AVIZAR

Input voltage: 4-32V (limit 36V), please reserve the voltage margin.

Output voltage: 1.2-32V continuously adjustable (default output 5V, if you need other voltage please explain to the palm. )

Output current: 0.4-10A long time natural heat dissipation within 6A, temperature does not exceed 60 degrees. When the ambient temperature is high, please reduce the amount of use.

Output constant current range: 0.3-10A
Working temperature: - 40 ~+85 degrees
Working frequency: 150 KHz

Short-circuit protection: with (current limiting constant current value)
Over-temperature protection: there is (automatic reduction of output current after over-temperature)
Input Reverse Connection Protection: No (If necessary, enter diode in series in input)

Installation: 4x 3mm screws
Module size: 60 mm long, 26 mm wide and 20 mm high
Module weight: about 26G
Connection mode: terminal, welding-free, IN as input, OUT as output.

Exhaust gasket sheet materials designed specifically for application in machinery, venting and extraction systems - particularly those used in Petrol or Nitro engine exhausts - need to be able to withstand very high temperatures over extended periods without failing.

Our paper gasket sheet is a cellulose fiber base impregnated with a plasticized chemical treatment to resist: oil, petrol, air, water, alcohol, grease and most solvents.

Oil paper jointing is used for engines, axles, pumps, pipes and tank flange joints. As such it finds application in the automotive, marine, aero and agricultural industries.

• Enables you to build your own infinitely customizable gaskets

The sheet comes in size of 10x10cm, if you need larger sheets, please ask us

the choice of thickness is

0.3 / 0.5 / 0.7 / 1.0mm- choose your thickness

Cut using your Scissors or Knife

Color may vary!

Hubsan/ Losi/ Walkera 2 pin Battery Male Connector with silicone wire 22AWG, 10CM long.
Perfect to make your own battery pack.

Set of 1 wire with connector.

Best to use with drones and many other applications- Flat  Hudy Special Turnbuckle Tool.

This all-in-one tool features 3, 4, 5, 5.5, 7 and 8mm openings, allowing adjustment on a wide variety of nuts

This is the HD version of the ImpulseRC Apex frame and is designed to fit the DJI Digital FPV System.

The Apex shatters the glass ceiling in freestyle frame design.

Through a process of continous refinement and always striving to improve we have created a new breed of freestyle frame. The Apex does not compromise in stiffness or durability, so you never have to choose between confidence and performance.

Unique design elements new to the FPV world make your build and maintenance more simple than ever before. Toughness of the frame itself is increased while also offering much better protection for your investment in flight electronics.

APEX ARM DESIGN
The arms of an FPV frame are the key structural component which translate the thrust from the motors to the majority of the mass in the aircraft, which is secured to the body of the frame. The design of the arms and how they are attached to the body is one of the most vital aspects that influences the performance of an FPV frame.

There are multiple problems which can occur with existing arm designs which can lead to poor performance, difficulty tuning and added cost. The Apex addresses all of these problems with a simple and unique new design that eliminates all arm slop and drastically increases durability.

PERFECTLY SYMMETRICAL
Symmetrical arms make it possible to pocket one side of the part without introducing the need for distinct left and right arms, making you require more spare parts. We use a pocket instead of a hole under the motor to increase durability and we embed a press nut to simplify attachment and avoid clearance issues under your stack.

SIMPLE MAINTENANCE
Flight electronics are mounted to the upper main plate using countersink bolts. This completely decouples the arm attachment from the electronics mounting. Arms can be replaced using two bolts without any disturbance to your stack.

SHOULDER BOLTS AND THREADLOCKER
Our custom machined shoulder bolts act as a solid steel pin through the arm which eliminates slop and tolerance issues. The precision shaft passing through the arm removes all side-loading of the carbon laminations on to the chisel-like threads of a regular bolt. Factory added threadlocker and custom aluminium cone washers spread the load of the clamping force and ensure the bolts will not vibrate loose.

KEY TO THE APEX
At the apex of a masonry arch a keystone locks all the stones in to position and allows the arch to bear weight and be self supporting. A keystone is a hallmark of strength and good design, the Apex FPV frame is no different and the carbon key sits at the heart of the frame to distribute forces applied to the arms.
IF chosen as Combo, you will be delivered the following

Frame kit

• Fc: Kakute F7 DJI compatible
• Motors: 2206 3-4 S Compatible
• ESC 35a
• PRops 6"
• Lipo: 4S 1300-1800 65c

This navigation light is widely used and can be used in any model of sea and land using PWM signal.
 
2. This navigation lamp can be used for racing quad footpad, perfect in place of sponge MATS, with special materials, anti-cracking and toughness. Please treat customers differently. Because of the design of the divergent lamp shade, the player can feel the attitude of flight in multiple angles.

3. there are six functions to choose from, convenient and practical.
 
4. When operating model equipment, the light of the associated rudder will be activated when the control is not affected.
 
5. The equipment supports 2-6s voltage input.
 
6. The navigation lamp control panel is 12V version (imported 3W high brightness light bead).
 
7. This product can automatically identify remote neutral point location. In case of abnormal situation, first check whether the remote control is neutral, then please restart the device without power.
 
8. With the BB sound finder function, the customer needs to cut the buzzer mouth by itself

Cable Ipex converter to SMA/RPSMA( optional adaptor )- sometimes can be delivered with SMA connector 90 degrees for easy installation

Features:

• Name:SMA cable to IPEX
• Interface Type:external screw internal pin
• Cable Length:RG1.13 silver plating

Application Fields:

• WIFI module
• Network card
• Desk computer
• PAD
• Model airplane remote control
• Bluetooth
• Network monitoring
• Wireless camera
• Intelligent household
• Network set-top box
• Wireless router
• Optical
• Interchanger
• Laptop

ISO A4 Countersunk Hex screw M3x10 (10 pcs)

ISO A4 Countersunk Hex screw M3x6 (10 pcs)

ISO A4 Countersunk Hex screw M3x8 (10 pcs)

JR Heavy-Duty Servo Extension 25cm 20AWG 0.5mm2 wire

this wire can be used to extend any servo even mostly current demanding

JR Heavy-Duty Servo Extension 50cm 22 awg wire with servo Lock

The safety clip prevents disconnection of the servo cable.

Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

Set of  Male and Female JST/BEC connectors with Silicone wires, up to 10amps Continuous power.

Wide application: These JST plug connectors are suitable for most mini RC helicopter, FPV, LED strip light and good for connecting motor, ESC battery, etc.

Including Male and Female. Length : +/- 20cm

Your battery too close to the balancer? This is exactly  what you need!
This cable to be used with Lipo balancer, extention of 20cm, fit JST connectors such as Align, Optipower and others.

Fit batteries up to 6S

Long glow tube with cable with switch and indicator LED terminated with crocodile clips. For all engines with standard glow plugs, suitable for RC cars and aircraft engines deeper under cover.

Kavan A1 cutting mat with mat surface. Raster printed on both sides (0-870x0-570mm) with basic angles (15,30,45,105, 120 °) and circle diameters (5-34mm). Suitable for working with break-off or company

Perfect working underlay for cutting of foils, balsa, decal sheets and so on. Imprinted Length-,Wide- and Angle Screen.

The Self-Healing-Effect operates that fine cuttings in the surface area will be closed by itself.

Size 600 x 900 x 3mm

Kingstar 6040 PROPELLER ( CW/CCW) / 10 PAIRS

Beautifull and yet simple design, attractive in price, appealing look. This is the KINGSTAR 260. This set including 2 frame kits , Grren and Red, together with Leds

Features:

1. Polyamide+fibre material, multicolor、strong、light-weight frame.
2. Standard camera holders, the vertical angle is adjustable.
3. Anti-vibration holders for MOBIUS type camera.
4. Power distribution board  with gold PCB made from 1oz copper thickness.
5. High brightness multicolor rear LED with lampshadehousing
 
Package included:

• 2 x Frame set
• 10 x pairs of 6040 propeller
• 2 x High brightness LED
• 1 x Receiver antenna mount

 Specification:

• Frame distance- 260mm
• Frame weight 138g

 Recommended Configuration:

• FC: CC3D\NAZA32\QQ etc..
• MOTOR:2204-2206
• ESC:10-20A with BLHeli or SimonK firmware.  
• PROPELLER:6"
• BATTERY :1300-2200MHA 11.1V
•          1000-1800MAH 14.8V

KingStar 260 FPV landing gear 4pcs

The next evolution of the rotor revolution is here!! The KK-mini is packing all the same power, but with a new mighty-mini form factor.

The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

The KK-Mini added polarity protection to the voltage sense header and on-board buzzer. The voltage sense line has been updated for better accuracy.

If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.

Specs:

• Size: 36x36x11.5mm (mounting holes 30.5x30.5mm)
• Weight: 8.6g
• IC: Atmega644 PA
• Gyro/Acc: 6050MPU InvenSense Inc.
• Auto-level: Yes
• Input Voltage: 4.8-6.0V
• AVR interface: standard 6 pin.
• Signal from Receiver: 1520us (5 channels)
• Signal to ESC: 1520us
• LCD size: 24*18mm
• Mini buttons size:Four 3.3*4.2mm
• Voltage sensor: One red positive pin header for.
• Input rail: Single row 2.54mm pitch pin header for input signal

Simple and easy way to fill the fuel tank of your GAS model of 15cc+
Simply plumb it into the feed line between your fuel tank and your carburettor,

fit the fuel probe to your fuel bottle and you are ready to go.

When you push the fuel probe into the valve it shuts off the feed
to the carburettor and allows fuel to flow to the tank. When the fuel
probe is removed this restores the feed from the tank to the carb,
simple as that, it's also great for emptying the tank as well.

Please keep the fueling probe really clean, if any grit gets on it and you push it into the fueling valve it can get under the seals and cause problems.

Simple and easy way to fill the fuel tank of your nitro model, engines less than 20cc
Simply plumb it into the feed line between your fuel tank and your carburettor,

fit the fuel probe to your fuel bottle and you are ready to go.

When you push the fuel probe into the valve it shuts off the feed
to the carburettor and allows fuel to flow to the tank. When the fuel
probe is removed this restores the feed from the tank to the carb,
simple as that, it's also great for emptying the tank as well.

Please keep the fueling probe really clean, if any grit gets on it and you push it into the fueling valve it can get under the seals and cause problems.

Provide protection for DJI Phantom landing gear
Features:

• Super light weight less than 0.1G
• Landing Gear Protective Set
• Come with inside 3M sticker
• Dedicated for DJI Phantom RC Quadcopter

Landing Skid Nut blue 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Landing Skid Nut FLUO GREEN 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Landing Skid Nut FLUO RED 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Landing Skid Nut FLUO YELLOW 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Landing Skid Nut Red 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Custom made Multicopter based on Sky hero Spyder 6 large scale drone with 6 or 12 motors option. These machines are used to pick up heavy weights. The motors can handle extreme redundancy.
This machine is designed to fly in extreme weather conditions. It is originally made to carry gimbal, however it is very easily converted to carry other objects.
With 12 motors this machine able to pick up extra weight of around 10-12 KG. If this is not necessary, 6 motors is an option.
Machine is delivered fully assembled and test flown.

General specifications

• 6 Arms Multicopter with 6 or 12 motors configured. Diameter of the machine is 1 meter.
• Motor type 4014 T-motor or Avizar, with metal motor arms.
• 6/ 12 esc 50 amps 6s with special software for multicopter use.
• Propellers 15-16", depends on configuration.
• Flight controller: DJI Wookong or A2.
• Gimbal- 3 axes brushless, able to accomodate 99% of Midi SLR- Full SLR  cameras, with autonomous controller(can be used separate as cameraman).
• Video transmitter - On demand
• Lipo battery 6s 12000-30000mah
• FPV camera installed together with the main camera to allow full visibility of live stream on the ground.
• Radio control- Futaba SG14(as option)

See the options availaible. The product can be further customised based on your wants and needs.

Linear Regulator 4S LiPo to 12V 300mA (1pc)

• Suitable for FPV Camera
• Compared with BEC12V, linear voltage regulator with low-ripple, does't interfere the image signal
• Temp. 25℃, 16V input, 12V output 300mA, 5min, the highest measured temperature is 58℃
• Can be connected with extra only one 12V 1.5W LED light.
• If the 3S and 4S mixed, it support 3S battery too. Output voltage=3S voltage-1V, eg. the battery voltage is 12V, actual output is 11V, and the camera can work normally.

Description:

• Item Name: Linear Voltage Regulator
• Input Voltage:13~17V, 4S LiPo
• Output Voltage: 12V,  accuracy 2.5%
• Output Current: Continuous 300mA
• Size: 25*10*3mm
• Weight: 1g

Lipo Balance male-male EXTENSION Connector XH 6s, 30cm

its made with wire 22AWG

Your battery too close to the balancer? This is exactly  what you need!
This cable to be used with Lipo balancer, extention of 25-30cm, fit EX connector type (Robbe, graupner, etc.. lipos)

Fit Lipo and connectors 6S EH

RC lost Airplane/helicopter/drone  finder Alarm.

• Connect the alarm between the servo and the receiver, i.e. act as a servo extension cord.
• Turn on your TX. and you will hear 2 x beep sound.
• Do not move any of the control stick on the TX or simply turn off the the TX. You will hear a continuous beep sound after 1 minute. It will stop once u turn on your TX or move the control stick.
• If you ignore the continuous beep sound for around 2minutes, the beep sound will change the a louder V sound.
• You need to disconnect the alarm from the receiver in order to switch of the alarm.

Specifications:

• RC Radio Control  Lost Finder Tracker
• Suitable Controller: All PPM/FM, PCM/FM, AM Tx/Rx
• Loud >85dB alarm gets your attention
• Two alarm tones pattern
• Works with AM/FM PPM or FM/PCM R/C systems
• Plugs into any standard servo channel
• Operating Voltage(v) : 4-6v
• Current Drain(mA) : 1-35
• Can be heard in 50 meter distance

How to set up

1. 1. Connect the lost alarm between the servo (the one which runs when flying) and the receiver, i.e. act as a servo extension cord
2. 2. Turn on your transmitter
3. 3. Turn on your receiver then you will hear two beep sound
4. 4. To test if it is functioning:
5. Do not move any of the control stick on the transmitter for 1 min. or simply turn it off
6. You will hear a continuous beep sound after 1 minute
7. If you ignore the continuous beep sound for around 2 minutes, the beep sound will change to a louder V sound
8. It will stop once you move the control stick or power off the receiver
9. 5. If you cannot find you plane, do not move the control stick or turn off your transmitter for 1 min for the alarm sound
10. 6. By the tracking sound, you will be able to locate your RC plane / Helicopter
11. 7. To stop the alarm : Move the control stick or Power off the receiver
12. Can be connected to any kinds of servo
13. Should be connected to the servo that runs when flying

Low Profile Nyloc motor Lock Nut black M5 (2x CW & 2x CCW)