eRCmarket

Pinion gear for ALU Gear box 10/12/14/16T

POWERZIP strip, 16mm wide, 1meter long

Power tape, holding power is up to 50 kg!!, Double face transparent silicone tape ( red cover), excellent for installation of wires, wood, fiber, Gyro , Receiver and more..

Its suitable for internal & external use it offers high adhesion to a wide variety of surfaces. It has superior 'wetting out' properties which increase the bonded surface area increasing the strength of the bond. It has excellent ageing properties and is resistant to U.V. light, abrasion, corrosion & moisture.
Service temperature is -30°c - +80°c (continuous)/ +130°c (shorterm).

Pack of  1 Meter long 16mm wide

 

POWERZIP strip, 16mm wide, 1meter long

Power tape, holding power is up to 50 kg!!, Double face transparent silicone tape ( red cover), excellent for installation of wires, wood, fiber, Gyro , Receiver and more..

Its suitable for internal & external use it offers high adhesion to a wide variety of surfaces. It has superior 'wetting out' properties which increase the bonded surface area increasing the strength of the bond. It has excellent ageing properties and is resistant to U.V. light, abrasion, corrosion & moisture.
Service temperature is -30°c - +80°c (continuous)/ +130°c (shorterm).

Pack of  1 Meter long 25mm wide

 

Professional Aerial dedicated HDMI adapter cable

Full compliance with HDMI 1.4 specification design, and we are fully in accordance with the design of the differential signal lines, to achieve maximum signal isolation in the design sequence distribution lines, strong anti-interference, good color reproduction.

Specification:

• Aerial dedicated
• length 18cm
• weight 5 g
• support 1920x1080p
• specification compatible HDMI1.4a

Temperature controlled solder Station , ESD-safe, with digital display of target- and actual temperature, including soldering iron with tip, iron holder and sponge in drawer.
The soldering station  is ideal for hobby, school, workshop, service and lab. The adjustment of temperature is easy with the up-/down-button in 1° and 5°C-steps. The soldering iron will be connected with a 5 poles socket to the station.
 

•   With iron holder and sponge in a drawer.
•   Compact, stable and insulated housing.
•   Station and iron holder can be placed separately.
•   Fast and easy replacement of soldering tip
•   Large LC-display with target- and actual value of temperature.
•   Temperature control with electronic sensor
•   Short heating-up time thanks to a amply designed power supply.
•   Efficient soldering iron for a wide range of application
•   Temperature range from 150 to 450°C (300-850°F)
•   Optical and acoustic error indication in case of malfunction
•   ESD-safe

Technical Specifications
 

•   Input Power: 230V (220-240V), 50Hz
•   Soldering iron power: 48W
•   Fuse: T 1A/250V
•   Temperature range: 150°C-450°C (300-850°F), in 1°C or 5°C steps
•   Display accuracy: 5%
•   LC-Display with 3 1/2 digits
•   Max. Input Power: ca. 90VA
•   Dimension WxHxL: 185x100x150mm
•   Weight: ca. 2.0kg

Contains

•   Solder station  with iron holder and drawer with sponge
•   Solder iron with tip 1,6 mm
•   Color of station plastic can vary

 

 

RCD3015G IS A full remote shutter control. Utilizing the 3 positions Switch on a standard radio control transmitter, users can now choose to take a photo or video while in flight.

RCD3015G is an enhanced version of HDMI to AV interface. Remote controlling of the camera is now possible via the 3 position switch from the radio control transmitter.
e.g. on most Futaba or JR transmitters it is possible to assign the 3 position switch to channel 7 or some spare channel.

RCD3015G senses the position of this switch and either takes a photo or records a video.

With RCD3015G the model flyer has a full control of the camera's operations while in flight. Conserving valuable storage space and battery life.
RCD3015G offers full support for SONY NEX 5N,5R,5T,6R,7N,7R

RCD3015G has been fully optimized to fit the SONY NEX series making installation a breeze

Initial Settings:

•   Set the camera HDMI output to auto resolution mode.
•   Set the video mode to infrared remote control mode.
•   Connect RCD3015G HDMI converter with the camera, connect the servo cable of shutter controlling with the remote control receiver.
•   Initialize the Camera by pressing the shutter once to get the camera out of review mode.
•   Install the optical fiber on RCD3015G converter, stick the other end of the optical fiber over the window of infrared receiver on the camera.

Important Note:

You need to have a transmitter with a 3 position switch. Map this 3 position switch to a spare channel and connect the servo cable from the RCD3015G to this channel. If there is no connection, RCD3015G works only as a HDMI to AV converter.

The control of 3-pos switch:

•   1. Up: Takes a photo (Shutter is pressed)
•   2. Middle:Shutter is off / Recording is off
•   3. Down: Video recording is on.

It is very important that the 3-position switch is set in the middle (neutral) position before you power up your RCD3015G converter. ( Note : RCD3015G powers up when you turn on the camera or power supply of reciever) When the shutter control 3-pos switch is in the middle(stop/neutral) position, the red LED is on constantly. If there is no signal from the receiver, the red LED flashes 4 times per second, it reminds customer to check if the receiver is powered and the transmitter is turned on.

Taking Photos：

Toggle the 3-POS switch from middle position to the up position, the camera will start taking photos until the 3-POS switch is toggled to the middle position. In this mode the red LED flashes 2 times per second.
Recording video:

Toggle the 3-POS switch from the middle position to down position, the camera starts recording a video till the 3-POS switch is toggled to the middle position. Video is saved in this position. In this mode, the RED LED blinks continuously.

Attention:

There must be a 5 second interval between each operation of the 3-POS switch. e.g. Switching from neutral to recording position and then back to neutral (recording stop). Please wait for 5 seconds between each mode change. The 5 second interval is required by the camera firmware. It allows the camera to clear the buffer and safely write the video file to storage. Operating the the 3-POS switch without observing the 5 second gap will cause the camera to hang and can result in corrupt video files.

RCD3015G - Input voltage must not exceed 6 volts. Do not connect a high voltage receiver to RCD3015G. The receiver power supply should be between 4.8V-6V, Operation beyond 6 Volts will result in damage the unit and potentially the camera and voids all warranties.

Compatibility list:

Full support for both of SONY 50i and 60i series.
Fully tested to work with SONY NEX-5, 5N,5R,5T,5TL,6R,7N,7R. Nikon D90,D3X.

Packing List：

• 3015G converter module  1 piece
• Black red yellow AV cable  1 piece
• 60cm long, 0.75mm PMMA optical fiber cable 1 piece (Only 15cm  is required for normal operation)

Prolux Fast Fueller Hand Pump - Black/Blue

Hand Fuel Pump for quick clean and easy fueling. Will fill or drain. Complete with fittings

Funky, Functional and Fast Prolux's latest 'Fast Fueller' hand pump is available in two stylish colour finishes of red and blue.
Special TPR material provides a comfortable feel, while an improved gearmesh and overdrive create the large flow rate of 18cc a second.
The advanced pump unit design is compatible with both glow and gasoline fuels and it comes complete with filter nozzle and silicone fuel tubing.

Specifications:

• Dimensions (approximately): 105mm x 52.5mm x 60mm
• New generation fuel pump with compact size
• Double injection, using TPR material that has a comfortable feel
• Improved gear mesh and make the large flow rate 18cc/sec
• Advanced pump unit design, glow fuels and gasoline are both compatible
• Includes filter fuel nozzle and  silicon fuel tubing

 

Quick, easy and inexpensive propeller balancer.

Perfect for quick, accurate balancing at home or even at the field

Fingertip Propeller Balancer 1 pc.

PROPELLER adaptor, Union type (40mm, M8 )
Fits Shafts of 5mm

Propeller Adapter aluminium shaft 3,0mm & propeller shaft 5,0mm

Weight: 7.6g

Propeller Adapter aluminium shaft 3,175mm & propeller shaft 5.0mm

Weight: 7.6g

Propeller Adapter aluminium shaft 3,175mm & propeller shaft 6,35mm

Weight: 7.6g

Prop adaptor which also act as a Saver. Suiatable for 2.3/3/3.2/4mm shafts

Carbon tube, OD 7mm xID 5mm .Very light and strong. Extremely Straight (made by Arrow Technology) .can be used as a Boom, Support, and more.

Length: 100cm

Purflame  Airbrush Fiberglass Canopy Sky Hero Spy

Be different with our new canopy specially designed for Sky Hero Spy. A whole new look and more visibility for your copter with a cool design at a affordable price. Dont be the same, be different .
Fly it your style.
 
Fusuno canopies are made with highest quality resin and fiberglass material to provide strong but flexible canopies. It helps prevent cracks that is normally seen in other canopies that are using lower quality material. All paints and clear coat are automobile grade provide great look, Great design at bargain price.

With the Flybarless heads, the load on the pushrod become enormous.

We producing 2.6mm hardened pushrods, especially for use with Flybarless heads.

avaliable in 60, 65, 75mm. set of 4.

This combo is a perfect Saving package deal. Included:

1 QAV frame 4 Motors Emax 2206-1900
4 Props HQ 6X4.5
4 ESC simonK or Blheli 12 Amps
1 CC3D controller

Carbon Fiber and aluminum anodized RED/SILVER motor mount
Weight:95gr
Fasteners: Stainless Steel
Size: 250mm diagonally

QQ SUPER Multi-rotor Flight Control Built-in 3-axis Gyroscope for 4 axis 6 axis KK Upgrade

Built-in three-axis gyroscope and three-axis acceleration sensor, support for self-stabilizing, super stable flight performance

Support the general receiver, FUTABA S.BUS receiver, DSM2, DSMX 11MS, DSMX 22MS receiver, simplifying connection installation more convenient, ultra-bright LED

Product Specifications:

• Processor:32BIT ARM
• Voltage:3.6V-8.4V
• Current:60mA*
• Output rate:360Hz
• Dimension(L-W-H):43X29X13MM
• Weight:13g
  

Not include receiver and satelite

Package includes:

• 1xQQ super multi-rotor flight controller
• 1x Chinese Manual
• 1xEnglish Manual

Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

• Used for a drone
• Suit for a tube which dia is 15-30mm
• Waterproof and 3 working modes
• 2x2032 battery
• Product weight:22g
• Cool design suit for riding at night

Material:

• 100% nature friendly grade silicone,non-toxic
• RED Aluminum anodized

A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

Specification:

• Light Source Type    LED
• Light Source Color    7500-8500K
• Lumens (Max)    20 LM

• Housing Color: Red, Light color- Red
  
• Material    Aluminum Alloy + Plastic

Construction:

• Water Resistant    Yes
• Electronic Components
• Output Current    60 mA
• Flashlights
• Flashlight Modes :2, Hi > Strobe
• Switch Type    Forward Click

Power & Batteries:

• Batteries Included    Yes
• Battery Form Factor    CR2032
• Estimated Usage Time  3-6 hours

Dimensions:

• Depth    34.6 mm
• Height    112 mm
• Width    27.6 mm
• Product Weight    28 g
  

A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

Specification:

• Light Source Type    LED
• Light Source Color    7500-8500K
• Lumens (Max)    20 LM

• Housing Color:black, Light color- White
• Material    Aluminum Alloy + Plastic

Specification:

• Light Source Type    LED
• Light Source Color    7500-8500K
• Lumens (Max)    20 LM

Construction:

• Water Resistant    Yes
• Electronic Components
• Output Current    60 mA
• Flashlights
• Flashlight Modes    Hi > Strobe
• Mode Count    2
• Mode Memory    No
• Switch Placement    Head
• Switch Type    Forward Clicky

Power & Batteries:

• Batteries Included    Yes
• Battery Form Factor    CR2032
• Estimated Usage Time    3-6 hours

Dimensions

• Depth    34.6 mm
• Height    112 mm
• Width    27.6 mm
• Product Weight    28 g
  

This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

Light Color: Red
Case : Silicone red
2 modes: Flash, Constant light
Light visible till 300 Meters
Power supply: 2x CR2032 per light (incl.)
Weight: ±20g/light

This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

Light Color: Red
Case : Silicone red
2 modes: Flash, Constant light
Light visible till 300 Meters
Power supply: 2x CR2032 per light (incl.)
Weight: ±20g/light

Our RTF Drones have been designed to meet RPAS regulations. Fits DGAC group S1-S2-S3

Complete ready to fly foldable carbon frame drone with Flight controller of your choice.
Delivery time is vary depends on the complexity , and may take 3 to 4 weeks.

• Maximum flying weight 3,8 kg, A+3 series
• Configuration - Quadcopter
• Number of motors: 4 (optional to 8)
• Diameter from motor to motor 600-650
• Prop size 11-12"
• Operating voltage 4-6s LIPO
• Standard Flight Controller (Choice of electronics of Multiwii, Naza, Wookong, ZeroUAV)
• Full carbon platform.

Cameras to be used: Go pro
Payload: up to 0.5kg ( not including the machine)
Wind resistance:16KNT
Operation: 1 man

Included:

• RTF machine, Assembled, tuned and tested
• Camera mount :Go pro compatible
• Video transmitter system 25mw
• Spyro Antenna
• Radio 8ch, with telemetry

Needed to complete
Charger

Optional- Waypoints, Parachute, Led lamps, and more.

Prices from 3699 eur- for complete quote, contact us directly by email sales@ercmarket.com

Radial ball bearing 6x10x2.5, ABEC5, made in Japan

Radial ball bearing 6x10x3

Radial ball bearing 6x12x4

Radial ball bearing 6x13x5

These carbon fibre tail fins for the RAPTOR 60-90 are available in solid and cut-out 3D styles.
CNC machined from highest quality multi laminated carbon composite. Lightweight and strong!

Broke your car, need replacement of parts, maintenance? assembly?

We can help, now we offering building and repair service for Cars, made by experts.

Our team will be happy to assist you with any need.

Price is based on Hourly work. Estimation of service possible in certain cases in advance

NEW - NEON COLOURED !!

Made from the same low friction polymer resin as our regular "Rocket" ball links but now in high visibility neon orange, green and yellow.
Suitable for use on 2.0 & 3 mm pushrods but EASILY can be re-drilled to suit up to a 3mm thread if required.

Norlam Standard length shank measuring 22mm from ball centre to the end and are suitable for fitting to 3/16" (4.76mm) control balls.

Shorter are 14mm* good for Servos for tail and other short applications

Available in standard or short body versions.

Supplied in packs of 10

Receiver battery connector cable Graupner 30cm

Specifications:

• Thickess  0,5 mm²
• Lenght 300 mm,
• lose BLUE-LINE-SILIKON - Made in Germany -

Replacement boom 23cm
Size: 230 x 15 x 15mm
Thickness: 0.6-0.7mm
Weight: 24.5g

Replacement boom 33cm
Size: 230 x 15 x 15mm
Thickness: 0.6-0.7mm
Weight: 24.5

Replacement HSS bits for metric hex drivers! The bits made from HSS steel ,2 possibilieies:
1- has the ultra-hardened precision type hex end
2- has the hardest ball-hex ends we have seen!

1.5, 2, 2.5 and 3mm sizes.

Robbe 60-90 fin Horizontal