AVIZAR

DJI Mavic Pro Aluminum-Alloy Foldable Extender 4-12 Inches Tablet Stand Holder, Snap On / Off Bracket for Mavic Remote Controller

Feature:

• Aviation Aluminum-Alloy Material Made.
• CNC technology.
• High Quality design and Perfect fit with DJI Mavic Pro Remote Controller.
• 120mm-190mm wide support 4-12 inch phone & Tablet, 45 degrees to up and down support a clean view, Tighten & Stable.
• Foldable and Iphone sized.Light weight, only about 227g.
• Convenience to carry outside with other mavic accessories together.
• Just need 2 step to snap on / off with no tools.
• Support Tablet Sunshade & Hanging lanyard.

8330 Quick Release Folding Propellers for DJI Mavic Pro

Easy-to-fold, powerful thrust, well balanced.
Push type design, easy to mount, secure and durable.
Foldable and light
Push type design allows for quick mounting and detaching.

Dimensions: 21.1 × 7.6 cm
Included: 1x Pair of Propellers

 

DJI Mavic Pro Accessories Tablet Phone Mount Holder for Remote Controller,Extended 4-12 Inches iPhone iPad Stand Holder,360 Degree Rotating - Black

COMPATIBLE:Perfect design for DJI Mavic Pro
FOLDABLE:Easy to fold and carry.Meantime the whole set of support bracket is easy to install and remove.
PORTABLE:Light weight,only about 195g,Convenience to carry outside with other mavic accessories together.
PROTECTED:There pasted sponge pads on the clamps for good protections.Sponge can protect the edges of the phone and tablet.
STRETCHABLE:120mm-190mm wide support 4-12 inch phone & Tablet ,45 degrees to up and down support a clean view,Tighten & Stable,Will stay in the place you need.

DJI Phantom 3 Battery Parallel Charging Board ,charge up to 3 packs.This battery charger board for dji phantom 3 can suit 15A charger adapter.

Drone Landing Pad 110 cm is an easy to take along landing place for your drone or quadcopter. The Landing Pad has a diameter of 110 centimeters and is easy to attach to the surface thanks to the three pegs supplied. This means you always have access to a landing site if the normal surface is not sufficient. In addition, you also do not suffer from grass or pebbles between the propellers when ascending or descending. The Landing Pad has a bright orange color on one side and a bright blue color on the other side, so you always have an eye-catching landing site.

Main features of the Drone Landing Pad 110 cm:

Landing site for drone or quadcopter
Diameter of 110 centimeters
Remains well thanks to the supplied pegs
Always visible through two color surfaces
Easy to carry
Collapsible to 45 centimeters
Weighs 500 grams

Specifications:

• Landing Pad
• Protective case
• Plastic Pegs
• Stickers

Dual BEC Output 5V 12V Adjustable Voltage Distribution Board

• 5V 12V Adjustable Voltage Dual BEC Output Board ESC Distribution Connection Board for FPV
• Distribution board with two-way BEC output is made of thickened copper foil and turmeric processed on the surface and supporting 100A current.
• Directly poweing a Brushless Gimbal, 5.8G TX & RX system or FPV camera from  12V BEC, while 5V BEC can provide power for Flight control
• 1CH 12V output, 1CH adjustable, support 3-20V adjustable
• Each BEC support 2A stabilized output

Note: Before use BEC output port, please measure the real output voltage first, make sure it meet your requirements. Delivered as 5V output as default

The Boscam RD945 is  one of the best FPV receivers on the market and now it has been made even better thanks to its recent upgrade, which provided an additional 8 channels to make it RaceBand compatible. Note that it still offers all of the 32 traditional FPV channels, so it's fully compatible with other 5.8Ghz gear on the market including Fatshark & ImmersionRC gear.

In addition to the RD945's wide range of frequencies, it also boasts many other features including, a true 40 channel diversity receiver with dual AV outputs which can be used to feed a monitor or goggles; auto channel search at the push of a button, and a clear LCD display that shows band/channel and the actual frequency number. It also supports a wide input voltage range 6-28v making it compatible with most power sources, including LiPo batteries. Finally, we're also impressed with the construction of the RD945. The Rx is contained within a durable metal case, which also acts to shield the receiver increasing its sensitivity.

Why do I need a diversity reciever?

A diversity receiver is essentially two receivers all in one. In essence, it allows you two mix and match antennas for a solid video link. So it might be that you select a circular polarised omnidirectional antenna, which will provide good reception in all directions in the near field, and a directional high gain patch antenna for long distance flights. The diversity receiver is clever in that it will seamlessly switch between the receiver with the strongest signal.

What is RaceBand?

RaceBand was first pioneered by ImmersionRC to allow more pilots to race together without interferance. Essentially, RaceBand is just another set of 5.8Ghz frequencies, to be specific they are: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917. The difference between the RaceBand and the other 5.8Ghz bands is that RaceBand frequencies are more spread out across its band (37mhz separation) thus allowing more pilots to fly FPV together without their video feeds causing interference with each others.

Note that many shops are still selling the the old FR632 32-channel version, which does not support RaceBand.

Features:

•     48 channels / 6 Bands - includes Race Band channels compatible with Fatshark & ImmersionRC gear
•     Auto channel scan and lock on
•     True 5.8GHz 32CH diversity system with indicator
•     Dual buffered AV output for DVR or second monitor
•     LCD display, frequency and channel synchronous display
•     Power off channel memory

RECEIVER Frequency:

    FR1 to FR6 Bands
 

For best range and video link stability we recommend using circular-polarized, Patch or Helical Antenna Set (SMA), see 'related products' below.

Dynam Tomcat servo
For RC Plane Airplane Aircraft Helicopter
RC hobby
Detrum 3.7g Servo
DY-1100 Servo

DYX-0037 Aluminum Round Spacer 3mm ID, 5mm OD set of 4pcs

Color can be Aluminum clear or Black

Set of 4 pcs.

PUSHROD EASY EZ-CONNECTOR made from stainless steel for 2.1mm, 10pcs

Set including 10 complete connectors.
Made in korea

 

The E420P 4 Axis drone is the 4 axis quacopter with 22kg payload for agriculture spraying. The E420P agriculture drones continues the classic design elements of the old E series. It adopts a streamlined body design, and the whole body is waterproof, without fear of high pressure washing. The new P series upgrade product adopts a new integrated molding process. Complex to simple, the fuselage is integrated from dozens of original parts into a whole, and the fuselage is made of high-strength and impact-resistant materials.

The extremely effective and adaptable EFT 20L Quadcopter Agriculture Drone is a UAV made especially for precision farming. Its Four-rotor design provides increased stability and payload capacity, which makes it ideal for completing a range of agricultural jobs like fertilizer and pesticide-focused spraying. The 20-liter capacity tank ensures complete coverage and effective application of agricultural chemicals making it a deal for charge-scale farming operations. With its sophisticated navigation technologies, which include GP and GNS, it ensures accurate application areas and flight patterns, reducing waste and increasing crop output. Its sturdy design and weather-resistant qualities allow it to function in a variety of environmental settings, giving farmers a dependable tool for clever farming solutions.

Specifications:

• Digonal Wheelbase: 1462mm
• Folding Dimensions: 713x713x663mm
• Unfolded Dimensions: 1954x1954x663mm
• Arm Diameter: 40mm
• Tank Capacity: 22L
• Frame Weight: 6.55kg
• Full load weight: 42.5kg
• Power source: Battery
• Power Connector: AS150U
• Operation temperature:10~50℃
• Recommended battery: 14S 22000mah

Package includes:

• 1 E420P drone frame model
• 2 CCW motors
• 2 CW motors
• 1 brushless 8L water pump
• 1 pneumatic connector
• 4 extended nozzles
• 1 universal spray pneumatic packet set
• 1 E4P Motor parts packet
• 2 Flat radar fixing parts
• 1 obstacle avoidance radar fixing parts

Those models are special and customizable, if you need more info, contact us before placing the order.

Battery for the drone is not included. The whole package is not assembled and tuned, customers need to assemble and tune the settings.

Due the huge size of the boxes, for delivery times and shipping info please contact.

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

• Color: colorless
• Filing gap- up to 10mm
• Bonding time: 55min
• Curing time: 150 min
• Pack of 50ml, with 1 mixing tube

Bonding gun (Dispence gun) Not included

 

 

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

High lap shear strength (up to 39 MPa with CFK cured 2 h over 80 °C according to ASTM D 1002)

Very high impact and peel strength

Good thermal resistance

Thixotropic formulation

Low exothermic reaction and shrinkage

Solvent free

Processing is very easy due to the application with a dosing gun. This also eliminates mixing errors. Elan-tech® ADH 891.892 NF cures at room temperature or elevated temperatures. Post-curing at elevated temperatures is required to achieve maximum temperature resistance.

Technical data:
Curing time (25 °C): 210 minutes
Bonding time: 15-25min
Handling strength (23 °C)**: 4 hours
Viscosity: 100,000 to 150,000 MPas
Maximum gap fill: 8 mm
Colour: Dark grey
Elongation at break: 6%.
Heat deflection temperature: 24 h / 23 °C = 60 °C; 2 h / 80 °C = 85 °C
Flexural strength: 90 MPa
Bending modulus: 2200 MPa
Tensile strength: 54 MPa
Compressive strength: 70 %.

Delivery scope: 50Ml package, with 1 mixing Tube

We recommending to use the Bonding gun (Dispence gun) , Sku is ELIX15138, please order it separately.

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

• Color: Black
• Filing gap- up to 20mm
• Bonding time: 15 min
• Curing time: 150 min
• Pack of 50ml, with 1 mixing tube

Bonding gun (Dispence gun) Not included  

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

High lap shear strength (up to 39 MPa with CFK cured 2 h over 80 °C according to ASTM D 1002)

Very high impact and peel strength

Good thermal resistance

Thixotropic formulation

Low exothermic reaction and shrinkage

Solvent free

Processing is very easy due to the application with a dosing gun. This also eliminates mixing errors. Elan-tech® ADH 891.892 NF cures at room temperature or elevated temperatures. Post-curing at elevated temperatures is required to achieve maximum temperature resistance.

• Color: Biege
• Filing gap- up to 10mm
• Bonding time: 20 min
• Curing time: 100 min
• Pack of 50ml, with 1 mixing tube

Delivery scope: 50Ml package, with 1 mixing Tube

We recommending to use the Bonding gun (Dispence gun) , Sku is ELIX15138, please order it separately.

eMAX Talon Wrench For fpv RACER Series Motors Excellent looking and practical tool. (1 Toll RED color).

Hi-Resistance Engines carburetor O-ring for Carburators 13mm- this is a better material, more resistant to Fuel and temperatures.

This oring is made in Japan and made to fit Carburetors with 13mm diameter Neck

The material is made for More resistant to Fuel, nitro, Benzin compared to original o-ring.

Delivered as set of 5

Engines carburetor O-ring for Carburators 13mm- this is a better material, more resistant to Fuel and temperatures.

This oring is made in Japan and made to fit Carburetors with 13mm diameter Neck

The material is made for More resistant to Fuel, nitro, Benzin compared to original o-ring.

Delivered as set of 5

Engines carburetor HI-resistance O-ring for Carburators 17mm- this is a better material, more resistant to Fuel and temperatures.

This oring is made in Japan and made to fit Carburetors with 17mm diameter Neck

The material is made for More resistant to Fuel, nitro, Benzin compared to original o-ring.

Delivered as set of 5

Quantum Balance Adaptor EH Q-B-0007 2-6S

Etronix 150A Watt Meter & Power Analyser

Helps to prevent peak currents damaging battery, ESC's, motor, wiring and connectors.
Set cut off voltages, check battery capacity & health.
Confirm proper battery charger operation.
Measure receiver and servo current to determine if a UBEC is needed.

Specifications:

• Operates from 4.8-6.0v
• OV with potential auxiliary battery
• Measures 0-150A resolution 0.01A, 0-60V resolution 0.01V, 0-6554W resolution 0.1W, 0-65Ah resolution 0.001Wh, 0-6554Wh resolution 0.1Wh
• 16x2 backlit LCD display
• Dimensions: 85x42x25mm
• Weight: 82g

Extension Cable for Antenna RP SMA Male to RP Female-20CM  - Flexibility Your FPV System Deserves!

An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

Length 20cm

Extension Cable for Antenna RP-SMA jack to RP-SMA plug, 5cm, 90 Degrees - Flexibility Your FPV System Deserves!

An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

Length 5cm

Extension Cable for Antenna SMA jack to SMA plug, 5cm, 90 Degrees - Flexibility Your FPV System Deserves!

An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

Length 5cm

Extension Cable for Antenna SMA jack to SMA plug, 10cm , 90 Degrees - Flexibility Your FPV System Deserves!

An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

Length 10cm

Antenna extension - Extension Cable for Antenna SMA Male to Female,20CM  - Flexibility Your FPV System Deserves!

An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

Length 20cm

EXTRON glue sticks are perfect for all common 11mm glue guns.
The ingenious adhesive mixture is characterized by an optimal melting point. EXTRON glue sticks offer excellent gluing performance on almost all materials, whether wood, glass, paper, cardboard, stone, porcelain, textile, ceramic and much more. Ideal for hobby and workshop for crafting, repairing, decorating, mending, fixing or assembling.
Dimensions each approx. Diameter 11 mm x 270 mm
Sold as a Single Stick

The Extron 10-port connector shape allows you to mold "handles" to the ten most popular model building connectors.

The Extron connector mold is made of CNC machined aluminum for durability. The application is very easy (see pictures). All you need is a standard hot glue gun.

1. moisten the inside of the plug form with a commercially available release agent, e.g. wax spray
2. insert plug or socket with cable already soldered into the mould and close with the upper part of the mould
3. press hot glue into the central hole until it swells out at the side outlet holes
4. after a short cooling down, remove the plug from the mould and remove the sprue with a sharp knife - that's it!

The Extron connector shape is suitable for:

• T connector (Deans)
• T socket (Deans)
• MPX 6-pin plug
• MPX 6-pin socket
• MPX 8-pin plug
• MPX 8-pin socket
• XT-60 connector
• XT-60 socket
• XT-90 connector
• XT-90 socket

EZ Pushrod Connector Linkage Stopper 1.3mm, set of 10

EZ Pushrod Connector Linkage Stopper 2mm, set of 10

Fabric Heat Shrink Braided Sleeve is an excellent choice that combines the protection of braided sleeve with the conforming and bundling abilities of heat shrink tubing.

2:1 Fabric Heat Shrink Braided Sleeve consists of polyester multi filament and special modified polyolefin monofilament, it will shrink when expose to heat source, this unique woven construction makes it extremely flexible, easy to install on the hoses with irregular shapes. It is suitable used in rough environments, provides excellent abrasion resistance and noise reduction. Its woven material provides protection from cuts and chafing, as well as temperature resistance and vibration and noise suppression. An excellent choice for automotive as well as industrial applications, this product protects, conforms and looks great.

Woven design provides excellent abrasion resistance. Great for plastic pipes, rubber hoses, and cable bundles

Shrinks to 1/2 of the original diameter to conform to oddly shaped
objects, and provides secure termination of wire loom / braided sleeve
projects

Easily cuts with scissors without fraying for easy preparation

• Diameter before Shrink 10mm, best to use on 5-9mm diameter applications
• Shrink Rate 2:1
• Length 1m

Fabric Heat Shrink Braided Sleeve is an excellent choice that combines the protection of braided sleeve with the conforming and bundling abilities of heat shrink tubing.

2:1 Fabric Heat Shrink Braided Sleeve consists of polyester multi filament and special modified polyolefin monofilament, it will shrink when expose to heat source, this unique woven construction makes it extremely flexible, easy to install on the hoses with irregular shapes. It is suitable used in rough environments, provides excellent abrasion resistance and noise reduction. Its woven material provides protection from cuts and chafing, as well as temperature resistance and vibration and noise suppression. An excellent choice for automotive as well as industrial applications, this product protects, conforms and looks great.

Woven design provides excellent abrasion resistance. Great for plastic pipes, rubber hoses, and cable bundles

Shrinks to 1/2 of the original diameter to conform to oddly shaped
objects, and provides secure termination of wire loom / braided sleeve
projects

Easily cuts with scissors without fraying for easy preparation

• Diameter before Shrink 8mm, best to use on 3-7mm diameter applications
• Shrink Rate 2:1
• Length 1m

390* Versatile FPV Pan module + Tilt Module Includes: Pan Module + Pre-built Tilt Module, 1PCS Heavy Duty Titanize Metal Digital Servo, and 1PCS 17g servo

•   Servo Pulse width range: 1000-2000
•   Pan moving range: 3900-4000  (Full range)
•   Tilt moving range: 600-900 (Full range)
•   Control angle may be subject to your equipment wires. Please check carefully before flight to prevent binding.
•   Compatible with Gopro2/Gopro3/Gopro water housing/ General FPV cameras

Camera is not included

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

This product is made of the high-grade material with strong tension, which makes it more durable and eco-friendly. The safest way to charge and store your lipo batteries and protect your workshop, family and home from the hazard of lipo

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge