AVIZAR

Viton Muffler O-Ring 20x3mm Black

Those O-Rings makes it easy to always have a replacement o-ring muffler, Hatori and many others

Specifications:

Material Viton

Size: ID-14mm, OD 20mm, Thickness 3mm

Set of 4

Viton Muffler O-Ring 20x3mm Brown color

Those O-Rings makes it easy to always have a replacement o-ring muffler, Hatori and many others

Specifications:

Material Viton

Size: ID-14mm, OD 20mm, Thickness 3mm

Set of 4

Less then 4 grams of weight, and this small tool is your insurance for battery condition on heli or other models.
Selectable switch to choose your battery pack 4.8 or 6v.
Very Bright leds to insure perfect visibility.Very low power consumption, not to draw too much current.
Flat and very easy to mount.
Just place it near your canopy screen, or on the fuselage, Boom, Under wing and you can be sure you are ready to go.

Vulcan 400Amps V2 Power Distribution Board for Large Multi-Copter

The new 400A V2 PDB from Vulcan uses the same well proven design used in the 250A but with a higher current rating..

It features no less than 18 pairs of solder pad connection points of different sizes to suit various uses from very heavy duty battery connections to small auxiliary power feeds.

Specifications:

• Diameter: 64mm
• Weight: 24g
• Mounting Holes: 3mm
• Solder pad diameter: 7 - 12mm
• Current Capacity: up to 400A

Included:

• Power board
• 10mm Nylon Mounting Pillars
• 6mm bolts

Please Note:

Due to the very high copper thickness on this board you will need a soldering iron with a large head of minimum 100W to make good solder joints, ideally more!

Washer 8.4x16x1.5 (10pcs)

Nickel coated wheel collars for 4mm axes. A hex set screw provides a secure fixing.

Set of 4 collars

Nickel coated wheel collars for 5mm axes. A hex set screw provides a secure fixing.

Set of 4 collars

XT150s are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!
The male connector uses a collet style spliced contact area to provide more surface to surface contact than standard gold connectors which use a thin mushroomed sheet as a spring.

Easy to solder and use, they are perfect for large batteries, esc or motors!

! Can be used together( easy clip) or separated

Features:

• Capable of 150 continuous amps w/ 8 awg wire
• Ergonomically pleasing and easy to grip
• Protected to avoid shorting and reverse polarity
• Superior technology suited to today's advanced applications
• Designed with convenience and reliability in mind
• Diameter: 6.0mm.

Set:

• 2 x Red Housing
• 2 x Black Housing
• 2 x Male Bullet
• 2 x Female Bullet

Charging cable for XT60 connectors. ends with 4mm Banana Charge Lead, Made in germany.with Silcone cable Quick and easy to use, Used for charging Lipo Batteries with XT60 Connectors

Charging adapter XT60 Female to BANANA 4mm female

This extending adapter is very helpful when you need to connect a charging cable (with Banana 4mm) to Charger which using XT60 connector as Output

XT60 male to Mini Alligator clips

Adaptor for XT60 male( battery end) to DEANS( T-plug) Male( with pins out) , Use this converter where needed.

Set of 1 adaptor included ( photo shows 2 aspects)

This battery plug will allow you to charge your Typhoon H battery with any Lipo Charger,
It comes with wires and balancer separately. connecting multiple wires is also possible, this way you can charge multiple lipos at the time

Soldering Station ZD-937, black, 150°C - 450°C, 48W,ESD-protection, with pre-selection buttons 100, 200, 300°C.

The station is ideal for home elektronics, school, workshop, service, production and lab.

Among the easy and quick temperature adjustment with the up-/down-buttons in 1°C- and 10°C-steps, it is possible to pre-select 100°C, 200°C and 300°C with the related button.

• Compact, solid and insulated housing.
• Station and soldering iron pod are arrangeable seperately.
• Complete with soldering iron pod and soldering sponge.
• LCD display with ilumination shows must- and actual value.
• Energy display
• 3 pre-selectionable fixed temperatures
• Electronical sensor
• Temperature controll
• Short heating-up time thanks to its generous designed power supply
• Powerful 48W soldering iron for a wide range of application
• Temperature adjustment with buttons from 150 to 450°C, 1°C and 10°C steps
• Optical and accoustic error message in case of malfunction
• ESD protection

Technical Specification:

• Input Voltage: 230V (220-240V), 50 Hz
• Power of soldering iron: 48W
• Fuse: T 1A/250V
• 150°C-450°C temperature adjustment with 1°C- and 10°C-steps
• Display accuracy: 5%
• LC-Display with 3 1/2 digits
• Dimension WxHxD: 210x125x135mm
• Weight 1,8kg

Delivery:

• Soldering station ZD-937
• Soldering iron pod with drawer and soldering sponge
• Soldering iron with tip 1,6 mm
• German and english manual

5.8Ghz 14dbi Circular Polarized High Gain Flat Panel AntennaLHCP/RHCP For 5.8G FPV Transmitter VS Immersion Fatshark

Designed to be mounted to FPV / goggle systems, this highly compact panel antenna adds excellent directional FPV range that will outperform similar omnidirectional antennas with ease.

Specification:

• Frequency range: 5.6-6GHz
• Standing wave ratio: <1: 1.5
• Polarization: Circular Polarization (LHCP / RHCP)
• Lobe width: 40 degrees (H + V)
• F / B:>35db
• Impedance: 50 ohms
• Interface: RP-SMA(hole)
• Size: 73mm x73mm

Features:

• High gain
• Anti-interference
• Suitable for long-range distance

Package included:

• 1 x antenna