Align-T-rex 600EFL PRO Metal Main Rotor Holder Arm-Red

Included:

●Metal Main rotor holder arm x 2
●Φ5 Linkage ball B(M3x4) x 2
●Socket collar screw x 4(M3x6mm)

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Specification :
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450g

Content :

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530M HV Digital Servo
• 1x DS535M HV Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly :

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

AlignT-rex 700 Nitro Remote Control Helicopter Engine Fan #HN7052

All-New Align T-REX 700X is specially designed for extreme 3D flight addicts.

The advanced engineered narrow body design efficiently decreases gear  abrasion, machine deformation, increases power, and extends flying durability. The unique Split-Type Main Frame design, made of composite material side plates, is engineered using our proprietary embedding technology, which strengthens the entire structure and provides better accessibility for servicing the T-REX 700X. This extraordinary design includes a progressive lightweight landing skid making the T-REX 700X the leader in the 700 class. The Align T-Rex 700X is 400g (0.882lbs) lighter than our pervious model, this can effectively increase your flight time. The brand new 700EFL Flybarless Rotor Head System utilizesan extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision.

The T-REX 700X is equipped with the new 850MX motor which is highly efficient withsuperior power, excellent torque, low current draw, and is the most advanced motor approved by World RC Champions. The new designed motor cooling mount plate can reduce the motor operating temperature up to 20°C (68°F). The helicopter™s high quality design is accented with precision machined red and silver metal parts. The brand new RCE-BL200A brushless ESC supplies extreme power. The ESC includes a superior governor and BEC which allows you to set 5V-8V (Step:0.1V). The NEW DS820M/DS825M high voltage brushless servos are more efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

Specification
Length: 1320mm
Height: 360mm
Width: 195mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Rotor Diameter: 281mm
Motor Drive Gear:13T
Main Drive Gear:110T
Autorotation Tail Drive Gear: 102T
Tail Drive Gear: 23T
Drive Gear Ratio: 8.46:1:4.43
Weight(With Battery): Approx. 5100g

Accessories
T-REX 700X Kit Set x 1 set
700 Carbon Fiber Blades x 1 set
106mm 3K Carbon Fiber Tail Blades x 1 set
850MX Brushless Motor(490KV/4535) x 1
DS820M High Voltage Brushless Servo x 3
DS825M High Voltage Brushless Servo x 1
HOBBYWING Platinum HV 200A V4 Brushless ESC x 1
Microbeast PLUS Flybarless System x 1

Electric equipment
HOBBYWING Platinum HV 200A V4 Brushless ESC x 1
850MX Brushless Motor(490KV/4535) x 1
DS820M High Voltage Brushless Servo x 3
DS825M High Voltage Brushless Servo x 1
Microbeast Flybarless System x 1

For T-rex 500

Aluminum hexagonal bolt x 4

●6061-T6 Aluminum alloy material and CNC processed。 ●Aluminum hexagonal bolt x 6(Φ5x49mm)

Aluminum hexagonal bolt x 4(Φ2.5x60.5mm)

Use for Black Shark Ⅲ 700 fuselage.

Specification:

Aluminum collar × 4(Φ3xΦ8x9mm)

Socket collar screw × 4(M3x22mm)

Anti rotation bracket spacer x 4(12x4.49x2mm

APS sensor mounting platform tailboom clamp (800) × 1(35x8x23.9mm)
Socket screw × 2(M3x14mm)

For T-rex 500

Ball link-Black x 6

Use for T-REX 600E PRO / 600EFL PRO.

Specification:

Battery mount x 2
Hook and Loop Tape(M)x 2
Hook and Loop Tape(F) x 2

Bearing 683ZZ x 4(3x7x3mm)

Use for tail drive gear assembly

Bearing 684ZZ x 2 (4x9x4mm)
EZO Made in Japan

Bearing 6701ZZ x 4 (12x18x4mm)

Bearing FMR52ZZ x 2 (D2xD5xD6x2.3mm)

●Use for metal flybar seesaw holder.

Bearing MR74ZZ x 2(Φ4xΦ7x2.5mm)
Bearing 623ZZ x 2(Φ3x10x4mm)

Use for main rotor holder.
Use for 450、500、600

Bearing MR126ZZ x 4(Φ6xΦ12x4mm) 4 pcs

Bearing 6702ZZ x 2(Φ15xΦ21x4mm)

Bearing F683ZZ x 2(Φ3xΦ7x3mm)

●Bearing MR104ZZ x 2(Φ4xΦ10x4mm)
●Bearing MF105ZZ x 2(Φ5xΦ11.2xΦ10x4mm)

Bearing MR105ZZ x 2 (5x10x4mm)
EZO Made in Japan

Use for T-REX 500  Torque Tube Drive Assembly.

Specification:

• Bearing MR128 (8x12x2.5) x 4 (MR128)
• Bearing 684ZZ x 2 (4x9x4mm)

Bearing MR148ZZ x 4 (8x14x4mm)
EZO Made in Japan

Bearing MR688ZZ x 2 ( D8 x D16 x 5mm )

Use for bearing block. Use for T-REX 500.

Use for flybar seesaw holder.
Use for T-REX 500.

Bearing MR74ZZ x 2(Φ4xΦ7x2.5mm)
Bearing MR83ZZ x 2(Φ3xΦ8x3mm)

Use for tail rotor holder

Bearing MR83ZZ x 2(Φ3xΦ8x3mm)
Bearing MR95ZZ x 2(Φ5xΦ9x3mm)
 

Bearing 6800ZZ x 2(10x19x5mm)
Bearing 695ZZ x 2(5x13x4mm)

Bearings(681X)

Bearings 681ZZ (Φ1.5xΦ4x2mm) x 2

This is a replacement Align Upper and Lower Case Set, and is intended for use with the Align BL700H and 750H servos. 
(1) BL700H/750H servo upper cover
(1) BL700H/750H servo lower cover
(4) Screw

This is a replacement Align Servo Gear Set, and is intended for use with the Align BL750H Servo.

Balancer for most blades, a "must" tool

Carbon bottom plate x 1

Bottom Plate T-REX 450

Canopy Holder / Tailplane-Hose clip