Connectors & Cables

MPA is a Multi-Port Safe Parallel Module for safely interconnecting up to 4 Lipos with same-cell-count batteries in parallel
 

• Balance Output Cable: 18AWG silicon cable
• Current: Support MAX. 35A charge current
• Support up to 4 packs 2S-8S balance charge.

Features:

• Supports up to four packs of the same type, same cells 2-8S battery pack.
• Balanced port output line with 18AWG multi-strand silicone line.
• Equipped with safety protection
• High-quality gold-plated connectors.
• Thicken PCB copper foil, allow security using 35A charging current
• Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.

Package Included:
1x Parallel Charging Board

MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.
 
Spcifications:
support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s);
supports 40A max charge/discharge rate;
every port reverse polarity fuse protection of main battery wires;
every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators;
supports non-balanced charge of up to two 1s LiPos used with "indoor models";
supports 1 RX and 1 TX NiCd/NiMH battery pack
Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring.
 
Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.

Servo Connector - Futaba Female, Blue Line, Made in Germany for Construction,10 pcs

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

Servo Connector - Futaba Male (Pin), Blue Line, Made in Germany for Construction,10 pcs

For 0.2-1.0mm2 wires.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

JST-SH Servo Plug Set for JR Servo side terminals .This a set of 10 Housings (plugs). Comes complete with 10 housings & 30 gold pins.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany

Servo Connector - JR Female, Blue Line, Made in Germany for Construction,10 pcs

For 0.2-0.5mm2 wires.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

Servo Connector - JR Male (Pin), Blue Line, Made in Germany for Construction, Set of 10

For 0.2-1.0mm2 wires.

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

This product is Made in Germany

This a set of 10 Housings (plugs). Comes complete with 10 housings & 30 gold pins.

JST-SH Servo Plug Set for JR terminals. These gold plated JST-SH plug kits are a must have for any RC enthusiast, there will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany   

This a set of 10 Housings Male (plugs). Comes complete with 10 housings & 30 gold pins.

JST-SH Servo Plug Set for Futaba terminals. These gold plated JST-SH plug kits are a must have for any RC enthusiast, there will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany

This a set of 10 Housings Male. Set of 10 connectors.

Servo Plug Set for Futaba terminals. These gold plated JST-SH plug kits are a must have for any RC enthusiast, there will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts.

Great for servo replacements or for making your own servo extensions.

This product is Made in Germany

Set of 10 pcs

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of Male and Female connectors provided which can be used to create/repair Servo leads and Extensions.

Great for servo replacements or for making your own servo extensions.

This a set of 10 Sets of Housings (plugs). Each set comes with 10 x Male (2 housings, and 10 x Female) and Comes complete with 30 gold Male and Female pins.

So you will get a total of 30 housings, and 60 Pins (30M+30F). You will need your own Crimp tool (can be purchased separately)

This product is Made in Germany

This battery plug will allow you to charge your Typhoon H battery with any Lipo Charger,
It comes with wires and balancer separately. connecting multiple wires is also possible, this way you can charge multiple lipos at the time