Motor Mount for T-REX 550L

Includes:

• 550L Motor mount x 1
• Socket button head collar screw x 4(M3x8mm)

Motor Pinion Gear Bearing Mount for T-REX 550L

Includes:

• 550L Motor Pinion Gear Bearing Mount x 1
• Bearing MR126ZZ x 1(Φ6xΦ12x4mm)
• Socket Collar Screw x 4(M3x6mm)

Receiver Mount for T-REX 550L

Includes:

• 550L Receiver mount x 1
• 550L Aluminum Hexagonal Bolt x 2(M3x53.8mm)
• Socket button head self tapping screw x 1(T3x8mm)
• Socket button head self tapping screw x 2(T3x12mm)
• Socket button head collar screw x 2(M3x6mm)

T-REX 600 N CFRP servo adapter plate

T-rex 600XN Bearing 6700ZZ (10x15x4mm) (2pcs)

Use for T-REX 700X / 700N / 700E / 800E
Weight: 44g
Dual radial bearing with thrust bearing design to dramatically increase rudder precision and gyro locking action.

Comment

Compatible with Torque Tube Rear Drive Gear Set (NH7042A).

T-Rex 700N DFC Torque Tube #H7NT004A

Specifications:

Torque tube x 1

Torque Rod Sleeve x 2(7.95x10.5x5mm)

Bearing MR148ZZ x 2(8x14x4mm)

Instruction:

Use for T-REX 700 Nitro DFC.

6061-T6 Aluminum alloy material.

T-REX 700XN Dominator KIT only NEW 2018 model

Features:

• New slim chassis design
• Revised clutch lining with steel alloy
• New powerful cooling system
• Reinforced carbon rear support

Technical specifications:

• Length: 1346mm
• Height: 384mm
• Width: 202mm
• Main rotor blade length: 700mm
• Main rotor diameter: 1570mm
• Tail rotor blade length: 106mm
• Tail rotor diameter: 281mm
• Motor pinion: 13Z
• Main gear: 107Z
• Autorotation gear: 104Z
• Tail rotor gearbox: 22Z
• Translation: 8.23: 1: 4.73
• Tank capacity: 630cc
• Take-off weight (with battery): 4540g

Content:

• 1x Align T-REX 700XN Dominator kit ONLY( all below not included)
• 1 pair of 700mm carbon main rotor blades
• 1 pair of 106mm carbon tail rotor blades
• 3x Align DS820M swashplate servo
• 1x Align DS825M tail servo
• 1x Align DS530 throttle servo
• 1x Align B6TX 2-in-1 voltage regulator / pre-glow unit
• 1x BEASTX Governor Sensor

This is an Align 800E 115mm Carbon Fiber Tail Blade Set. These tail blades have been designed to provide optimal tail locking performance under high head speed and extreme flight conditions.
   
Specifications:

• Shape: Symmetrical wing
• thickness: 4.9mm
• Shaft Diameter: 3mm
• Weight: Approx. 12g/set

Use for Dominator 450L.

6061-T6 Aluminum alloy material.
450L Tail boom x 2(11x12x387mm)

Align's smallest and most petite 3D helicopter T-REX T15, carries the same superior pedigree and design concept that originated from the successful T-REX line of helicopters. Featuring strong power, superior flight control stability, and equipped with high end components, far exceeding any other helicopters currently on the market.

• Brand new Align T15G flight controller (compatible with iOS / Android)
• Auto-level attitude flight mode and extreme 3D flight performance
• Dual direct drive brushless motors
• Supports Futaba S-FHSS, Spektrum DSM2/DSMX satellites (optional) and JR DSM2/DMSS satellites (optional)

Technical specifications

Rotor blade length: 120mm

Main rotor diameter: 280mm Tail

rotor diameter: 51mm

Length: 272mm

Height: 85mm

Width: 52mm

Weight: approx. 100g (without battery)

Scope of delivery

• 1x Align T15 Helicopter
• 1x T15G Flight Controller
• 2x Rotor Blade 120mm
• 1x T15 Transport case
• 1x Align BL15M Brushless Main Motor (1500KV/2405)
• 1x Align BL15 Brushless Tail Motor (8000KV/1103)
• 2x Align T15 Digital Servo
• 1x Align T15T Digital servo
• 1x flight battery 2S LiPo 7.4V 380mAh 50C
• 1x satellite connection cable
• 1x blade bearing shaft key
• 1x 1.3mm Allen key (blue)
• 1x 0.9mm Allen key (red)

Needed to complete

• 1x remote control (at least 6 channels, Futaba S-FHSS capable)
• 1x charger (2S LiPo capable)

●347 Tail boom x 2(Φ11xΦ12x347mm)
●Rudder control rod x 1(Φ1.3x330mm)
●Ball link x 2
●Tail control guide x 2(Φ12.2xΦ14.6x4mm)

Tail Boom Brace

●Tail boom brace x 2

●Use for T-REX 600N / 600E. ●Tail boom brace end x 4
●M3 special washer x 4(Φ3xΦ8x2mm)
●Tail boom brace x 2(Φ5x460mm)
●Socket button head screw x 2(M3x8mm)
●Socket button head screw x 2(M3x12mm)

Specification:

Tail boom mount(Left) x 1
Tail boom mount(Right) x 1
Hex mounting bolt x 4(2.5x60.5mm)

Control arm mounting bolt x 1(6061-T6 Aluminum alloy material , 6x14x20.5mm) Socket button head screw x 2(M2.5x6mm) Vertical stabilizer mount x 1

Use for T-REX 250.

Tail Drive Assembly,Use for T-REX 450.

●Tail drive belt(550XL) x 1

• Tail pitch control link x 4
• Collar A x 2
• Collar B x 2
• Tail rotor hub x 1

Use for T-REX 700 Nitro Pro / 700E.

Tail control guide x 2
Tail rotor control arm x 1
Washer x 1(Φ2xΦ3.6x0.5mm)
Bearing MR52ZZ x 2(Φ2xΦ5x2.5mm)
Linkage ballA(M2x3.5) x 1(Φ4.75x8.18mm)

Suitable for all 450 class machines

Tail rotor hub × 2(Φ8x17.2mm)
Washer × 2(Φ2xΦ3.6x0.2mm)
Socket screw × 2(M2x8mm)
M3 Set screw × 2(M3x3mm)

Upgrade for Trex 250

 

Tail shaft slide bush x 1

Tail shaft slide bush x 1(Φ6XΦ8X20mm)

Use for Black Shark Ⅲ 700 fuselage.

Specification:

Metal plate(L) x 1
Metal plate(R) x 1
Metal tail unit(Black Shark) x 1
Control arm mounting bolt x 1
Tail rotor shaft assembly x 1
Long umbrella gear x 1(Φ12x8.2mm)
Bushing x 1(Φ12.4xΦ18x10mm)
Bearing MR126ZZ x 2(Φ6xΦ12x4mm)
Bearing 6701ZZ x 2(Φ12xΦ18x4mm)
Screw x 1(M3x14mm)
Screw x 4(M3x6mm)
Screw x 1(M3x22mm)
Socket button head screw x 1(M2.5x6mm)
Socket button head screw × 1(M4x5mm)

Specification:

700 tailboom support rods reinforcement plates x 2(73X37X6mm)
Socket screw x 2(M3x10mm)
M3 nut x 2

Specification:

Thrust bearing F10-8M x 2 (10.2x18x5.5mm)
Washer x 4(10x16x1mm)

Thrust bearingx 2 (6x14x5mm)

 2 Sets of  bearings

Thrust bearing F512M x 2

Torque tube x 1,fit T-REX 600/600 Nitro

Use for T-REX 450L / PRO.

Specification:

• Torque tube drive bearing holder x 1(5.5x11.25x8mm)
• Bearing MR84ZZ x 1(4x8x3mm)

• Front drive gear case x 1
• Socket button head self tapping screw x 2(T2x8mm)
  

Use for T-REX 550E/600/600 Nitro/600 PRO

Torque Tube Rear Drive Gear Set

Specifications:

• 250PRO Tail rotor shaft assembly x 2
• 250PRO Long umbrella gear x 2