AVIZAR

The next generation of our 12 IN 1 Multi- Adapter, This adaptor is "All in one" features 4mm banana plugs that fit most chargers,
And its nicely split into 12 different types of plugs on the other end.

Includes the following connectors:

4mm Silicone Wire with Banana connector towards the charger, splitted to 12 different connectors:

• EC3 gold connector
• T- male mini deans
• Futaba TX connector
• JR/Spektrum TX connector
• Futaba RX connector
• JR/ Spektrum RX connector
• JST 2 pin connector
• EC5 gold connector
• XT60 connector
• 6mm Gold connector
• 4mm Gold connector
• BARE leads- connect any of your..

Take the mess out of your charging with this charger adaptor.

The parallel charge leads allow you to charge up to six battery packs simultaneously.
Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

This unique design serves as both a charging and balancing cable for up to 6 of your 2S battery packs. Connect to your batteries with the connectors, as used in the Blade 130X, Beast UMX or Sbach 342 UMX. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

Charging adapter XT60 Female to XT30 Male

This extending adapter is very helpful when you need to convert a charging cable XT60 to Battery XT30 plug

Charging adapter XT60 Female to XT30 Male 1,5mm² 30cm

This extending adapter is very helpful when you need to connect a charging cable from XT60 to XT30

These are GREAT working pliers! Soft grip handle, curved end of jaws, spring loaded open.
Not only the best we've used, also the best value!

High quality chrome vanadium steel material , Slip-resistant handle, easy to hold it and operate.
Suits for RC helicopter DIY

Specifications:
Material: Chrome vanadium steel
Size: 16.7*7.5*1cm
Weight: 180g

Deluxe type, ball link plier, multi purpose tool.

These are GREAT working pliers! Soft grip handle, curved end of jaws, spring loaded open. Not only the best we've used, also the best value!

CL-58 5.8GHz Clover-Leaf Spyro Circular Polarized Antenna set, 2 pcs, TX+RX.

Designed for FPV applications.
This offers better looks and excellent protection.
Easy to setup and use standard SMA and RP-SMA connectors.

Description:
SWR≤1.5   
Weight:13g   
Connect: SMA(needle inside) or RP-SMA(hole inside)
Size: TX 8cm,  RX 12cm

POWERZIP strip, 15mm wide, 1meter long, 2mm thick

Power tape, holding power is up to 50 kg!!, Double face transparent silicone tape ( red cover), excellent for installation of wires, wood, fiber, Gyro , Receiver and more..

Its suitable for internal & external use it offers high adhesion to a wide variety of surfaces. It has superior 'wetting out' properties which increase the bonded surface area increasing the strength of the bond. It has excellent ageing properties and is resistant to U.V. light, abrasion, corrosion & moisture.
Service temperature is -30°c - +80°c (continuous)/ +130°c (shorterm).

There is a red easy-peel liner one one side of the tape. Once the liner is removed, the tape is completely clear & ideal for glass/perspex where an invisible fixing/fastening is required.

Also, ideal for fastening things to any surface, Anti vibration.

This is the CNC 3 way fuel filter from Avizar.
Suitable for use on Nitro helicopters and other glow-fuel powered models it includes a third port to fuel and de-fuel . This filter is easily disassembled for cleaning and maintenance purposes.

Package includes: 1 Filter, Blue color

This is the CNC 3 way fuel filter from Avizar.
Suitable for use on Nitro helicopters and other glow-fuel powered models it includes a third port to fuel and de-fuel . This filter is easily disassembled for cleaning and maintenance purposes.

Package includes: 1 Filter, silver color

CNC 30mm Aluminium Pipe clamp for carbon fiber tube Red or Black

Features:
30mm Tube clamp: equipped with M3 * 55mm anti-skid screws and nuts and a weight of 28g

Package included: 1pcs * Pipe clamp for carbon fiber tube Red or Black

DYI : Make your drone with retractable Arms .D30 CNC Aluminum Folding Arm Joint Fitting (suit for D30mm Tube) W/ up-tilt angle - Auto Edition (Black) V2.

Specification:

• Suitable for 30mm Tube
• 5 degree dip angle to help to enhance stability
• Spring Type Automatic, ease and simple to use!
• DIY necessary! suitable for Quadcopter/Hexacopter/Octacopter
• Material: aluminum alloy
• Color: Black
• Weight: 116 g

CNC Aluminium Fuel line end cap (set of 2)

Made in Korea, from 7075 Alu

CNC Aluminum Quick Release Self-Tightening Prop Adapters for 20-24" props, 10mm hole- set of 2.

If you have large props on your multi copter 20-24" and find it particularly hard to store then the quick release prop adaptors will help, as it allows you to quickly and easily attach and remove your propellers from your multi copter motors without any tools. This new design is 200% lighter than the old version and can now support 20-24 inch props.

These prop adapters are self-locking and you will receive two clockwise and two counter clockwise threaded adapters to use with the corresponding motors. It’s important to make sure that the adapter corresponds to your motor direction.

Suitable for various types of UAV motors using 15mm/M3 or 20mm / M4 three or five hole carbon fiber propellers and motors. The two hole pitches are suitable for different propellers and motors, and can be used in a wider range. The paddle seat distinguishes between color and forward and reverse. Red is forward rotation (motor counterclockwise), Black is reverse rotation (motor clockwise). compatible with commonly used 3 or 5 hole carbon fiber propellers and 98% brushless motors on the market.

Specification:
Direction of rotation: CW / CCW
color: Red and Black(1 pair)
Product Weight: 27g
Screw pitch: 15mm / M3, and 20mm /M10 hole
Material: Space aluminum

CNC Aluminum Quick Release Self-Tightening Prop Adapters for 20-24" props, 4mm hole- set of 2.

If you have large props on your multi copter 20-24" and find it particularly hard to store then the quick release prop adaptors will help, as it allows you to quickly and easily attach and remove your propellers from your multi copter motors without any tools. This new design is 200% lighter than the old version and can now support 20-24 inch props.

These prop adapters are self-locking and you will receive two clockwise and two counter clockwise threaded adapters to use with the corresponding motors. It’s important to make sure that the adapter corresponds to your motor direction.

Suitable for various types of UAV motors using 15mm/M3 or 20mm / M4 three or five hole carbon fiber propellers and motors. The two hole pitches are suitable for different propellers and motors, and can be used in a wider range. The paddle seat distinguishes between color and forward and reverse. Red is forward rotation (motor counterclockwise), Black is reverse rotation (motor clockwise). compatible with commonly used 3 or 5 hole carbon fiber propellers and 98% brushless motors on the market.

Specification:
Direction of rotation: CW / CCW
color: Red and Black(1 pair)
Product Weight: 27g
Screw pitch: 15mm / M3, and 20mm /M4 hole
Material: Space aluminum

CNC Aluminum Quick Release Self-Tightening Prop Adapters for 20-24" props, 6mm hole- set of 2.

If you have large props on your multi copter 20-24" and find it particularly hard to store then the quick release prop adaptors will help, as it allows you to quickly and easily attach and remove your propellers from your multi copter motors without any tools. This new design is 200% lighter than the old version and can now support 20-24 inch props.

These prop adapters are self-locking and you will receive two clockwise and two counter clockwise threaded adapters to use with the corresponding motors. It’s important to make sure that the adapter corresponds to your motor direction.

Suitable for various types of UAV motors using 15mm/M3 or 20mm / M4 three or five hole carbon fiber propellers and motors. The two hole pitches are suitable for different propellers and motors, and can be used in a wider range. The paddle seat distinguishes between color and forward and reverse. Red is forward rotation (motor counterclockwise), Black is reverse rotation (motor clockwise). compatible with commonly used 3 or 5 hole carbon fiber propellers and 98% brushless motors on the market. The hole pitch is 15 / 20mm.

Specification:
Direction of rotation: CW / CCW
color: Black-silver
Product Weight: 27g
Screw pitch: 15mm / M3, and 20mm / M4
Material: Space aluminum

CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CCW) (1pc)

Mounting the prop on the adapter and the base to the motor and a flick of the prop will thread its self on.

Specification:
Direction of rotation: CW / CCW
color: red
Product Weight: 7g
Screw pitch: 12mm
Screw Size: M3
Material: Space aluminum

CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CW) (1pc)

Mounting the prop on the adapter and the base to the motor and a flick of the prop will thread its self on.

Specification:
Direction of rotation: CW / CCW
color: red
Product Weight: 7g
Screw pitch: 12mm
Screw Size: M3
Material: Space aluminum

High quality CNC electric fuel pump is designed for nitro or gas for rc models like planes, boats or cars.

Specs:

•     Working Voltage: 4.8-6v
•     Flowrate: 1000cc/minute
•     Lift: 0.8M
•     Weight: 175g

Product Features:

• All-metal gear parts= long life
• Fully enclosed motor design, high security;
• Fully shielded metal housing, no interference;
• Reverse switch
• High efficiency, low operational voltage 4.8v
• Comes with mounting brackets, screws can also be fixed with cable ties can be used;
• Polyurethane seals, fits methanol or gasoline

This is the newest arm for DIY multicopters.

Best Arm in terms of quality, made 100% in Europe from 6061 Aluminium, the tube itself is made from Carbon. The inserts fits and secures the arm, which allows the part to be solid as rock. The base insert (the part which connecting to the quad), allows the arm to be easily retracted. The motor mount with its very unique design, allows single or double coaxial motor mounting with a special reinforced cnc part inside.

This unit was tested with over 30kg of force for a long time, to show how strong it is.

Specifications:

• Tube length: 45cm (can be shortened if needed)

Set includes:

• 1 Tube
• 1 Base insert
• 2 Motor mounts
• 1 Insert
• Hardware

CNC Metal Pitch Arm set for logo 480/550

Includes:

• 2x 6061 pitch arm

CNC Metal Pitch Arm set for Logo 600

Includes:

• 2x 6061 pitch arm (Pre-installed)

engine test running-in BENCH for  NITRO engine/gasoline engine

Best way to make model engines test and run in before they can fly in order to achieve the best performance

High strength aluminum alloy, cnc made, high strength, oxidation and corrosion protection, durable and beautiful

Suitable for 06-160 class engine (-model engine), gasoline engine should be judged according to installation and height of installation platform

Fixed engine width can be adjusted by itself.

Package Includes:

• Note: Engine not included
• 1 Piece Bending Fixator
• Engine Fixed Platform
• 1pcs Allen Wrench
• 4pcs M5x50 Allen Screws
• 4pcs M5 Gasket
• 4pcs Self-locking Screw

Fuel cap with fittings , fits Coolpower, Cosmo ( 44mm)

Please note:

• These caps will only fit mentioned containers and will NOT fit other brands of fuel bottles
• These are only made for connecting a fuel pump on the airfield and are not fueltight for transport.

Name:dISPLAY tool holder

Material: aluminum alloy

Color: Black

holes(22 mm) :4PCS

holes(18 mm) :12PCS

holes(14 mm) :12PCS

L:212 mm

W:52MM

Note: tools not included

Package List:

1pcs * tool holder

These Metal cnc bore size reducers are designed for all 8mm hub propellers, allowing them to be fitted to various shaft sizes whilst maintaining accurate centering.

They are also suitable for Graupner Elektro propellers and many other propellers with 8mm bore.

Packet contents: -

  4 × 8mm to 6mm propeller CNC metal hub inserts

Specification:

•  Outside Diameter: 8mm
•  Inside Diameter: 6mm

Throw device for Any remote controlled system, Aluminium 6061 cnc produced.

Specifications:

Material: CNC 6061 Aluminum alloy
Weight: 55g
Made to release payload up to 8-10kg

Included parts with 25T servo arm (Futaba/Savox type)

Made to work with Standard size servo (not included)

Servo not included

Collapsible folding GPS Antenna Mount without stand

•   Collapsible design
•   Compatible with 4mm GPS antenna mount.
•   T6 aluminum
•   Weight only 4gr
•   Silver color
  

Colored Carbon fiber tube 30x28mm, 1000mm long, choice of White or Light Yellow color.

Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

Carbon Fiber 3k tube in White or Light Yellow color.
Size : 20 mm OD, 18mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

  Size:20mm out diameter 18mm inner diameter
  Length: 1000mm
  100% Carbon Fiber
  Quantity: 1pc

Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!please advise +- the size how you want them cut, example 50/50cm, 30-70...

Colored Carbon fiber tube 30x28mm, 1000mm long, Yellow color Or White, CHOOSE in options
Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

Carbon Fiber 3k tube in Color finish
Size : 30 mm OD,28mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

•   Size:30mm out diameter 28mm inner diameter
•   Length: 1000mm
•   Quantity: 1pc
•   Color- Yellow- white- choose in options
  

Conductive Adhesive Emi Shielding Copper Foil Tape for ESC, Wires and more

• EMI shielding for electronic components
• Shielding for interferences from ESC/ and other sources of magnetic interferences.
• Eliminate Electrical noise and humming around flight controllers
• Copper trace repair on printed circuit boards
   
• Pack of 1m x 50mm

JST type connector kit including male and female plug.

Included: 1 Male Housing with 2 Connectors.

1 Female Housing with 2 Connectors

Nylon Screws - Countersunk head screw  M4x20

Set of 10 Screws.

Countersunk Hex screw M3x10 (10 pcs)

Countersunk Hex screw M3x12 (10 pcs)

Countersunk Hex screw M3x14 (10 pcs)