Narrow, light and with very good spinning characteristics. The deep groove ball bearing 6902-2RS is narrow and can also be used with limited space.

Abec-5, stainless steel

1 bearing

Radial ball bearing R2-5ZZ
Specially used in motors with 3.17mm shaft
Size: 0.125X.3125X.1406 inch
 

Radial ball bearing R2-ZZ
Specially used in motors with 3.17mm shaft
Size: 0.125x0.3750x0.1562 inch
 

ABEC-5 Radial Japanese Bearing 30x37x4. 6706ZZ

Including: 1 bearing

Single Row Deep Groove Sealed Ball Bearing 6x13x5mm 686VV Non Contact Seals (Contactless)

Can be Metal or Rubber seal

1 ball bearing

Single Row Deep Groove Sealed Ball Bearing 6x15x5mm 696VV Non Contact Seals (Contactless)

Can be Metal or Rubber seal

1 ball bearing

Stainless Steel ABEC-5 Ball Bearing 17x30x7 #6903

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Set include 1 Hybrid ceramic bearing.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.

The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Included 1 ball bearing

Stainless Steel Si3N4 9.525 x 22.225 x 7.14 mm Ceramic hybrid ball Bearing #R6ZC

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment.

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 2500 plus degrees F. extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Shield color/material may vary

Set of 1 ball bearing included.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Stainless Steel Si3N4 Hybrid Ceramic Ball Bearing 10X26X8 6900C

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing

Hybrid ceramic bearing with steel cages and ceramic balls Si3N4 17x30x7 #6903C

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearing

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.

The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. 3N. 4 (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

6203 2RS
Dimensions : 17x40x12mm
Bearing Material : Stainless steel
Ball material : Si3N4
Sealing: both side sealed 2RS
Abec Rating : Abec -5

Delivery scope: 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.

The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. 3N. 4 (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Dimensions : 17x47x14mm
Bearing Material : Stainless steel
Ball material : Si3N4
Sealing: both side sealed 2RS
Abec Rating : Abec -5

Delivery scope: 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set includes 1 Hybrid ceramic bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

This is Ceramic Hybrid Ball bearings set. Its made to fit to OS 140RX

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

This is Ceramic Hybrid Ball bearings set. Its made to fit to Helicopter engines : OS 40/46/50/55- Thunder Tiger 40/46/53 Redline & Pro - Magnum 40/46, YS 50-56

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

This set is to be used on Helicopter engines : OS 61 SXH - OS 70 SZ-H - OS 91 FX/ SZ/C-SPEC - Thunder Tiger 61 & 90 Pro -YS 80 , YS 91ST, YS 91 SR, 120,96 , Magnum 61/ 90

Those bearings might fit other engines as well-so check your motor specifications, if not sure, ask us

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

This set is to be used on Helicopter engines :Webra 75/91. please also check your motor specifications, the bearings might fit other engines as well

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

This is Ceramic Hybrid Ball bearings set. Fits those models and all modified variants

• Zenoah G240RC,
• Zenoah G270RC,
• Zenoah G290RC,
• Zenoah G260PU,
• Zenoah G231PUH,
• Zenoah G260PUH

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

Steel Metal Shielded Thin-Section Radial ball bearing 25x37x7

ABEC 5 bearings are equipped with grade 5 bullets at military level and are therefore excellent for use in precision applications.

These bearings have been treated with a high quality Teflon lubricant (Rheolube 374A) to ensure that they run even smoother.

Most ABEC 5 bearings feature SRS seals, which can be disassembled for quick and easy maintenance. The low rolling resistance and good sealing against moisture and dirt are guaranteed.

Thrust bearing F10-18M-M is small and suitable for installations with limited space and on thin shafts. It absorbs loads from an axial direction and can be dismantled.

scope of delivery:

1 set of Thrust bearing 10x18x5.5

Thrust ball bearings are designed to hold axial loads produced during shaft rotation and must not be exposed to any radial loads. These bearings consist of two strong and ground thrust plates with matching ball grooves on one side and 1- piece brass cage that contains the identical balls.

• Type: Thrust Ball Bearing
• Size:12mm x 23mm x 7.5mm
• Quantity: One Bearing
• Dynamic load :47 kN

Lubrication of Thrust ball bearings

Metal upon metal contact produces large amounts of friction and stress in the metals. This friction usually adds to the premature wear and tear of the metal while slowly degrading it. To reduce friction, prevent wear and protect bearing surfaces from corrosion lubrication of bearings is really important. It is also cost-effective and easy to apply by maintenance professionals.

Why choose a steel ball bearing?

Steel is perfect material for ball bearings because it provides strength and reliability as well as being corrosion resistant. Steel ball bearings are suitable for installing due to low maintenance and long durability.

THRUST BEARING 3x8x3.5. Set of 1 bearing