●Damper rubber x 2(Φ4xΦ6.5x4mm)
●Washer x 2(Φ5.5xΦ8x0.4mm)

For T-rex 500

Damper rubber-black 80° x 2(Φ5.9xΦ11.1x4mm)
Spacer x 2(Φ6.1xΦ10.5x1.5mm)

Drive Belt 397 for t-rex 450 older editions

This is a replacement Align Servo Gear Set, and is intended for use with
the Align DS410 Servo. This package includes all five gears, so you can
replace the entire gear train in the servo

This is a replacement Align Servo Gear Set, and is intended for use with the Align DS410 Servo. This package includes gears G1, G2 and G5

This is a replacement Align Servo Gear Set, and is intended for use with the Align DS420 servo

This is a replacement Align Servo Gear Set, and is intended for use with
the Align DS420 Servo. This package includes gears G1, G2 and G5

Use for ALIGN DS525 Servo.

Specification:

• DS525 Metal gear G1x1
• DS525 Metal gear G2x1
• DS525 Metal gear G3x1
• DS525 Metal gear G4x1
• DS525 Metal gear G5x1

 

Apply for ALIGN DS615/655 Servo

Specification:

 

• DS615/655 servo upper cover x 1
• DS615/655 servo lower cover x 1
• Screw x 4
• O-Ring x 4

 

 

Apply for ALIGN DS655 Servo

Specification:

• DS655 gear G1x1
• DS655 gear G2x1
• DS655 gear G3x1
• DS655 gear G4x1

Fit T-REX 600/600 Nitro

Specification:

●Engine fan cover(L) x 1(30.5x157.5mm)
●Engine fan cover(R) x 1(30.5x157.5mm)
●Hex mounting bolt x 2(Φ2.5x60.5mm)

Engine fan mount x 1(9.5x22x31mm)
Socket head spring screw x 2(M4x8mm)
Socket screw x 2(M3x12mm)
Socket button hrad screw x 4(M4x5mm)

Engine mount(L) x 1(39.3x16x8.5mm)
Engine mount(R) x 1(39.3x16x8.5mm)

Specification:

●Engine mount(L) x 1(49.8x16x8.5mm)
●Engine mount(R) x 1(49.8x16x8.5mm)

Specification:

●Engine gear x 1(Φ15.4xΦ7x40.9mm)
●Clutch nut x 1(Φ14x6mm)

Ergonomically designed for optimal hand grip to prevent slippage, light  weight, and easy to assemble/disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button. Suitable for up to 50cc gasoline engine or 300 class nitro engine.

Designed for user replaceable, using 3S1P 1900~2300mAh/16c lipo batteries. Fully charged battery is capable of 500 starts and beyond. Battery packs are charged with any T-REX 450 battery chargers. Starting adapter includes double one way bearing design.

• High efficiency motor providing high starting power, and low reacting force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery under-voltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.
• Suitable battery: Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
• No load rotation speed:2300rpm
• Battery under-voltage:10.8V
• Quiescent current:0 mA
• Motor overheat protection:80°C
• Decelerate gear ratio:5.3:1
• Size:80x60x390mm
• Weight:700g (w/o battery)
• Starter body x 1
• Airplane spinner cup x 1

Use for T-REX 450.

F3-6 Thrust Bearing x 2(Φ3xΦ6x2.8mm)
Washer x 2(Φ2xΦ4.8x0.6mm)
Washer x 2(Φ3xΦ4.8x0.3mm)

Thrust Bearing F3-8M x 2 (D3xD8x3.5mm)
Includes: 2 Thrust bearings.

Feathering shaft x 2(Φ6xΦ8x93.2mm)
Feathering shaft washer x 2(Φ4xΦ12x1mm)
Socket screw x 2(M4x8mm)

Feathering Shaft Set for T-Rex 450 Dominator

Feathering shaft sleeve set for Align T-Rex 550X/550E/600/600N/650X radio controlled helicopter.

Specifications:

● Damper rubber (hardness 85 degrees) x2

● Feathering shaft sleeve x1

• Feathering shaft x 2
• Washer x 2(2x6x0.6mm)
• Aluminum collar x 2(4x5.6x1mm)
• Socket screw x 2(M2x6mm)

6061-T6 Aluminum alloy material and CNC processed. Using on T-REX 450pro / 450sport / 500

6061-T6 Aluminum alloy material and CNC processed。 fITS T-Rex 550 / 600 / 700

Using on T-REX 550 / 600 / 700.

Specification:

Feathering Shaft Wrench(8x12x12mm,10x14x12mm) x 1

For T-rex 500

Fiberglass horizontal stabilizer x 1
Fiberglass vertical stabilizer x 1

●3K fiberglass vertical stabilizer x 1
●3K fiberglass horizontal stabilizer x 1

●Flybar control rod x 2(Φ3.4x74.1mm)
●Socket screw x 4(M3x5mm)

●Flybar Paddlex2

●Size:60x32x3.84mm

●Weight:6.11g/pcs

Aftermarket paddle set FOR T-REX 500

Flybar paddle x 2
M3 set screw x 2(M3x4mm)
Sticker x 2/set
Weight:8.7g/pcs

Flybar rod x 2(Φ3x340mm)

For T-rex 500

Flybar seesaw holder x 1
Bearing MR83ZZ x 2(Φ3x8x3mm)
Bearing MR74ZZ x 2(Φ4xΦ7x2.5mm)
M3 collar screw x 2(M3x9.6mm)

Use for T-REX 600E PRO / 600EFL PRO.

Specification:

600PRO front frame brace(CF) x 2
600PRO rear frame brace(CF) x 2

Specification:

●Front frame brace x 1
●Rear frame brace x 2
●Switch mount x 1

●Socket collar screw x 26(M3x6mm)
●M3 screw x 2(M3x15mm)
●Socket screw x 2(M3x6mm)
●Socket screw x 2(M3x10mm)
●Self tapping screw x 4(T2.6x6mm)
●Self tapping screw x 6(T3x6mm)
●M3 washer x 2(Φ3xΦ8x1mm)

Apply for T-REX 600E PRO / 600EFL PRO

Specification:

Socket button head screw x 2(M3x6mm)
Socket button head screw x 2(M3x8mm)
Socket collar screw x 22(M3x6mm)
M3 screw x 2(M3x15mm)
Socket screw x 1(M2.5x8mm)
Socket screw x 8(M3x8mm)
Socket screw x 2(M3x12mm)
M3 washer x 2(Φ3xΦ8x1mm)