AVIZAR

Stainless Screw Self tapping Shoulder with Washer 2.5x14mm, 10 pcs

Stainless Screw Self tapping Shoulder with Washer 2.6x10mm, 10 pcs

Stainless Screw Self tapping Shoulder with Washer 2.6x12mm, 10 pcs

Stainless Screw Self tapping Shoulder with Washer 2.6x14mm, 10 pcs

Stainless Screw Self tapping Shoulder with Washer 3x14mm, 10 pcs

Stainless Screw Self tapping Shoulder with Washer 3x16mm, 10 pcs

Replacement Stainless steel Pushrod 2.5x25mm, 1 pcs

This pushrod is produced with rolled thread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x50mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod 2.5x30mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod 2.5x35mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x40mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x45mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x60mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x65mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x20mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x30mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x40mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x45mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x50mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

StandBox is a light flexible modular system used for building, maintenance, transport, and storage of R/C model airplanes.

Transport:

StandBox makes airplane transportation safer, whether riding in the car's trunk or while carrying the plane with the help of the attached carrying straps. Thanks to its dependable and flexible construction, there is no need to worry about possible damage which could be done to the model airplane during transportation.

Storage Solution:

StandBox effectively organizes your fleet of R/C models. Due to StandBox's dovetail joints and clips it's possible to stack them up on top of each another (Max 5ft./1.5m). The StandBox dovetail locking joints protect your models against horizontal and vertical sliding. The StandBox system effectively manages your storage space.

Intelligent Flexibility:

You can adapt StandBox easily and quickly to your airplane by using a snap blade knife (recommended blade width is 18mm). Thanks to StandBox's dovetail locks, the whole structure is easily adaptable. The StandBox joining support structure uses round corners which provide greater pressure points within individual the connections. More pressure equals stronger joints!Prism and vertical support make all the connections strong without use of the glue. Because the Standbox system uses no glue it can easily be rearranged at any time.

Included:

• 4x Foam Support Ends (Blue)
• 4x  Foam Bars (Yellow)
• 1x  Neck Strap
• 2x Carrying Straps
• 1x  Shovel
• 10x Clips
• Models are for presentation only and not included!
  

StandBox System Plastic attachment Clip, set of 10

StandBox System Plastic attachment part Blade Shovel

1 pcs

Starter Cone Rubber replacement insert

Color may vary from yellow to white( stock dependent)

Starter Shaft extension with One-way hub, easy insert, Blue color

Steel Shaft securing Circlip, Spring steel for 8mm Shaft Diameter

set of 10 pcs

Steel Shaft securing Circlip,Spring steel for 10mm Shaft Diameter

set of 10 pcs

Large filter with Overflow insert, comes with mountings.

Can be used with Both petrol and Glow fuel

RC Drone Finder Alarm 5V 110dB Super Loud Buzzer Tracker with LED Buzzer Alarm Build in Battery for FPV Drone Quadcopter
The drone buzzer has two modes of operation:

1. It is compatible with the functions of the traditional active buzzer and synchronized with the flight control.

2. When the flight control is normally connected, if the main battery in the flight is powered off, it can still automatically emit 110 dB of drip sound after 30 seconds of power failure, and the LED will emit white light, and the sound is louder than the general buzzer. Much bigger.

How to turn off the buzzer:

Press and hold the release button for more than 2 seconds, the  Finder turns off the sound.

The  Finder is compatible with all BF and CF flight controls.

Just connect to the buzzer interface of the flight controller and it will work. When the flight control wiring is correct, the multi-rotor aircraft is powered on, and the flight control power supply will automatically charge the JHE42B Finder (the red LED will light to indicate that charging is in progress).

Size: 23*17*17MM

Weight:7.4 g

Reinforced heavy duty Servo Arms for Futaba/Savox, those arms are made with Reinforced/composite plastic material

Set of Super Strength Futaba/Savox Servo Arms 25T including:

• 2pcs of L22mm
• 2pcs of L29mm
• 2pcs of L35mm
• 2pcs of L58.5mm
  
  
• Color of arms may vary
  

SUPER TIGRE S61 & X60 PISTON RING

Swash Ball link Set, fits Raptor but also other flybar models

T-Motor style multicopter Carbon Prop 20x5.5, Pair

Product Description

One pair (CW + CCW) 20x5.5″ carbon fibre propellers with 6mm middle hole

• Longer Flight Time
• 100% Balance
• Higher Loaded Ability
• Lightweight / High-strength

Includes:

• 2 x CF Props, 1 x CW, 1 x CCW

 

Folding Propeller 20 x5.5 Inch T-Motor Style

Special design of winglets is employed to weaken the vortex and improve the efficiency.
Downward winglets abates the radial centrifugal tension and deformation quantity.
 
• Special Winglets Design

• Easy to Fold and Spread
• Precise Positioning
• Ideal Flight
 

Material:  carbon fiber

Includes:

• 2 x CF Props, 1 x CW, 1 x CCW

 

We offer hand made pushrods from TITANIUM Grade Medical 3, this is one of the best Titanium materials (produced in europe) you can buy.
the Tread is made by Push technology and not Cut, means there is no weak point at the point where the tread is stopped (different from cut where the point becomes a breaking point)

We use Medical grade 3 Road, and we are able to produce tread per needs. you can contact us for special lengths/treads, in general we can make push-rods up to any length, and treads up to 20mm each side.
Some standard sizes are here, but for custom products- contact us

price is per set of 2 pushrods.

Titanium Knurled Push Rod M3x50mm with Double Sides Counterclockwise Teeth

Set of 1 rod

Titanium Knurled Push Rod M3x70mm with Double Sides Counterclockwise Teeth
Set of 1 rod