AVIZAR

The Extron 10-port connector shape allows you to mold "handles" to the ten most popular model building connectors.

The Extron connector mold is made of CNC machined aluminum for durability. The application is very easy (see pictures). All you need is a standard hot glue gun.

1. moisten the inside of the plug form with a commercially available release agent, e.g. wax spray
2. insert plug or socket with cable already soldered into the mould and close with the upper part of the mould
3. press hot glue into the central hole until it swells out at the side outlet holes
4. after a short cooling down, remove the plug from the mould and remove the sprue with a sharp knife - that's it!

The Extron connector shape is suitable for:

• T connector (Deans)
• T socket (Deans)
• MPX 6-pin plug
• MPX 6-pin socket
• MPX 8-pin plug
• MPX 8-pin socket
• XT-60 connector
• XT-60 socket
• XT-90 connector
• XT-90 socket

EZ Pushrod Connector Linkage Stopper 1.3mm, set of 10

EZ Pushrod Connector Linkage Stopper 2mm, set of 10

Fabric Heat Shrink Braided Sleeve is an excellent choice that combines the protection of braided sleeve with the conforming and bundling abilities of heat shrink tubing.

2:1 Fabric Heat Shrink Braided Sleeve consists of polyester multi filament and special modified polyolefin monofilament, it will shrink when expose to heat source, this unique woven construction makes it extremely flexible, easy to install on the hoses with irregular shapes. It is suitable used in rough environments, provides excellent abrasion resistance and noise reduction. Its woven material provides protection from cuts and chafing, as well as temperature resistance and vibration and noise suppression. An excellent choice for automotive as well as industrial applications, this product protects, conforms and looks great.

Woven design provides excellent abrasion resistance. Great for plastic pipes, rubber hoses, and cable bundles

Shrinks to 1/2 of the original diameter to conform to oddly shaped
objects, and provides secure termination of wire loom / braided sleeve
projects

Easily cuts with scissors without fraying for easy preparation

• Diameter before Shrink 10mm, best to use on 5-9mm diameter applications
• Shrink Rate 2:1
• Length 1m

Fabric Heat Shrink Braided Sleeve is an excellent choice that combines the protection of braided sleeve with the conforming and bundling abilities of heat shrink tubing.

2:1 Fabric Heat Shrink Braided Sleeve consists of polyester multi filament and special modified polyolefin monofilament, it will shrink when expose to heat source, this unique woven construction makes it extremely flexible, easy to install on the hoses with irregular shapes. It is suitable used in rough environments, provides excellent abrasion resistance and noise reduction. Its woven material provides protection from cuts and chafing, as well as temperature resistance and vibration and noise suppression. An excellent choice for automotive as well as industrial applications, this product protects, conforms and looks great.

Woven design provides excellent abrasion resistance. Great for plastic pipes, rubber hoses, and cable bundles

Shrinks to 1/2 of the original diameter to conform to oddly shaped
objects, and provides secure termination of wire loom / braided sleeve
projects

Easily cuts with scissors without fraying for easy preparation

• Diameter before Shrink 8mm, best to use on 3-7mm diameter applications
• Shrink Rate 2:1
• Length 1m

390* Versatile FPV Pan module + Tilt Module Includes: Pan Module + Pre-built Tilt Module, 1PCS Heavy Duty Titanize Metal Digital Servo, and 1PCS 17g servo

•   Servo Pulse width range: 1000-2000
•   Pan moving range: 3900-4000  (Full range)
•   Tilt moving range: 600-900 (Full range)
•   Control angle may be subject to your equipment wires. Please check carefully before flight to prevent binding.
•   Compatible with Gopro2/Gopro3/Gopro water housing/ General FPV cameras

Camera is not included

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

This product is made of the high-grade material with strong tension, which makes it more durable and eco-friendly. The safest way to charge and store your lipo batteries and protect your workshop, family and home from the hazard of lipo

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

Flybarless head Kit, COMPLETE assembly, for most 500-550 size helicopters, 10mm shaft, With Microbeast Plus

Head is full CNC , pre-assembled.

Microbeast +

Swashplate itself and main shaft are not included

Flybarless Combo Microbeast Nano and head 500-550 size 10mm

Included:

Flybarless head 500-550 size, 10mm, complete(no swash)

Microbeast Nano Flybarless controller

Foam Blade Holder For all helicopters 550-700 size. made from hard foam, very stable support for blades

Set of 1 holder.

Foam Blade Holder For all helicopters 600-700 size. made from hard foam, very stable support for blades

Set of 1 holder.

FORK LEVER 2-ARM 24/30MM Futaba

Specifications:

• Double fork servo lever with precise teeth (variant)
• Gap servo driven ball center to 24mm / 30mm.
• Fork opening 5 mm. 2.2 g weight.
• Supplied with built-in ball joints
• The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp rudder.
• The new design of our double fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The redesign of our fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The execution of a fork lever effectively prevents misjudged the servo drive output.
• The servo gear will last longer.
• Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
• At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
• Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
• The result is a high strength component which need not fear comparison with Duralaluminium.
• However, it is lighter and vibration resistant. All servo lever are manufactured in Germany using the latest CNC machines.

 

 

This power distribution board is specially designed for multirotors, It makes the wiring of your multirotor ESC's neater and more secure.
This is the very latest version with a 2 BEC's fitted, one is a 12V the other is a variable 5v which is very handy.
The latest CC3D power distribution board with dual BEC output 3A 5V and 12V
The hole and size is same as CC3D flight control board Control switch with LED

Input voltage 2-6S weight:5.1G
Size:36*36 Pitch :30.5*30.5
Only work with above 4S battery
Package Include: 1 x power board

2806.5 1300Kv is an affordable motor for 7"-10" long range copters. The motor bell has small protrusions on the top to reduce the chance of propeller slippage. They use 20cm long 18AWG cables.

Key Features

• Size: 2806.5
• Kv: 1300
• Weight: 57g (including cable)
• Dimensions: 34.5*20.5mm
• Mounting holes: 19mm M3
• Cables: 200mm 18AWG
• Configuration: 12N14P

Package Includes

• 1x Motor
• 1x Screw Set

Light your Racer. Fits perfectly The new Sky hero Anakin ( you need 2 leds ) and many other quads. Make yours glowing in the dark.

Specs:

• 3 x 3528 LED's on board, means a lot of Light
• Input: 3-4s lipo
• Weight: 0.7gr
• Size: 26 x 7 x 3. m
• Availiable colors: Red / Green / Blue

Pre-soldered 20cm wire

Set inclusive of 1 led. double side sticker for easier attachment is included.

Light your Racer. Fits perfectly any racers, helis, airplaines.Make yours glowing in the dark.

Specs:

• 6 x5730 LED's on board, means a lot of Light
• Input: 3-4s lipo
• Weight: 1.5 gr
• Size: 50 x 9 x 2.5mm
• Color: Red 

Set inclusive of 1 led board
Double side sticker for easier attachment is included.

Want to be able to mount a small display onto your radio transmitter ? , now you can with our Carbon Fiber FPV monitor mount

• 7-8 inch FPV Monitor Mount to Futaba/JR/other Transmitters
• You can mount your FPV monitor to your transmitter using this monitor mount.
• Suitable for 7-8 inch monitors:
• Compatible transmitter type: Transmitters with metal bar type handle. (like Futaba 9C, 10C, JR 9-ch, etc. )

* This monitor mount only suits for transmitters with thin metal bar type handle as shown on below picture.

3m branded foam landing feets in a pack of 4 pieces. perfect to protect your mini quad.

Set including 4 pcs

Colors: Black, Brown ,Orange

•   Combo with Pan/Tilt which is operated with 2 per-installed servos (Controllable).
•   High Definition.
•   Light Weight ~56g with Pan/Tilt.
•   Controllable angle.
•   Suitable for FPV use such as R/C UAV, Quad, Helicopter and etc.

Further Information:

•   Image Frame Number 25 Frames
•   Lowest Lighting: 2 LUX /F1.2 (without infrared lamp)
•   Sound without microphone
•   Supply Current: 80mA
•   Output Video Range: 1Vp-p
•   Output Video Impedance: 75 Ω
•   Output Audio Range: At maximum to3Vp-p
•   Output Audio Impedance: 10K Q
•   Waterproof State: Not available to rain proof

Breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is DTR. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

There are pros and cons to the FTDI Cable vs the FTDI Basic. This board has TX and RX LEDs that allow you to actually see serial traffic on the LEDs to verify if the board is working, but this board requires a miniB cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.

Fuel Line set , INCLUDING FILLER HOSE, AND FUEL TANK SET.

Set to use on car, heli, airplane and more.

Fuel line retaining clips, suits silicone fuel tubing with an O/D of 5mm.

set of 2

Fuel line retaining clips, suits silicone fuel tubing with an O/D of 6mm.

set of 2

The FunTech HN-55 Type 3D muffler can be used with 50-55 class helicopter engine, designed to maintain the torque and rotational speed of the engine for those who wants to have very consistent and high speed especially for a 3D flight.

Fits OS-YS 50-55

Funtech Muffler O-Ring Viton for mufflers 22mm

Set of 2

FUSION PROPELLER (2PCS)

Designed to refresh your 4SG in nice cool outlook! in carbon BLACK

Carbon Fiber Protection Sticker with Screen Protector

Usage: For Futaba T14SG TX not included, color on photo is representative- real color as described

Feature:

Well protected your transmitter,prevent it from being scratched

Colorful and shiny sticker,make you transmitter more beautiful

Make your TX look different

Designed to refresh your 4SG in nice cool outlook! in carbon Carbon BLUE COLOR

Carbon Fiber Protection Sticker with Screen Protector

Usage: For Futaba T14SG TX not included, color on photo is representative- real color as described

Feature:

Well protected your transmitter,prevent it from being scratched

Colorful and shiny sticker,make you transmitter more beautiful

Make your TX look different

Designed to refresh your 4SG in nice cool outlook! in carbon GREEN

Carbon Fiber Protection Sticker with Screen Protector

Usage: For Futaba T14SG TX not included, color on photo is representative- real color as described

Feature:

Well protected your transmitter,prevent it from being scratched

Colorful and shiny sticker,make you transmitter more beautiful

Make your TX look different

Designed to refresh your 18SZ in nice cool outlook! in carbon BLACK, Image of TX is for demo purposes, the color is BLACK CArbon

Carbon Fiber Protection Sticker with Screen Protector

Usage: For Futaba T18sz, TX not included, color on photo is representative- real color as described

Feature:

Well protected your transmitter,prevent it from being scratched

Colorful and shiny sticker,make you transmitter more beautiful

Make your TX look different

Designed to refresh your 18SZ in nice cool outlook! in carbon Blue/Purple, Image of TX is for demo purposes, the color is Blue/Purple Carbon Fiber Protection Sticker with Screen Protector Usage: For Futaba T18sz, TX not included, color on photo is representative- real color as described Feature: Well protected your transmitter,prevent it from being scratched Colorful and shiny sticker,make you transmitter more beautiful Make your TX look different

Designed to refresh your 18SZ in nice cool outlook!

Designed to refresh your 18SZ in nice cool outlook! in carbon Blue/Purple

Carbon Fiber Protection Sticker with Screen Protector
Usage: For Futaba T18sz, TX not included, color on photo is representative- real color as described

Feature:
Well protected your transmitter,prevent it from being scratched
Colorful and shiny sticker,make you transmitter more beautiful
Make your TX look different

One of the most Favorite ESCs finally got an upgrade! With this ESCs brand new F396 MCU processor, it is able to handle the higher RPM motors with ease. The processor on this ESC runs nearly twice as fast as the previous version, 48Mhz. It has also been equipped with a bit more flash memory and RAM. Designed to be compact and lightweight, this may be the perfect choice for many of the FPV Racers and Acro flyers! Thrust results to come. One of the smallest ESCs on the market for its size but can keep up with the bigger brothers. FVT LITTLEBEE 20A PRO ESCs supports 2-4s lipos, are mosfet driven and with fast, dedicated driver chips on a high quality PCB.

Specifications:

• Input: 2-4s Lipo
• Constant: 20 Amps
• Burst: 30 Amps(10 seconds)
• Weight: 6g w/wires
• Dimensions: 24.5 x 12.5 x 3mm
• Motor wire: 50mm 20g
• Signal wire: 100mm 22g
• MCU: Silabs F396 @ 48Mhz
• PCB - 4 Layer Blind Pole PCB - 3oz Pour
• Mosfet: N-Channel
• BEC: None

 

The Little Bee is a good quality, solid performing, small and lightweight ESC that is ideal for quads and multirotor applications.

Little Bee uses a Silabs processor and fast dedicated driver chips. It comes flashed with BLHeli Firmware utilizing Oneshot125 communication protocol making it fast and responsive to throttle movements.

The Little Bee 30A ESC is exactly what you are looking for in a light weight, reliable and very affordable speed controller.

Features:

• • Lightweight
• • Small size
• • Preflashed with BLHeli Firmware (V14)
• • Silabs MCU
• • 2-6s LiPoly
• • OPTO ESC

Specs:

• Input: 2-6s LiPoly
• Constant: 30 Amps
• Burst: 40 Amps
• BEC: No BEC, opto only
• Dimensions: 35 x 17 x 3mm
• Weight: 11g (with wires)

Note: this is an OPTO ESC so you will need a 5V BEC to power your flight controller.