision CNC cutting
• Llight, and more strength.

Specification:    

• Shock Absorber diameter: 11mm
• Shaft Hole diameter: Φ5.5mm
• Weight: 31g (approx.)

Accessories:

• Shock AbsorberX1
• Impact Shaft  X1
• Strut t X1
• Wheel Axle  X 1
• Spring  X 1
• M2X4mm Screw  X 1
• M3 X3mm Screw  X 5
• 45mm Rubber wheel  X 1

 Instructions:    

• New design High scale telescope strut with rubber wheel
• Hardening Steel Wheel Axle
• Suitable for all DSR-46 Series Retract unit
• High impact Aluminum Alloy
• High precision CNC cutting
• Light, and more strength.

Specification:    

• Shock Absorber diameter: 11mm
• Shaft Hole diameter: Φ5.5mm
• Weight: 33g (approx.)

Accessories:

• Shock AbsorberX1
• Impact Shaft  X1
• Strut t  X1
• Wheel Axle  X 1
• Spring  X 1
• M2X4mm Screw  X 1
• M3 X3mm Screw  X 5
• 51mm Rubber wheel  X 1

FEATURES AT-A-GLANCE

    Up to 12-cell Lithium battery (50.4V)
    140A continuous current with 280A surges
    Power and signal for ESCs conveniently located in corners
    12V navigation light power available at each cornerBuilt-in power distribution
    Built-in voltage and current sense
    Redundant power supplies for flight critical components
    Payload connectors with resettable fuses for 5V, 12V, and direct battery power
    Good power and error indicator lights
    Built-in buzzer with volume control
    Connectors for every function of Pixhawk Cube
    Easily accessible PWM voltage level selector (3.3V or 5V)
    Resistant to ground bounce on PWM signal
    Connector-compatible with standard ProfiCNC carrier board
    Connector ports for debugging IO and FMU processors

STANDARD CABLES:

4-pin JST GH
6-pin JST GH
PAYLOAD POWER CABLES:

4-pin Clik-Mate 1.25mm (for 5V payload power)
5-pin Clik-Mate 1.25mm (for 12V payload power)
6-pin Clik-Mate 1.25mm (for battery payload power)

NOTE: Pixhawk 2.1 Cube NOT included.

Thin methanol fuel silicone tube 2,5 x 1,0mm

Can be used in fuel tanks. Very flexible.

Pack of 1 meter

 Instructions:

•   New design High scale Trail Link strut with foamy wheel for DSR-R30 Retract.
•   Hardening Steel Wheel Axle
•   Suitable for all DSR-30 Series Retract unit
•   High impact Aluminum Alloy
•   High precision CNC cutting
•   Light, and more strength.

Specifications:

•   Upper leg diameter: Φ8mm
•   Dimension: 93.5mm Hight without wheel
•   Weight: 14g (approx.)

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V2 version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:
Switch Cap (Fringe Bottom) *8pcs
 

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V2 version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:
Switch Cap (Fringe Bottom) *8pcs
 

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V3+ version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:

• Switch Cap BLACK (Fringe Bottom) 8pcs
• Cap Sticker 8pcs

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V3+ version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:

• Switch Cap BLUE (Fringe Bottom) 8pcs
• Cap Sticker 8pcs

TX Switch Knobs Cap BLACK Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLACK Short V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLUE Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLUE Short V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap ORANGE Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs