Aluminum alloy material and CNC processed

Use for T-REX 450 PRO.

Specification:

450 PRO Metal rudder servo mount x 1(40.7x26x22.7mm)

Socket button head screw x 4(M2.5x6mm)

Socket button head screw x 4(M2.5x8mm)

Apply for RCM-BL500MX Motor

Specification:

500MX Motor Shaft x 1(4.8x5x67mm)
Bearings 695ZZ x 1
Bearings MR95ZZ x 1

Align Multicopter M480L / M690L 7 Inch Main Rotor props BLACK

The highly rigid industrial grade fiber composite plastic main rotors are quiet and aerodynamically efficient.

Specification:

• 7 Inch Main Rotor (clockwise)×2
• 7 Inch Main Rotor (counter clockwise)×2

Suitable for M480L / M690L

Align Multicopter M480L / M690L 7 Inch Main Rotor props WHITE

The highly rigid industrial grade fiber composite plastic main rotors are quiet and aerodynamically efficient.

Specification:

• 7 Inch Main Rotor(clockwise) ×2
• 7 Inch Main Rotor(counter clockwise) ×2

Suitable for M480L / M690L

Align Multicopter M480L / M690L 7.5 Inch Main Rotor props BLACK

The highly rigid industrial grade fiber composite plastic main rotors are quiet and aerodynamically efficient.

Specification:

• 7.5 Inch Main Rotor(clockwise) ×2
• 7.5 Inch Main Rotor(counter clockwise) ×2

Suitable for M480L / M690L

Align Multicopter M480L / M690L 7.5 Inch Main Rotor props WHITE

The highly rigid industrial grade fiber composite plastic main rotors are quiet and aerodynamically efficient.

Specification:

• 7.5 Inch Main Rotor(clockwise) ×2
• 7.5 Inch Main Rotor(counter clockwise) ×2

Suitable for M480L / M690L

Align Multicopter M480L / M690L Black-Retract

Instruction: 

• Suitable for M480L / M690L.
• Must With M480 Landing Gear Tube Mount (M480022XXW) / M690 Landing Gear Tube Mount (M690002XXW)
• Brand new high voltage brushless servo equipped new CNC machined aluminum case, not only exhibited top of the line servo aesthetics, but also combine heat sink function and best protection for the servo.

Specification:

• Input Voltage: DC 8.4-12V
• Operating Temperature: -10°C ~ +50°C
• Time of Retracting: 12V/4s
• Retract Angle: 63°
• Dimension: 73.8 x 40 x 31mm
• Weight: Approx. 74.9g

Content:

1. Retract - Black x 1

Use for T-REX 700 Nitro Pro.

Includes:

• (1) CNC Main Drive Gear/115T
• (1) M1 Auto rotation tail drive gear/104T
• (1) M1 Engine gear /14T
• (1) M1 Front drive gear assembly
• (1) Short umbrella gear/24T
• (1) 700N Clutch nut

Use for T-REX 700 Nitro Pro.

Includes:

• (1) CNC Main Drive Gear/115T
• (1) M1 Auto rotation tail drive gear/104T
• (1) M1 Engine gear /14T
• (1) M1 Front drive gear assembly
• (1) Short umbrella gear/24T
• (1) 700N Clutch nut

This is a replacement Align Clutch Liner, and is intended for use with the Align Nitro helicopter.

Clutch liner x 2 (1x10x160mm)

One-way Bearing For T-rex 550 / 600 / 600N

INA Made in Germany

This is a pack of two optional Align 1.6mm One-Way Shaft Collars. These one-way bearing shaft collars improve main gear rotation efficiency and precision, reducing main gear vibrations and noise. For use with the T-REX 450 series helicopters.

Included:

• One-way bearing shaft collar x 2(6x8x1.6mm) x 2

For T-rex 500

One-way bearing shaft x 1(Φ7xΦ12.6x27.25mm)
Washer x 1(Φ10xΦ13x0.8mm)

Align PCU Update Connector HEBPCU02.
Suitable for ALIGN PCU Power Control Unit. Through connecting with PC interface, customers and pilots can update their Power Control Unit (PCU) system at ease.

Align Radius Arm New T-Rex 600 set of 2 pcs # H60165

Align RC 55H Engine made in Japan and suitable for superior 55 size helicopter.

Features:

• 40L dual needle carburetor, makes the adjustment much more precisely.
• Delivers more horsepower for higher rotor speeds.
• Brand new crankshaft design. Increase the efficiency of intake/exhaust and makes the power stronger.
• Besides good looks and excellent cooling, this engine is machined blue alumite heat sink head also boosts combustion efficiency for more power stability.
• Same size connector to the mount and the muffler as what Align 50 Hyper engine has,Maximize the efficiency when operating with ALIGN 50 High Performance Muffler.

Specifications:

• Displacement:8.93cc (0.55 cu.in.)
• Bore:23mm (0.91 in.)
• Stroke:21.5mm (0.85 in.)
• Practical rpm range:2000-20000 rpm
• Output:2.1hp/17000rpm
• Weight:408g (14.40 oz.)

Includes:

• OS#8 glow plug x1
• 40L carburetor x1

Align RCE-BL100A Brushless ESC

Instructions:

• 32-bit fast-speed processor.
• High quality MOSFET.
• Adjustable BEC function, supply power to receiver and servos.
• Superior governor feature.
• Support 730MX Brushless Motor, Extreme 3D Flight.
• Support USB interface to PC for firmware updating.

Specification:

• Supporting input voltage: 3~6S Lipo / 11.1V~22.2V
• Continuous current: 100A
• Surge current: 170A
• BEC output voltage: 5~8V
• BEC output current: Continuous 10A / Surge 25A
• Size: 78.5x38.1x21mm
• Weight: 138g

Accessories:

• 100A Brushless ESC x 1
• Brushless ESC Fan x 1

ALIGN RC Helicopter is one of the leading 3D RC Helicopter companies in the world. Align stands atop in 3D design and performance. The high quality electronics and design leaves nothing left to wish for. Best known for their T-REX 3D helicopters, the T-REX is one of the top brands in the international 3D helicopter scene, with a 3D heli for every class.

This is a replacement Align Servo arm Set, and is intended for use with the Align DS150/155 T-REX 150 Servo.

Linkage rod G x 4(1.96x61mm)
Linkage rod E x 2(1.96x32mm)
Tail linkage rod A x 1(1.96x197mm)

Specifications:

This is a replacement Align 6mm Super Starter Shaft, and is intended for use with the Align Super Starter system. This is the shaft only, and does not include the starter shaft spinner adaptor

Align starter Spinner Cup (For Airplane)

Airplane Spinner Cup x 1

Starter Rubber x 1

Starter shaft O-Ring x

Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.

• Suitable for up to 50cc gasoline engine or 300 class nitro engine.
• Designed for user replaceable, common 450 heli sized 3S1P 1900~2300mAh/16c lipo batteries.
• Fully charged battery is capable of 500 starts and beyond. Battery packs are charged with any T-REX 450 battery chargers.
• Starting adapter includes double one way bearing design.
• High efficiency motor providing high starting power, and low reacting force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery under-voltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.

Colors available are yellow and black, May vary depends on the stock

Battery not included:

Battery needed is :3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transport ease.
Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.

• Suitable for up to 50cc gasoline engine or 300 class nitro engine.
• Designed for user replaceable, common 450 heli sized, 3S1P 1900~2300mAh/16c lipo batteries.
• Fully charged battery is, capable of 500 starts and beyond.
• Battery packs are charged with any, T-REX 450 battery chargers.
• Starting adaptor includes double one way bearing design.
• High efficiency motor providing high starting power, and low reacting, force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery undervoltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.
• Suitable battery:Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
• No load rotation speed:2300rpm
• Battery undervoltage:10.8V
• Quiescent current:0 mA
• Motor overheat protection:80°C
• Decelerate gear ratio:5.3:1
• Size:80x60x390mm
• Weight:700g (w/o battery)

Accessories:

• Starter body x 1
• Helicopter Starter Shaft x 1

Option:

• Battery:3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

This is the Align Airplane Super Starter. This convenient lightweight hand starter runs off LiPo battery power and features a simple one button start. Built into the starter are many smart electrical safety securities to keep you and your equipment safe, while an included case keeps the starter safe in storage. The charger is suitable for 50cc engines or 300 class nitro engines.

• Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.
• Suitable for up to 50cc gasoline engine or 300 class nitro engine.
• Designed for user replaceable, common 450 heli sized 3S1P 1900~2300mAh/16c lipo batteries. Fully charged battery is capable of 500 starts and beyond.
• Starting adaptor includes two piece one way bearing design.
• High efficiency motor providing high starting power, and low reacting
• force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery undervoltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.

Specifications:

Suitable battery: Li-Po 3S1P 11.1V 1900~2300mAh 16C and above (maximum size 112x35x24mm)
No load rotation speed: 2300rpm
Battery undervoltage: 10.8V
Quiescent current: 0 mA
Motor overheat protection: 80°C
Decelerate gear ratio: 5.3:1
Size: 80x60x390mm
Weight: 700g (w/o battery)

Includes:

• (1) Starter body
• (1) Airplane starting adapter

Requires:

Battery: 3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

Specifically designed for 550-800 class helicopters, this swash-plate leveler allows for precise swash-plate level adjustment, improving helicopter hover stability and flight performance.

Tailored specifically for Align swash-plate designs, utilizing CNC alloy metal for pleasing aesthetic and functionality.

Use for T-REX 550/600/700/800 all class machine.

Specification:

Swashplate unit corrector × 1 Collar × 1 (D13.5xD10x20.5mm) M3 Set screw × 1(3x3mm)

Description:

• 6061-T6 Aluminum alloy material and CNC processed
• Use for T-REX 700E / 700E F3C / 700N
• Use with 700 New Designed Main Rotor Head Assembly HN7114A

Content:

• Metal SF mixing arm x 2
• Socket button head screw (M3x12mm) x 2
• Linkage ball C (M3x3.5) (5x8.5mm) x 4
• Bearing 683ZZ (3x7x3mm) x 4
• Mixing arm bearing Collar (3x4.8x1.5mm) x 2
• Washer (3x4.8x0.3mm) x 4

Description:

• Use for T-REX 800 / 700 Nitro Pro / 700E
• Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
• Must use with:
  • 700 Metal Tail Rotor Holder (H70T001XXT/H70T001AXT)

Content:

• 1x Tail rotor shaft assembly
• 1x Long umbrella gear

Description:

• Suitable for T-REX 700 / 800
• The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab reinforcement and rotation smoothly, but also avoid the scratches from the rotor holder rubbing against painting surface of blade causing expected vibration in flight.

Content:

• 8x 700 Main Blade Clips
• 8x 700 Tail Blade Clips

Description:

• Use for T-REX 700E

Content:

• Linkage rod (A) x 2 (1.96x14mm)
• Linkage rod (B) x 2 (1.96x22mm)
• Linkage rod (C1) x 2 (1.96x56mm)

Description:

• Use for T-REX 700E / 700E F3C
• 6061-T6 Aluminum alloy material and CNC processed

Content:

• 700E Rear Frame mounting block (65x31.5x85mm) x 1
• Socket button head collar screw (M3x6mm) x 4
• Socket button head screw (M4x12mm) x 2
• Washer (4x10x1mm) x 2

Description:

• Use for T-REX 700E / 700L / 800E
• Suitable for Metal battery mount (H70084 / H70085), not for plastic battery mount (H70052)

Content:

• 1x 700E Latch-type Receiver Mount (L) (71x143.75x33mm)
• 1x 700E Latch-type Receiver Mount (R) (71x143.77x30.5mm)
• 2x Aluminum Hexagonal Bolt
• 1x Socket button head self tapping screw (T3x8mm)
• 2x Socket button head self tapping screw (T3x12mm)
• 2x Socket button head collar screw (M3x6mm)

Description:

• Use for T-REX 700E / 800
• Upgrade bearing parts with enhancement in more stable and durable motor rotation

Content:

• 1x Motor Pinion Gear Bearing Mount
• 1x Bearing MR126ZZ (6x13x5mm)
• 4x Socket collar screw (M3x6mm)

Description:

• Suitable for T-REX 700E / 700N / 700 F3C / 800E
• Must use with: 700FL Flybarless Rotor Head System H70H002XXT

Content:

• 2x Metal Main rotor holder arm
• 2x Linkage ball B (M3x4) (5x10.5mm)
• 4x Socket collar screw (M3x6mm)

Description:

• Use for 700FL Flybarless Rotor Head System H70H002XXT

Content:

• 2x 700EFL Main shaft (8x12x213.5mm)
• 1x Socket collar screw (M4x24mm)
• 1x Socket collar screw (M4x27mm)
• 1x Socket screw (M4x8mm)
• 2x M4 nut