Suitable for T-REX 450SE/SPORT to install 450DFC Main Rotor Head Upgrade Set (H45162/H45162QN)

Specification:

• 450DFC main shaft(SE) × 2(5x112mm)
• Socket collar screw × 2(M2x12mm)
• M2 Nut × 2(M2)
• Main shaft spacer × 1(5xΦ9x6mm)
• M3 Set screw × 2(M3x3mm)
• Weight:33g

This is an Align 104T M0.6 Autorotation Tail Drive Gear Set, intended for use with the T-Rex 450 & 470L Helicopters.

Specification:

• Use for T-REX 450-470L

Must use with:

• Torque Tube Front Drive Gear Set / 28T M0.6 (H45G001NXT)

Content:

• 2x Auto rotation tail drive gear - Black

 

T-Rex 450L / PRO M0.6 Torque Tube Front Drive Gear Set/26T

Specification:

•     Use for T-REX 450L / PRO
•     Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear.
•     Effectively minimize gear striping and crash damage.

Must use with:

    - 104T M0.6 Autorotation Tail Drive Gear set (H45G005XXT)

Align T-Rex 470L Feathering Shaft Bearing Washer

Use for:

• T-REX 470L

Content:

• 6x Washer (7.5x10x0.5mm)

 

Use for:

• T-REX 470L

Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.

Content:

• 470L Head Damper x 4(F5xF10x4mm)
• 470L Damper Aluminum Sleeve x 2(F5xF7.5x0.9mm)

Align T-Rex 470LM Dominator Super Combo

This is the all new T-Rex 470LM from Align, with all the best and optimal feature of a small size T-Rex model:

• Brand New Belt Drive  Assembly
• Brand New 470EFL Main Rotor Head Set
• Support 380 Main Blade / 69 Tail Blade
• Progressive Landing Skid with 5 degree tilted forward
• New DS450M/DS455M High Voltage Brushless Servo
• New RCE-BL50X Brushless ESC
• New 3rd Main Shaft Bearing Block design
• Brand New Tail Rotor Holder

Align T-Rex 470LM Metal Upgrade Set

Use for:

• T-REX 470L

Precision Metal Manufacturing, Beauty in Both Form and Function
Bearings not included.

Content:

• 470 Main Rotor Housing x 1
• 470 Main Rotor Holder x 2
• 450EFL Metal Control Arm x 2
• 470 Main Shaft Bearing Block x 2
• 450L Frame brace(L) x 1
• 450L Frame brace(R) x 1
• 470 Frame Mounting Bolt x 1
• 470 Metal Tail Drive Belt Pulley Assembly x 1
• 470 Tail Belt Unit x 1
• 450 Metal I-shaped Arm x 1
• 450 Mount Link x 2
• 470 Tail Rotor Holder x 2
• 470EFLLinkage Ball A(M2x2.5) x 2(F2x9.35mm)
• Linkage Ball A(M2x2.5) x 1(F4.75x7.18mm)
• Socket button head screw x 4(#0-80x4mm)
• Socket button head screw x 6(M2x6mm)
• Socket button head screw x 4(M2x5mm)
• Socket button head screw x 1(M2x12mm)
• Socket button head screw x 2(#0-80x4mm)
• Socket button head screw x 2(M2x4mm)
• Socket screw x 2(M3x17mm)
• Socket screw x 4(M2.5x6mm)
• Socket screw x 2(M2x6mm)
• Socket screw x 2(M2x10mm)
• Cross screw x 3(M2x6mm)

Align T-REX 470LP Dominator KIT

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Aligns most anticipated helicopter release in 2016 the T-REX 470L is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw.
This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to 8.4V, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Main Drive Pulley: 56T
• Tail Drive Gear: 15T
• Drive Gear Ratio: 11:1:3.73
• Weight (w/o battery): 840g

Content:

• 1x T-REX 470LP DOMINATOR Kit
• 2x 380mm Carbon Fiber Blade
• 2x 69mm Carbon Tail Blade
• 1x 470MX Brushless Motor (1800KV)
• 1x RCE-BL50X 50A Brushless ESC

Required for assembly:

• 1x Transmitter (6-channel or more,helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 1400~1900mAh battery
• 1x Flybarless System
• 3x Swashplate Servo
• 1x Tail Servo

Align T-REX 470LP Dominator Super Combo

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Aligns most anticipated helicopter release in 2016 the T-REX 470L is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw.
This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to 8.4V, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Main Drive Pulley: 56T
• Tail Drive Gear: 15T
• Drive Gear Ratio: 11:1:3.73
• Weight (w/o battery): 840g

Content:

• 1x Align T-Rex 470LP Dominator Kit
• 2x 380 Carbon Fiber Blade
• 2x 69 Carbon Tail Blade
• 1x RCE-BL50X 50A Brushless ESC
• 1x 470MX Brushless Motor (1800KV)
• 3x DS450 Digital Servo
• 1x DS455 Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V LiPo 1400~1900mAh

 

Align T-REX 470LT Dominator Combo

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Align's most anticipated helicopter release in 2016 the T-REX 470LT is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470LT will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470LT has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a new torque drive assembly, highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470LT is equipped with the large outer diameter 470MX motor (1800KV/2818) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, improving the servos torque and speed.
The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.
T-REX 470LT is designed with 380mm main blade and torque drive system, which makes it more stable and more powerful.
Its superior tail lock performance and flying control feel is super and way beyond your imagination.

Features:
New 470 canopy features in aerodynamic design with durable fiber lightweight material providing the best protection in flight.
The new canopy, its enlarge clean-cut outfit makes the overall body shape more balance and stylish.
Extended 380mm main blades effectively improve the flying stability and power performance.
The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight.
New 69 size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.
Brand new 470 V2 Main Rotor Holder allow to provide the best stability and precise control no matter you are flying in static flight or 3D dynamic flight.
Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from 5mm to 6mm, while the Feathering Shaft outer dimension increased from 4mm to 5mm,effectively strengthening the Main and Feathering Shaft while improving durability.
New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
470MX motor is designed for 3D flight.
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.
Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame.
This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.
Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.
Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.
DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.
Highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The new high intense Torque Tube allow to reduce gear abrasion and extend the gear lifetime value in extreme flight dynamics.
Landing skid is tilted 5 degrees forward to improve crashworthiness.
Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.
A wider Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.
Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.
The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Autorotation Tail Drive Gear: 104T
• Tail Drive Gear: 28T
• Drive Gear Ratio: 11:1:3.71
• Weight (w/o battery): approx. 871g

Content:

• 1x T-REX 470LT DOMINATOR Kit
• 2x 380mm Carbon Fiber Main Blade
• 2x 69mm Carbon Fiber Tail Blade
• 1x 470MX Brushless Motor (1800KV/2818)
• 3x DS450M Digital Servo
• 1x DS455M Digital Servo
• 1x RCE-BL50X 50A Brushless ESC

Required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V Li-Po 1400mAh~1900mAh
• 1x Battery Charger

Align T-REX 470LT Dominator Super Combo

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Align's most anticipated helicopter release in 2016 the T-REX 470LT is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470LT will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470LT has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a new torque drive assembly, highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470LT is equipped with the large outer diameter 470MX motor (1800KV/2818) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, improving the servos torque and speed.
The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.
T-REX 470LT is designed with 380mm main blade and torque drive system, which makes it more stable and more powerful.
Its superior tail lock performance and flying control feel is super and way beyond your imagination.

Features:
New 470 canopy features in aerodynamic design with durable fiber lightweight material providing the best protection in flight.
The new canopy, its enlarge clean-cut outfit makes the overall body shape more balance and stylish.
Extended 380mm main blades effectively improve the flying stability and power performance.
The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight.
New 69 size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.
Brand new 470 V2 Main Rotor Holder allow to provide the best stability and precise control no matter you are flying in static flight or 3D dynamic flight.
Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from 5mm to 6mm, while the Feathering Shaft outer dimension increased from 4mm to 5mm,effectively strengthening the Main and Feathering Shaft while improving durability.
New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
470MX motor is designed for 3D flight.
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.
Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame.
This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.
Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.
Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.
DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.
Highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The new high intense Torque Tube allow to reduce gear abrasion and extend the gear lifetime value in extreme flight dynamics.
Landing skid is tilted 5 degrees forward to improve crashworthiness.
Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.
A wider Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.
Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.
The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Autorotation Tail Drive Gear: 104T
• Tail Drive Gear: 28T
• Drive Gear Ratio: 11:1:3.71
• Weight (w/o battery): approx. 871g

Content:

• 1x T-REX 470LT DOMINATOR Kit
• 2x 380mm Carbon Fiber Main Blade
• 2x 69mm Carbon Fiber Tail Blade
• 1x 470MX Brushless Motor (1800KV/2818)
• 3x DS450M Digital Servo
• 1x DS455M Digital Servo
• 1x RCE-BL50X 50A Brushless ESC
• 1x MICROBEAST Plus Flybarless System

Required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V Li-Po 1400mAh~1900mAh
• 1x Battery Charger

This is a replacement Align Main Shaft, suited for use with the T-Rex 500X helicopter.

Includes:

• 500X Main Shaft x 2
• 8.1x12x0.3mm 500 Pro Main Shaft Spacer x 1
• 8.1x12x0.5mm 500 Pro Main Shaft Spacer x 1
• Main Shaft Lock Ring x 1
• 2.5mm Nylock Nuts x 2
• 2.5x16mm Socket Collar Screws x3

This is a replacement Align 31 Tooth, M0.6 Torque Tube Front Drive Gear Set. These gears are compatible with 500E and 500ESP models.
Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Specification:

• 500 Front drive gear assembly x 1
• 500 Long umbrella gear x 1

Use for T-REX 500

Stabilizer mount(Upper) x 1

Stabilizer mount(Lower) x 1

3K carbon vertical stabilizer x 1

Socket button head collar screw x 2(M2.5x16mm)

Socket button head collar screw x 2(M2.5x10mm)

M2.5 specialty washer x 4(2.5x6x2mm)

For T-rex 500

Tail drive belt(541T) x 1(40x3.65mm)

Replacement part for the Align T-Rex 500.

Align t-rex 500- XT freewheel housing H50g011

 
Item Description

Use for T-REX 500E PRO / 500EFL PRO

Specification

• Landing skid x 2
• Weight:38.7g

Utilizes dual point attachment design for zero play and higher precision control feel

Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more precise and smooth

6061-T6 Aluminum alloy material and CNC processed

Use for T-REX 500ESP

Specification:

I-shaped Arm × 1

Mount Link × 1

Metal plate(R) × 1

Bearing 684ZZ C0 × 1(Φ4xΦ9x4mm)

Bearing holder × 1(11.5x9x12.5mm )

Linkage ball A(M2x3.5) × 1(Φ4.75x8.18mm)

Bearing mount washer × 1(Φ6x Φ7.4x3mm)

Bearing FMR52ZZ × 6(Φ2xΦ5xΦ6x2.3mm)

Bearing MR106ZZ × 2(Φ6xΦ10x3mm)

Socket button head screw × 6(M2x4mm)

Slider Shaft (M6) × 1(Φ4xΦ4.7x15.7mm)

Align T-Rex 500L Aluminum Hexagonal Bolt

6061-T6 Aluminum alloy material and CNC processed

Specification:

• Aluminum hexagonal bolt(M2.5x42.8mm) x 4

Use for T-REX 500L

Align T-Rex 500L Battery Mount

Specification:

• 500L Battery mount x 2

Use for T-REX 500L

Align T-Rex 500L Brushless ESC Mounting Plate Set

Specification:

• 500L Brushless ESC Mounting Plate Set x 1
• Socket button head self tapping screw x 4(T2.6x6mm)

Use for T-REX 500L

Align T-Rex 500L Canopy Mounting Bolt

6061-T6 Aluminum alloy material and CNC processed.

Specification:

• 500L Canopy mounting bolt x 2(M2.5x30.1mm)
• 500PRO Canopy mounting bolt x 2(M2.5x25.3mm)
• M2.5 set screw x 2(M2.5x12mm)
• Socket botton head screw x 2(M2.5x6mm)

Use for T-REX 500L

Align T-Rex 500L Carbon Bottom Plate/1.6mm

Specification:

• Carbon bottom plate x 1(1.6mm)

Use for T-REX 500L

Align T-Rex 500L Carbon Fiber Main Frame (L)/1.6mm

Utilizes composite material integration technology on carbon side frame plates
Also adding battery mounting rails and top mounted motor base design make assembly easy.

Specification:

• Carbon Fiber Main Frame(L) x 1(1.6mm)

Use for T-REX 500L

Align T-Rex 500L Carbon Fiber Main Frame (R)/1.6mm

Utilizes composite material integration technology on carbon side frame plates
Also adding battery mounting rails and top mounted motor base design make assembly easy.

Specification:
 

• Carbon Fiber Main Frame (R) x 1(1.6mm)

Use for T-REX 500L

Align T-Rex 500L Dominator Frame Mounting Bolt

Specification:

• 500L Aluminum Frame Mounting Bolt x 4(2.5x47mm)

Use for T-REX 500L

Align T-Rex 500L Frame Mounting Block

6061-T6 Aluminum alloy material and CNC processed.

Specification:

• 500L Frame Mounting Block x 3
• Socket Screw x 6(M2.5x6mm)
• Socket botton head Screw x 2(M2.5x6mm)
• Socket Screw x 4(M2.5x8mm)
• Washer x 4(D2.6xD5.8x0.6mm)

Use for T-REX 500L

Align T-Rex 500L Gyro Mount

Specification:

• 500L Gyro mount x 2
• Socket button head self tapping screw (T2.6x6mm) x 4

Use for T-REX 500L

Align T-Rex 500L Linkage Ball Assembly

Specification:

• 4.7 Linkage ball B(M2.5x3) x 1 (4.75x25.25mm)
• 500 Linkage ball B(M2.5x3) x 2 (D4.75x9.77mm)
• 500 Linkage ball A(M2.5x3.5) x 2 (D4.75x8.18mm)
• 4.7 Linkage ball E(M2.5x2.5) x 2 (D4.75x11.5mm)
• Linkage ball A(M2x3.5) x 1 (D4.75x8.18mm)
• Linkage ball C(M2x4) x 1 (D4.75x13mm)

Use for T-REX 500L

Align T-Rex 500L Linkage Rod (A) Set

Specification:

Arm B x 2(M2x36mm)
Ball Link x 4

Use for T-REX 500L

Align T-Rex 500L Main Rotor Housing

6061-T6 Aluminum alloy material and CNC processed.

Specification:

• 500FL Metal main rotor housing x 1
• 500 Feathering shaft sleeve x 1
• Damper rubber x 2(D6xD11x4mm)
• Spacer x 2(D6.1x(D10.5x1.5mm)
• Socket collar screw x 1(M2.5x16mm)
• M2.5 nut x 1

Use for T-REX 500L

Align T-Rex 500L Metal Shapely Reinforcement Plate And Brace Assembly

Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame,
under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.

Specification:

• Shapely Reinforcement Brace (R) x 1
• Shapely Reinforcement Brace (L) x 1
• 500L Front Frame Mounting Bolt x 1(M2.5x47mm)
• Socket Screw x 4(M3x8mm)
• Socket Screw x 2(M2.5x8mm)

Use for T-REX 500L

Align T-Rex 500L Motor Mount

6061-T6 Aluminum alloy material and CNC processed.

Specification:

• 500L Motor mount x 1
• Socket screw x 4(M3x8mm)

Use for T-REX 500L

Align T-Rex 500L Tail Boom Case

Specification:

• Tail boom mount(Left) x 1
• Tail boom mount(Right) x 1
• Aluminum hexagonal bolt x 4(M2.5x42.8mm)

Use for T-REX 500L

Align T-Rex 500L/500 PRO DFC CCPM Metal Swashplate

Specially designed for both DFC and FL flybarless rotor head system, improving linkage rod connection strength and minimizing detachment during extreme flight maneuvers.
6061-T6 Aluminum alloy material and CNC processed.

Specification: 

CCPM metal swashplate set × 1

1. D4.7 Long Linkage ball (M2.5x3) × 1(4.75x25.25mm)
2. Long Linkage ball (M2.5x3) × 1(4.75x24.59mm)
3. Linkage ball B (M2.5x3) × 2(D4.75x9.77mm)
4. Linkage ball A (M2.5x3.5) × 2(D4.75x8.18mm)
5. D4.7 Linkage ball E (M2.5x2.5) x 2(D4.75x11.5mm)