Use for T-REX 500/600/600 Nitro

Ball link-Black x 12
 

Use for tail pitch assembly

Bearing MR106ZZ x 4(6x10x3mm)

Bearing 6800ZZ x 1(D10xD19x5mm)

Bearing 695ZZ x 2 (D5xD13x4mm

Align Bearings T-rex (MR63ZZ) set of 4pcs

Suitable for TN70 / T-REX 600N / T-REX 700N.
Must with Microbeast flybarless system. From experience works also on other systems.
Beastx Governor Sensor x 1(28AWG/305mm/6Pin)
RPM Magnet x 2

Utilizes brushless motor design for fast speed, high efficiency. And with the absence of brush wear, the longevity of servo is greatly increased.
Supports 8.4v high voltage to provide optimal speed and torque performance of the brushless servo.
Designed specifically for helicopters, with highest specifications on the market: 0.058sec/60°ultra fast speed and 23kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision.
Ultra high 12 bits signal resolution for excellent precision and smoothness.
Hardened high strength superalloy gears that increase the lifetime.
Brand new high voltage brushless servo equipped new CNC machined aluminum case, not only exhibited top of the line servo aesthetics, but also combine heat sink function and best protection for the servo.
Supports both analog and digital control signals.
Suitable for T-Rex 550/600/700/800 cyclic and rudder use.

SPECIFICATIONS

• Stall torque:17kg.cm(6.0V)
• Stall torque:22kg.cm(7.4V)
• Stall torque:0.058g.cm(8.4V)
• Motion speed:0.08sec/60°(6.0V)
• Motion speed:0.06sec/60°(7.4V)
• Motion speed:0.058sec/60°(8.4V)
• Rating voltage:DC 4.8-8.4V
• Temperature range:-20°C~+60°C
• Dimension:40.3 x 20.1 x 38.7mm
• Weight:80g

Use for T-REX 700 Nitro Pro / 700E.

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

700N Front drive gear assembly x 1

700N Short umbrella gear (24T) x 1

700N Long umbrella gear x 1

Align 460MX Brushless Motor 3200KV

1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 3s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor
2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
3.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
4.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
5.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
6.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
7.Suitable for T-REX 450E series.

Specification:

• Input voltage:3S
• Max continuous current:46A/68A(5sec)
• Max output power:Approx. 500w/730W(5sec)
• KV value:3200KV
• Dimension:spindle 3.5x29.2x38mm
• Weight:Approx. 87g

Accessories:

• Socket button head screw(M2.5X6mm) x 2
• Washer(Φ2.6XΦ5.8X0.6mm) x 2
• ALIGN standard 3mm gilt terminal x 3set

Align Gpro BTH01 Bluetooth Device. The Align Gpro BTH01 Bluetooth Device is a small device that allows you to bridge your compatible Align Gyro systems, APS-M system, APS system and more with your Smart phone/tablet. This means you can adjust the parameters of your Align helicopter/multicopter electronics directly, providing easy and simple setup changes.   

Specifications:
Operating voltage range: DC 3.3~8.4V
Operating current consumption: <100mA @ 4.8V
Operating Temperature: -20℃~65℃
Operating Humidity: 0%~95%
RoHS certification: Yes
Size: Approx 34.3x18.2x8.5mm
Weight: Approx 7.8g

Align D4BF Servo Horn

Suitable for servos of ALIGN DS410 / DS420 / DS410M

DS4 Servo Horn x 3 pcs
DS4A Servo Horn x 1 pcs

Use for Dominator 450/470/Pro.

• Landing skid x 1
• Washer x 2 (2.6x5.8x0.6mm)
• Socket button head screw x 2(M2.5x10mm)

T-Rex 250/470 CCPM cyclic use.

Features:

• Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision.
• High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics.
• Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servos high efficiency.
• Supports digital and analog control signal.
• Powerful and precise servo.

Specifications:

• Stall torque: 3.0kg/cm (6.0V), 4.0kg/cm (8.4V)
• Motion speed (60°): 0.06sec (6.0V), 0.05sec (8.4V)
• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Dimension: 23x12x31.3mm
• Weight: 17.5g

Content:

• 1x DS450 Digital Servo

Align DS820 High Voltage Brushless Servo

Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision. Brand new high voltage brushless servo equipped new CNC machined aluminum case, not only exhibited top of the line servo aesthetics, but also combine heat sink function and best protection for the servo.
Utilizes brushless motor design for fast speed, high efficiency. And with the absence of brush wear, the longevity of servo is greatly increased.
Supports 8.4v high voltage to provide optimal speed and torque performance of the brushless servo.
Designed specifically for helicopters, with highest specifications on the market: 0.055sec/60°ultra fast speed and 23kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision.
Ultra high signal resolution for excellent precision and smoothness.
Hardened high strength superalloy gears that increase the lifetime.
Supports both analog and digital control signals.

Suitable for T-Rex 550/600/700/800 cyclic and rudder use.

Stall torque: 22kg.cm(7.4V)
23kg.cm(8.4V)
Motion speed: 0.06sec/60°(7.4V)
0.055sec/60°(8.4V)
Rating voltage: DC 7.4-8.4V
Temperature range: -20°C ~ +60°C
Dimension: 40 x 20 x 39mm
Weight: 70g

Accessories:
DS820 High Voltage Brushless Servo x 1
Servo Arm x 1
DS615/655 Servo Arm Set x 1
Socket Botton Head Screw x 4(M2.5x10mm)

Align DS820M High Voltage Brushless Servo

Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision. Brand new high voltage brushless servo equipped new CNC machined aluminum case, not only exhibited top of the line servo aesthetics, but also combine heat sink function and best protection for the servo.
Utilizes brushless motor design for fast speed, high efficiency. And with the absence of brush wear, the longevity of servo is greatly increased.
Supports 8.4V high voltage to provide optimal speed and torque performance of the brushless servo.
Designed specifically for helicopters, with highest specifications on the market: 0.055sec/60° ultra fast speed and 23kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision.
Ultra high signal resolution for excellent precision and smoothness.
Hardened high strength superalloy gears that increase the lifetime.
Supports both analog and digital control signals.
Suitable for T-Rex 550/600/700/800 cyclic and rudder use.

Specifications:

• Stall torque: 22kg.cm (7.4V) / 23kg.cm (8.4V)
• Motion speed: 0.06sec/60° (7.4V) / 0.055sec/60° (8.4V)
• Rating voltage: DC 7.4V - 8.4V
• Temperature range: -20°C ~ +60°C
• Dimension: 40x20x39mm
• Weight: 80g

 

 

Align DS825M High Voltage Brushless Servo

Designed specifically for helicopters, utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision.
Rudder servo with 0.02sec/60° ultra high speed response, pushing the extreme.
Utilizes brushless motor design for fast speed, high efficiency. And with the absence of brush wear, the longevity of servo is greatly increased.
Supports 8.4v high voltage to provide optimal speed and torque performance of the brushless servo.
Designed specifically for helicopters, with highest specifications on the market: 0.02sec/60°ultra fast speed and 12.5kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision.
Ultra high signal resolution for excellent precision and smoothness.
Hardened high strength superalloy gears that increase the lifetime.
Brand new high voltage brushless servo equipped new CNC machined aluminum case, not only exhibited top of the line servo aesthetics, but also combine heat sink function and best protection for the servo.
Supports both analog and digital control signals.
Suitable for T-Rex 550/600/700/800 rudder use.

Specifications:

• Stall torque: 10.0kg.cm(7.4V)
• Stall torque: 12.5kg.cm(8.4V)
• Motion speed: 0.03sec/60°(7.4V)
• Motion speed: 0.02sec/60°(8.4V)
• Rating voltage: DC 7.4-8.4V
• Temperature range: -20°C~+60°C
• Dimension: 40 x 20 x 39 mm
• Weight: 72g

Accessories:

• DS825M High Voltage Brushless Servo x 1
• DS615/655 Servo Arm Set x 1
• Socket Botton Head Screw x 4(M2.5x10mm)

 

Engine fan mount x 1(9x19.97x26mm)

Socket head spring screw x 2(M4x8mm)

Socket screw x 2(M2x12mm)

Socket button head screw x 2(M3x5mm)

Socket button head screw x 2(M4x5mm)

Align Engine/Pinion Gear Set: 600N, NP

Super hard screwdriver head mady by HSS high alloy steel,wear and distortion resisting!
Purifier stretched handle made by aluminum alloy CNC , inside can place components and screws!
Using on heli's M2 socket screw and M3 socket screw!

Specifications:

• Handle x1
• Hexagon Screw Driver head 1.5mm x1
• Hexagon Screw Driver head 2.0mm x1
• Hexagon Screw Driver head 2.5mm x1
• Hexagon Screw Driver head 3.0mm x1

Use for:

• T-REX 700

Specifications:

• F6-12M Thrust Bearing x 2(F6xF12x4.5mm)

For T-rex 500

Feathering shaft x 2
Feathering shaft washer x 2
Socket screw x 2
 

Align G2 gimbal is specially designed for GoPro and Align action camera (Camera not included). G2 gimbal features advanced control system with superior computational power and the high precision brushless motors provide excellent agility and stability as well as powerful functionality. Support the use of satellite receivers and S.BUS/X.BUS receivers and supports programmability through PC interface, or connectivity to iOS/Android smartphones through Bluetooth. Enable you to enjoy aerial photography.

1. Comprehensive and high precision 3-axis brushless gimbal.
2. Multi-function 3-axis gimbal modes.
3. Support PC and iOS and Android system with Bluetooth interface.
4. Accurate fixation, high resolution brushless motor.
5. Standalone system can be operated independently.
6. Support the use of JR /Spektrum satellite receivers and S.BUS/X.BUS receivers.

G2 Gimbal Specification
Input Voltage: DC 12V(3S)
Current Draw: <500mA

Maximum Control Range:

• PAN 340°
• ROLL +/-20°
• TILT 120°

Maximum Control Rotation Rate:

• PAN 60°/s
• ROLL 60°/s
• TILT 60°/s

Temperature Range: -20~80°C
Voltage Output：5V / 0.3A
Dimension: 100.4x74x111.5mm
Weight: Approx. 200g

Box Content:

• G2 Gimbal
• G2 Gimbal Mount x 1
• M470 Frame Mounting Bolt(M2.5x28mm) x 4
• Socket Screw(M2.5x6mm) x 4
• M2.5 Screw(M2.5x10mm) x 4

• Suitable for Panasonic GH4 camera
• Photo mode: Switch camera to photo mode, and configure RC trigger switch to enable remote photo taking function.Video mode:
• Switch camera to video mode, and configure RC trigger switch to enable remote video start/stop function.
• Due to differences in camera models, the start/stop functionality is dependent on camera specification.

Suitable for G3-GH / G3-5D Gimbal.

Specification:

• G3 Gimbal Signal Wire × 1 (around 180mm)
• G3 AV Singal Wire x1(around 300mm)
• S.BUS Signal Wire x1(around 50mm)
• Wire Strap x2

Main Shaft TREX 450 PRO

Main shaft x 2(5x6x118mm)

Main shaft lock ring x 2(5x9x0.1mm)

Align H50089 T-Rex 500 Tail Shaft Slide Bushing

Align Helicopter 600 Bearing set (MR95ZZ) # H60088

Super hard screwdriver head made by HSS high alloy steel,wear and distortion resisting!

Purifier handle made by aluminum alloy CNC , inside can place components and screws!

Using on heli's M2 socket screw and M3 socket screw!
 

This is a pack of twelve Align 700 Ball Links HN7058

12PCS Ball link-Black (5X20.5mm)

1PCS  Elevator ball link

Hook & Loop Fastening Tape x 5(8x140mm)

Tail Rotor Bearing Mount Washer x 1 (4x5.1x0.3mm)
Bearing MR74ZZ x 2 (4x7x2.5mm)

Align Landing Skid White for T-rex 600E (2 pcs in set) H60111

New landing skid features rigid. When reducing the height, it makes the center of gravity lower. It is suitable for 3D flying

Specification:

Linkage ball A (M4x5) x 2(5x24mm)
Linkage ball B (M3x4) x 15(5x12mm)
Linkage ball C (M3x3.5) x 9(5x8.5mm)
Linkage ball C (M2x5) x 1(5x10mm)

Use for T-REX 450 3G Programmable Flybarless System

Arm F x 2(1.3x39mm)
Ball Link x 4

Use for T-REX 600N/600E/550

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Must with Auto-rotation Tail Drive Gear set (H60020AA)

M3 CNC socket collar screw × 4 (M3x24mm)

Weight:6.9g

Main drive gear 170T x 2 Black

For T-REX 550E / 600E / 600N

Must use with:

• New Main Gear Case Set-Black HN6064BA

Content:

• 2x Main drive gear 170T, black