AVIZAR

M2.5x10 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M2.5x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M2.5x6 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M3 Nylon Hexagon Machine Nut Black DIN 934 Fastener

Set includes 10 pcs

M3 Nylon Hexagon Machine Nut White DIN 934 Fastener

Set includes 10 pcs

M3x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M3x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M3x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M3x25 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M3x8 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M4x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M4x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M4x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

M4x6 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

The point of the set screw is designed to bear on a mating part

Set of 10 pcs

Male to male Patch cable adaptor, fits All Flybarless systems, Data port , connecting a Futaba S.Bus receiver .Gold plated Futaba connectors

Length+-10cm

0.35mm wire, Brown,Red,Orange

Set of 1

Manual Dual cartridge Dispensing Glue Gun for Glues of 50 mL

DMA51-00-10 is a black/gray manual dispenser. It is designed for use with 50 ml cartridges and will work with 1:2 mix ratio products.

 

MAXI Ball Links M3, Ball Diameter Outside 6,0mm w/h Hole 3,0mm diameter

Nylon Ball Links for large airplanes, large gas powered boats and off-road gas cars.
It is almost impossible to „pop“ the ball out by hand, yet it swivels smoothly in the nylon socket. Nickel-plated ball outside dia.: 6 mm (.24 in.).. M3 mounting hardware

Take the guesswork out of getting your power system optimized with the Mayatech MT10 Pro Thrust Stand and Power Analyzer. This handy tool lets you check out your motor/propeller combinations easily at home without needing to install anything into a model until you've finalized the setup. The stand can handle a wide variety of motors and measure up to 10kg of thrust. High precision linear bearings and thrust sensor give accurate thrust readings down to the gram.

It is also equipped with a power analyzer to measure measure Volts, Amps and Watts. The backlit LCD screen displays the measured parameters in an easy to read format with the thrust value being displayed in a separate screen.

It has been designed to be as robust as possible. All components including the heavy duty base are made from CNC machined aluminum alloy. Holes are provided in the base to secure it to a table or workbench easily.

This is one piece of kit that makes you wonder how you ever managed without it!

Features

Support current display function,can display voltage, current rate, discharging power and discharging time.

LCD display, visible thrust measurement data

Measuring range 0-10kg wide, accurate to 1g

Supports conversion between grams and ounces

Compatible with a variety of batteries, tester power supply is 5 -26v, support xt-60 connector

Compatible with most 16mm/19mm/25mm mounting distance motors. 5mm hollow hole inside the motor base for rear shaft motor

Specification

• Model : MT10 PRO 10KG
  
• Measurement Range : 0-10kg
• Power Input : 5-26v
• Size : 212.5 * 109 * 83.5mm
• Motor Base Size : 16/19/25mm
• Weight : 733g

Package Included

• 1 x 10kg Current Thrust Tester MT10PRO
• 2 x 80*60mm 3MEVA Taper
• 2 x M4*16 Screw

500-700 SIZE will fit all helis in this size.
This handy tool makes it easy to check and set your swash plate alignment at all points of collective travel from full negative to full positive and all points in between. Using the leveler you can easily adjust out most of the interactions inherent in all eCCPM systems.
With this tool and a few moments time your heli will lift straight off on it's maiden flight and will track better through all flight maneuvers!

Waterproof servo with High-precision metal gears with hard anodizing, CNC aluminum middle Shell.

Suitable for: Cars, boat, Airplane, Helicopters.

This steering servo is stable and quick response time, strong, advanced linearity, stable, low noise and waterproof.

Apply Environmental Condition:

Storage Temperature Range: -30℃～80℃

Operating Temperature Range: -25℃～70℃

Standard Test Environment:

Temperature Range: -25℃～70℃

Humidity Range:65%± 10%

Mechanical Specification:

Materials of the gear: Metal Gear

Connector wire length: 320 ± 5 mm

Horn gear spline: 25T/ψ5.9mm

Size:40*20.5*40.5mm

Specification:

Working voltage range:4.8-7.2V

No load Speed: 0.22sec/60° (4.8V)0.18sec/60° (7.2V)

Running current : 160mA (4.8V); 220 mA (7.2V)

Peak stall torque : 28.5 kg-cm (4.8V); 33.8kg-cm (7.2V)

Stall current: 2600mA± 10% (4.8V); 3400mA ± 10% (7.2V)

Control Specification:

Command signal:Pulse width modification

Neutral position: 1500 μsec

Dead band width: 5 μsec

Running degree:180°±3°(when 500-2500μsec)

Pulse width range: 500→2500 μsec

Packing included :

1 set X 30KG 180 Degree Digital Servo,

Set of Servo Horns and hardware.

Metal Pushrod Heavy Duty with Ball link CNC

Ball link is 31mm long

Thread M3

Rod is 65.5mm long

Set of 1 rod+2 Ball links

Dial gauge/indicator a measuring instrument in which small displacements of a spindle or a lever are magnified by suitable mechanical means to a pointer rotating in front of a circular dial having a graduated scale.

its a precision tool that can measure tolerances, circular run out and total runout, straightness,circularity, cylindricity, and much more

Therefore, this instrument becomes a critical part to monitor the quality of product dimensions and any other equipments in the workshop.

This item is incredibly important in Helicopter modelling, but not only, basically in every turning part mounted on the engine, regardless if its Nitro, Gas or others.

Using this tool will allow you to make sure that the clutch bell or Shaft, spindles, and any other turning parts ( excluding Pinions) are perfectly produced and aligned. when engine ior mechanics are turning with high  rpm,even small difference runout can be turned to gigantic vibration, and vibration is known to kill any thing possible around it. we have seen things hapenning, therefore we do strongly advise to use this tool.

FEATURES

1. Large, easy-to-read LCD, digit height 12.5mm
2. With data output
3. Zero setting at any position, mm/inch conversion.
4. Manual ON/OFF(automatic power off is available)
6. Battery: 1PCS 1.5V battery
7. Range : 0-12.7mm
8. Resolution :0.01mm/0.0005"

Micro Parallel Charging Board - Unlimited Flight at Your Fingertips. Safe Parallel Charge Board for mCPX & Pico

One of the best ways to extend your day of flying is multiple batteries, and with this Micro Parallel Charging Board, you can now charge up to (6) Ultra Micro Batteries, and (6) Nano CPX style batteries, allowing you to take flight times to new limits.

Compatible with UMX style batteries found in aircraft like the Blade mSR, and NCPX batteries found in aircraft like the Blade nCPX, this parallel board can charge up to (12) batteries at once, allowing you to spend more time flying, and far less time waiting for your batteries to charge. Further, this micro parallel board is protected by self resettable fuses to prevent shorts when charging batteries in parallel.

Specifications

• Input Charge Connector: Male 4mm Banana Plug
• Output Connector: 6x 1S Female JST-PH; 6x Female Pico
• Wire Type: 18 AWG Silicone Charge Lead
• Max Charge Rating: 1.5A per battery
• Fuse Rating: 1.5A
• Wire Length: 8"

When charging in parallel, it is best to be sure that the batteries being charged are close in overall voltage. Charging multiple batteries that are far out of balance with each other can limit the batteries potential and shorten battery life.

This is a micro switch, to be glued or soldered on small FPV racer. you can use it as a switch for Leds.

Very small size, however not recommended to be used as main switch.

Check drawing for details

General size 6.6x2.7mm, thick is 1mm.  weight 0.1gr.

Mikado GLOGO 690 SX Clutch Aftermarket

Designed and manufactured by Kyle Dahl

Mikado GLOGO 690 SX Clutch Bell Aftermarket

Designed and manufactured by Kyle Dahl

Mikado GLOGO 690 SX Start Shaft Aftermarket-

Designed and manufactured by Kyle Dahl

Designed to refresh your Mikado Vbar (not touch) in nice cool outlook! Carbon Red or Carbon Orange

Usage: For Mikado vbar (Not Touch).TX not included, Carbon Red or Carbon Orange- choose yours.

Feature:

Well protected your transmitter,prevent it from being scratched

Colorful and shiny sticker,make you transmitter more beautiful

Make your TX look different

Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 40 jumper wires in an assortment of colors. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic circuits. They feature connectors at each end which easily attach to the breadboard, connector or equipment, without the need for soldering. Connections are therefore easy to change and move about the breadboard, which is essential during your prototyping phase.
Each wire measures 15cm long and each pack contains 40 different colored wires to make it really easy to identify them. There are 3 different packs available with different connector options, please refer to the information below for details.

• Pack of 40
• Assortment of colors
• 15cm long (each wire)
• Perfect for prototyping and education

Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 40 jumper wires in an assortment of colors. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic circuits. They feature connectors at each end which easily attach to the breadboard, connector or equipment, without the need for soldering. Connections are therefore easy to change and move about the breadboard, which is essential during your prototyping phase.
Each wire measures 15cm long and each pack contains 40 different colored wires to make it really easy to identify them. There are 3 different packs available with different connector options, please refer to the information below for details.

• Pack of 40
• Assortment of colors
• 15cm long (each wire)
• Perfect for prototyping and education

Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 40 jumper wires in an assortment of colors. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic circuits. They feature connectors at each end which easily attach to the breadboard, connector or equipment, without the need for soldering. Connections are therefore easy to change and move about the breadboard, which is essential during your prototyping phase.
Each wire measures 15cm long and each pack contains 40 different colored wires to make it really easy to identify them. There are 3 different packs available with different connector options, please refer to the information below for details.

• Pack of 40
• Assortment of colors
• 15cm long (each wire)
• Perfect for prototyping and education

Mini Brushless Gimbal  for Gopro 2-3-4 models, 2 axis
This gimbal is designed and produced in EU
Very easy to mount with 2 plates, to be mounted in front as FPV or Photo gimbal.
Controller not included.

Mini Camera Board-LED Board designed especially for FPV Racers, quadcopters

• Specially designed for mini multirotors
• Suitable for camera fixing and light DIY on mutirotor, airplane, helicopter, RC etc.
• Board Only - Camera is not included

Specifications:

• Input voltage :3S LiPo Battery
• Size: approx. 38.5 x 38.5mm
• Net Weight: 5g
• Quantity : 1 PC

These miniature bearing shims are a must for ensuring smooth bearing operation. Fitted between the bearing and mounting surface or between bearings to prevent friction and damage of the sealing shields.

Also ideal for the precision adjustment of component positions.

Dimensions:

Internal Diameter - 3.0mm
External Diameter - 4.0mm
Thickness - 0.2 mm

Supplied in packs of 5

These miniature bearing shims are a must for ensuring smooth bearing operation. Fitted between the bearing and mounting surface or between bearings to prevent friction and damage of the sealing shields.

Also ideal for the precision adjustment of component positions.

Dimensions:

Internal Diameter - 3.0mm
External Diameter - 5.0mm
Thickness - 1 mm

Supplied in packs of 10

These miniature bearing shims are a must for ensuring smooth bearing operation. Fitted between the bearing and mounting surface or between bearings to prevent friction and damage of the sealing shields.

Also ideal for the precision adjustment of component positions.

Dimensions:

Internal Diameter - 3.0mm
External Diameter - 5.0mm
Thickness - 2 mm

Supplied in packs of 10