AVIZAR

GT Power CCPM Servo Consistency Master is a very handy servo driver/tester that can test the consistency and set the centering for up to 3 servos simultaneously.

This is great for anyone who is setting up RC airplane, car, or CCPM 3D helicopter and would like to see if their servos are actually working or compare the response time of each servo before installing them in your model. Additionally, you can set your servo into neutral/center mode without having a Transmitter/Receiver.

There are 3 available test modes: Manual Mode, Neutral Mode, Automatic "window wiper" Mode

You can also connect 1-3 ESC to test and compare their reaction time respectivel

The device also can be used as a signal generator for electric speed controller (ESC). With it, you can test your motor system without using a transmitter and receiver

36 Bright white circle LED 2W DC12V. 140-160LM (1pc)

Specification:

• Beam angle: 120°
• Power consumption： 1.7W
• Voltage： DC 12V
• Lumens: 140-160LM
• SMD : 3014 (36 LED)
• Size: 30 (dia) x 41mm (total lenght)

Material:

• Composite

The mark 4 freestyle frame is a lightweight frame with loads of room to make installation of your electronics super easy.

6 inch configuration
Super lightweight Freestyle frame.
Beautiful appearance design , durable in crashing.
Quick maintenance Arms and replacement of equipment.
25mm standoffs for better height and CG relation,Ample space for electronic installation.
Alu6061 Standoff New , Strengthen the hardness.
There are 30.5*30.5 and 20*20 flight control holes , Stack can fit in the center or the rear.
High quality 3K twill carbon fiber plate, high precision CNC processing.
YFS screw, 12.9 grade strength, non-slip teeth, anti-rust,Durable steel hardware.

IF chosen as Combo, you will be delivered the following

• Frame kit

Combo will include :

• 4 Motors  2206
• Frame kit
  
• 4 esc 35 amps
• power distribution board
• Lipo 4s 1300-1800
• Flight controller spacers
• propellers

Glow plug SE Booster Cord full Set

Glow Starter with Meter for Sub-C Battery (Battery not included)

This is a glow starter with aluminum case suitable for most methanol/nitro glow engines.

Specs:

• Battery Size: Sub-C/SC NiMH (sold separately)
• Length (total): 148mm
• Diameter: 26.5mm
• Weight: 61.5g (without battery)

Not included - Sold separately:

• Sub-C NiMH battery cell
• Charger

GoPro Hero 3 Adapter Cable for FPV Video Tx

• 10 Pin Gopro 3 usb audio video cable with 2 connectors
• 20 cm Cable length
• Only 5g in weight
• Easy to install with most FPV Video Transmitters

• Black : Ground (GND)
• Red : Audio Out
• White : Video Out

This is a Do-it-yourself sensor kit to replace any needed Magnetic sensor.
the kit comes with clear instruction how to solder the wires, and place it best way, you may also print your 3D mount if needed, or use any PCB isolating material to make it yourself.

Kit including wire connector 30cm, sensor and heatshrink set.

Black Cover Case Shell for GPS Antenna Neo6m 6H MTK Ublox

Perfect for Open source Self kits as MultiWii/Ardu pilot, etc.

H150 RC Helicopter Parts MIni 150mm 4-Axis Carbon Fiber Frame kit fpv RACER

• Specification:
• Upper board: 1.5mm
• Height: 30mm
• Material: carbon fiber
• Wheelbase : 150mm
• Flight controller install hole distance : 30x30mm
• Motor mount bolt holes: 8/12mm
• Support 3 inch propeller (Max.)
• Recommend motor: 1104, 1306

 

Hardcase Rucksack with insert foam for Yuneec Typhoon H The stable protection for your Typhoon H. You keep certainly everything what on the way need and, besides, still comfortably on the back to carry. High-quality materials protect your Typhoon H against rough damages. However, all Inlays of every Typhoon H fit here there are two different versions. Version is laid out to this Hardcase for the rounded Inlay. But also the square version fits, here only little bit bigger columns exist. Specification:

• Hardshell Backpack for Yuneec Typhoon H480
• Good quality, durable, waterproof and shock-proof
• Convenient and comfortable to take the case to outdoor or travelling
• Insert foam for Typhoon H480 is included
• Material: PC + Nylon
• Net wight: 2.1kg
• Backpack size: 35x54x46cm
• Color: gray silver

*illustrated Typhoon H incl. accessories are not a component of the product.

Tired of Stock switch and cap color? Time to refresh your Futaba TX
New V3+ version, comes with metallic cap stickers
Gives you more options to customize your Transmitter

Included:

• Switch Cap (Flat Bottom) *8pcs
• Cap Sticker *8pcs

FPV HD Color Camera Module 600TVL 120 Degree Wide Angle

• Sensor: 1/4 inch HD Color CMOS
• Format: PAL
• Effective pixel: PAL=720(H)*576(V)
• Definition: 600TVL Lines
• Minimum brightness: 0.01lux
• View angle: 120degree
• AV output: 1.0Vp-p/75Ω
• Power consumption: 95mA+/-10%
• SNR: >50DB
• Electronic shutter: (P)1/50-1/10000s
• Work voltage: DC5-15V +/-10%
• Dimension: 21*21*28mm
• Work environment: 0℃~45℃ RH95%  Max
• Weight: 15g
• Lens:2.5MM color full glass 120 degrees wide angle lens, M12 thread.

Included
1 x 1/4 CMOS HD Color Camera Module

Specifications:

• Size: 81 * 40 * 25mm
• Net Weight: 29g
• Color: Purple
• Holder material: Metal

Features:

• TANK capacity: 80cc
• This is a replacement Header tank with Metal Holder.
• Great value and great looking CNC header tank support.

Package Included:

• 1 x Header Tank
• 1 x Holder
• Color of holder is purple

Made from Hardened metal, black color, Pack of 10

Made from Hardened metal, black color, Pack of 10

Headless Stainless Steel Flat-end Set Screws M3X5 (10pcs)

Made from Hardened metal, black color, Pack of 10

Headless Stainless Steel Flat-end Set Screws M3X6 (10pcs)

Made from Hardened metal, black color, Pack of 10

Headless Stainless Steel Flat-end Set Screws M3X8 (10pcs)

Made from Hardened metal, black color, Pack of 10

Headless Stainless Steel Flat-end Set Screws M4X6 (10pcs)

Made from Hardened metal, black color, Pack of 10

Headless Stainless Steel Flat-end Set Screws M4X8 (10pcs)

Made from Hardened metal, black color, Pack of 10

Extremely flexible, even after folded it always returns to its original shape.
Dimensions 450 x 300 mm.
Make your soldering and repair work easy with this multi-functional mat.

• ESD-Safe
• Heat-resistant up to 500°C
• Pliable, returns to its original shape
• 3x Small storage boxes and 3x magnetic areas
• Screw compartments and tool holders
• Anti-skid and anti-glue

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter,  Black

Size- 1.6 mm before Shrinking, perfect to use on Wires with total diameter of 1mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Red x 1M

Size- 10.0mm before Shrinking, perfect to use on Wires with total diameter of 5-8 mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Set including  Black

Size- 2.4mm before Shrinking, perfect to use on Wires with total diameter of 1-2mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Set including  Black

this HeatShrink is with glue.

Size- 2.4mm before Shrinking, perfect to use on Wires with total diameter of 1-2mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Red x 1M

Size- 3.0mm before Shrinking, perfect to use on Wires with total diameter of 1.5-2.5 mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Red x 1M, Black x 1M

Size- 3.2mm before Shrinking, perfect to use on Wires with total diameter of 1.5-3 mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Red x 1M, Black x 1M

Size- 4.0mm before Shrinking, perfect to use on Wires with total diameter of 2-3.5 mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Red x 1M

Size- 4.8mm before Shrinking, perfect to use on Wires with total diameter of 2.2-4 mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Red x 1M, Black x 1M

Size- 6.0mm before Shrinking, perfect to use on Wires with total diameter of 3-5.2 mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Set including Red x 1M, and Black x 1M

Size- 6.4mm before Shrinking, perfect to use on Wires with total diameter of 2.2-5mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

This is a single wall Heat Shrink tube, means No glue, or other isolation. If needed: We also selling Dual wall - With glue.

Price per 1meter, Set including Red x 1M, and Black x 1M

Size- 9.0mm before Shrinking, perfect to use on Wires with total diameter of 4.5-8mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Transparent milky clear

Size- 12.7 mm before Shrinking, perfect to use on Wires with total diameter of 6.5-12mm

Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved. RoHS Compliant. made in Germany, Shrink up Ratio to 50% ( 2:1) of its size. excellent for any electric application.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Transparent milky clear

Size- 29 mm before Shrinking, perfect to use on Wires with total diameter of 14-28mm

Flexible, DUAL WALL,  3:1 ratio, UL approved. RoHS Compliant. made in Germany, Shrink up Ratio of ( 3:1) of its size. excellent for any electric application.
Thick adhesive-lined heat shrink tubing provides a tough and long-lasting sealed system against vibrations, water, moisture and more.

Glue is melted at 100C, isolating perfectly your connections. Adding a safetly level.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Set including Red x 1M, and Black x 1M

Size- 3.2mm before Shrinking, perfect to use on Wires with total diameter of 1-2.5mm

Flexible, DUAL WALL,  3:1 ratio, UL approved. RoHS Compliant. made in Germany, Shrink up Ratio of ( 3:1) of its size. excellent for any electric application.
Thick adhesive-lined heat shrink tubing provides a tough and long-lasting sealed system against vibrations, water, moisture and more.

Glue is melted at 100C, isolating perfectly your connections. Adding a safetly level.

High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminals and electronic and mechanical components. High strength and resilience.

Price per 1meter, Set including Red x 1M, and Black x 1M

Size- 4.8mm before Shrinking, perfect to use on Wires with total diameter of 1.6-4mm