0 €0.00
CUAV
producer of Autopilots
CUAV X7 PRO Core Flight Controller Carried Board for FPV Drone Quad-copter Helicopter
| X7 PRO is an advanced autopilot independently designed by CUAV. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. Compared with the previous flight controller, it has better performance and more reliability. This board can run ArduPilot firmware perfectly. the CUAV x7 +pro is ideal for industrial drones. Specifications:
|
€860.00
€710.74 Ex VAT
CUAV X7+ Flight Controller + NEO 3 GNSS U-blox M9N GPS Module For Flight Controller
| CUAV X7&X7 Pro is an advanced autopilot independently designed by CUAV. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. It has better performance and more reliability. This board can run ArduPilot firmware perfectly, and it will also be compatible with PX4 firmware. This NEO 3 GPS is manufactured by CUAV. It integrates Ublox M9N, IST8310, three-color LED lights and safety switches, and is compatible with CUAV and Pixhawk standard controllers. CUAV NEO 3 GPS Specifications
|
€469.99
€388.42 Ex VAT
CUAV X7+ Flight Controller + NEO 3 Pro GNSS U-blox M9N GPS Module For Flight Controller
| CUAV X7&X7 Pro is an advanced autopilot independently designed by CUAV. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. It has better performance and more reliability. This board can run ArduPilot firmware perfectly, and it will also be compatible with PX4 firmware. Features:
|
€554.99
€458.67 Ex VAT
CUAV X7+ Flight Controller Autopilot For PX4&APM Drone UAV
| X7+ autopilot uses STM32H743 series processors CPU, Cortex-M7 core (with double precision Floating-Point Unit). It makes operating frequency increase to 480Mhz, 2MB Flash，1MB RAM，Meet the higher computing needs of flight controllers Compared with the STM32F7 product line, the dynamic power consumption efficiency is doubled. The sensor is one of the important indicators to evaluate the flight controller. This time, we have added the ICM-42688-P sensor. Compared with the traditional consumer IMU, the noise figure of ICM-42688-P is reduced by 40%, and the temperature stability is improved 2 times, so as to ensure the highest accuracy measurement in the case of temperature changes. Sensor Redundancy Design Built-in three sets of accelerometers and gyroscopes, the flight controller monitors the data of multiple sensors in real time, and executes redundant switching immediately in case of failure to improve flight safety and stability. Temperature Compensation System The built-in high-precision sensor temperature compensation system makes the sensor work at a constant temperature, ensuring that the sensor can operate stably with high precision and sensitivity in high and low temperature environments. CORE Separate Design The X7+ flight controller integrates the main MCU and IMU into the CORE module and can be sold separately. Users can design the baseboard according to the UAV structure to meet the individual needs of users, or purchase our CAN PDB baseboard for use. The X7+ CORE interface is compatible with X7, X7 Pro, and V5+ flight controller CORE. Better CUAV Patented Shock Absorption System After dozens of iterations, hundreds of shock-absorbing materials have been tested and verified, computer model analysis and thousands of flight tests, so improve the shock absorption to a further level Standard Pack Digital Power Module Standard package include UAVCAN protocol digital power detection module, using CUAV independent R&D ITT algorithm, accurate measurement of UAV real-time voltage and current, making flight time estimation more reliable. Firmware: Note:X7+ flight controller is compatible with ArduPilot 4.10/ PX4 1.12.3 or higher firmware. Copter/Plane, Support all models: Copter/Plane/ Helicopter/VTOL/unmanned vehicle/ Rover, etc. Specifications Main FMU Processor: STM32H743 On-board sensors: Accelerometer/Gyroscope: ICM-42688-P(X7:BMI088) Accelerometer/Gyroscope: ICM-20689 Accelerometer/Gyroscope: ICM-20689(X7:ICM-20649) Magnetometer: RM3100 Barometer: MS5611*2 Interfaces: 14 PWM outputs （12 supports Dshot） Support multiple RC inputs (SBUs/CPPM/DSM) Analogue/ PWM RSSI input 2 GPS ports(GPS and UART4 ports) 6 i2c buses(Four i2c dedicated ports) 2 CAN bus ports 2 Power ports(Power A is common adc interface, Power C is uavcan battery interface) 1 ADC intput 1 USB ports Power System: Power: 4.5~5.4V USB Input: 4.75~5.25V Servo Rail Input: 0~10V Weight and Dimensions: Weight: 101 g Other Characteristics: Operating temperature: -20 ~ 85°c Three imus Supports temperature compensation Internal shock absorption x7 plus pinouts CUAV X7+ Features: 1–Built-in shock absorption 2–3 sets of Imus support intelligent failover 3–Support temperature compensation 4–Support CAN ammeter 5–Modular design, support custom baseboard |
€399.00
€329.75 Ex VAT
CUAV X7+ Pro Flight Controller + NEO 3 GNSS U-blox M9N GPS Module For Flight Controller
| CUAV X7&X7 Pro is an advanced autopilot independently designed by CUAV. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. It has better performance and more reliability. This board can run ArduPilot firmware perfectly, and it will also be compatible with PX4 firmware. This NEO 3 GPS is manufactured by CUAV. It integrates Ublox M9N, IST8310, three-color LED lights and safety switches, and is compatible with CUAV and Pixhawk standard controllers. CUAV NEO 3 GPS Specifications
|
€1027.00
€848.76 Ex VAT
CUAV X7+ Pro Industrial ADIS16470 Autopilot ARM STM32H7
| X7+ Pro is an advanced autopilot independently designed by CUAV. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. Compared with the previous flight controller,it has better performance and more reliability. This board can run ArduPilot firmware perfectly. X7+ Pro is ideal for industrial drones. Faster than ever CUAV X7+ Pro autopilot use STM32H7 series processors, CPU operating frequency increased to 480Mhz, storage 1024K, FLASH 2048K, has a faster processor and larger storage, and uses 512K EEPROM, can expand waypoints to 2048, Bring more imagination to flight applications Built-in shock absorption design CUAV X7+ Pro flight controllers have a built-in and reliable CUAV patented shock absorption system, making them fearless of flight jitter! Adapt to harsh environment CUAV X7+ Pro autopilot adopts numerous car-level chips and has a built-in high-precision sensor temperature compensation system, which makes the sensor work at a constant temperature to ensure that the sensor can operate with high accuracy and high sensitivity in high and low temperature environments. Always stable Invensense + Bosch + ADI + TE series sensors are used, which have lower noise and stronger anti-shock and vibration performance. With the industrial-grade compass RM3100, the flight stability and anti-interference performance have brought a qualitative improvement Difference between X7+ Pro and X7+? X7+ Pro replaces the ICM-20689 chip on the X7+ with a high-end ADI16470 chip. Because of its excellent gyro and acceleration drift performance, it has been used in some cutting-edge aerospace projects in the past. This time, we introduced it into the open source flight control, which is integrated into the IMU with triple redundancy and exerts excellent performance For the regular version, please check CUAV X7+ Flight Controller ADIS16470 sensor! X7+ Pro and X7+ are only different from sensors: X7+ pro uses ADI16470 chip instead of ICM-20689 And the front logo has more Pro words, other appearance and size are the same as X7+. Dual platform compatible CUAV X7+ Pro Supports the current mainstream PX4 (PX4 is being adapted) and Ardupilot two open source platform firmware to meet the needs of different users. CUAV X7 Pro Flight Controller quality CUAV deeply cooperated with the APM & PX4 team to complete the hardware design and software adaptation of the CUAV X7 series, and was produced and tested by the CUAV smart factory. Each autopilot was used for independent I / O through the CUAV AATS system Connectivity and sensor stability test to ensure the stability and reliability of the autopilot. Other characteristics Internal shock absorption Modular design, can be DIY carrier board Support USB_HS, download logs faster Support more dshot output Support IMU heating, make the sensor work better Dedicated uavcan battery port 3 sets of IMU sensors High-precision industrial sensor(ADIS16470+RM3100) |
€899.00
€742.98 Ex VAT
CUAV X7+PRO Flight Controller + NEO 3 Pro GNSS U-blox M9N GPS Module For Flight Controller
| CUAV X7&X7 Pro is an advanced autopilot independently designed by CUAV. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. It has better performance and more reliability. This board can run ArduPilot firmware perfectly, and it will also be compatible with PX4 firmware. NEO 3Pro is a DroneCan GPS receiver produced by CUAV. It integrates UBLOX M9N, STM32F4 MCU, RM3100 compass, three-color LED light and safety switch. CUAV NEO 3 Pro specifications:
|
€1110.00
€917.36 Ex VAT
CUAV XBEE Over the horizon data transmission module
| CUAV XBEE Radio is a high-power, high-speed, high-reception sensitivity data transmission module It has a built-in S3B RF module from the United States DIGI company, transmitting power up to 250mW, ISM 900MHZ legal frequency, supporting a variety of advanced network options and topology modes The CUAV XBEE Radio module offers an unprecedented range of low-cost wireless data solutions. This module is easy to use and is especially suitable for unmanned unit networks and point-to-point over-the-horizon transmission, providing stable, critical data transmission between drones and equipment. Their small size saves valuable on-board space. |
€187.99
€155.36 Ex VAT
