This is an optional Align Torque Tube Rear Drive Gear Set, and is intended for use with the Align T-REX 550 and 600 electric helicopters. This gear set utilizes updated highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gears. This effectively minimizes gear striping and crash damage. These updated Red gears offer improved resistance and increased durability under extreme load conditions.

Includes:

• (1) Tail rotor shaft assembly
• (1) Long umbrella gear

Apply for T-REX 700E

700E Receiver Mount x 1
700N Elevator Servo Mount x 1
600E Elevator Servo Mount x 1
700N Servo Mounting Plate x 1
Socket button head screw x 2(M3x14mm)
Socket Button Head Collar Screw x 2(M3x6mm)
Socket button head self tapping screw x 2(T2.6x6mm)
Socket button head self tapping screw x 8(T2.6x12mm)

Use for T-REX 700E / 700E F3C V1 V2/ 800

6061-T6
Aluminum alloy material and CNC processed.

Specification

•  Metal battery mount x 1
• Hook & Loop Fastening Tape x 2
• Hook and Loop Tape(M)x 2
• Hook and Loop Tape(F) x 2

Align H60059 Motor Pinion Gear 11T TREX600

Fuel tank for Align T-Rex 600N
Fuel tank nipple x 1
Grommet x 1
Fuel tube x 1(2.5x4x70mm)
Fuel tank sinker x 1

One Way Bearing Shaft (2pcs)

Specification: Length:21.5mm

Max outer diameter:8mm

Hole outer diameter:6mm

Hole inner diameter:5mm

Precision CNC machined module 0.7 main gear for minimal noise and high energy transfer efficiency.
Use for T-REX 500E / 500ESP / 500E PRO / 500EFL PRO

Must with:Motor Pinion Helical Gear 12T(H50168)

Specification: CNC M0.7 

Slant Thread Main drive gear(134T) x 2

Weight:50.4g

Align T-Rex Socket Button Head Collar Screw # HN6015B

TB70 Tail Tube Clamp-Left×2(32.8x12x3.75mm)

TB70 Tail Tube Clamp-Right×2(32.8x12x3.75mm)

Round Head Hexagon Socket Screw×4(M2.5x6mm)

Torque tube bearing holder x 2, with bearing.
EZO Made in Japan

Align T-rex Torque Tube Bearing set 500 #H50098

Use for T-REX 450 Pro.
Special protection design torque tube. When you have a crash or collision with tail blade, it will protect the umbrella gear and make the damage at the back section of the torque tube. While using this torque tube, please always check if the torque tube is damaged or broke every time after a collision while flying.
Suitable for normal and 3D flying.

Included in the package:

Torque tube x 2
Torque tube end x 4
347 tai boom x 1(11x12x347mm)
Max. impact torque:5~7kg.cm

For T-rex 500

Tail boom brace end x 4
Tail boom brace x 2(1.9x3.9x320mm)

2x 500X boom (18x19x529mm

This is an Align T-Rex 600 Tail Boom. Works with 600N and 550 helicopters.

Includes:

Tail boom (20.3x21.5x625mm) x 2

Tail control guide x 2

Rudder control rod (1.96x657mm ) x 1

Ball link x 2

ALIGN Tail Boom Brace 550-600 #H55037

Align Tail Drive Belt (600/600CF) H60036

Tail drive belt(592XL) x 1

Let's delve further into the exciting world of the Align TB60 Super 6S Electric RC Helicopter Kit, a true test of skill and precision. This helicopter kit marks the return of Align RC Helicopters to the forefront of the hobby, and it comes in two enticing versions.

The 6S edition of the TB60 is tailored for pilots who prefer the power of a genuine 5000mAh 6S LiPo battery, offering a thrilling flight experience. Alternatively, there's the 12S version for those who seek even more power and extended flight times. This dual-flavor offering ensures that pilots can find the perfect fit for their flying preferences.

The TB60 is not just a revival; it's a step forward with a host of new features. The addition of a belt drive tail, an updated boom locking and tension system, redesigned skids, and a quick-release battery tray all enhance the helicopter's overall performance. These improvements make setup and maintenance a breeze while contributing to a more efficient and enjoyable flying experience.

One of the standout features of the 6S version is its compatibility with a 150A Hobbywing ESC and a robust 930KV 750MX motor, offering ample power and control for demanding flight maneuvers. This combination ensures that pilots can push their skills to the limit and explore new horizons in the world of RC helicopter flying.

It's important to note that the descriptions provided here assume the purchase of the full super combo, which includes all available options at the time of purchase. This comprehensive package is designed to cater to the needs of avid RC helicopter enthusiasts, offering a complete and customizable experience that leaves no room for compromise. The Align TB60 Super 6S Electric RC Helicopter Kit is a thrilling journey for those who demand the best in their RC flying adventures.

Specification:

• Length: 1218mm
• Height: 353mm
• Width: 183mm
• Main Blade Length: 600mm
• Main Rotor Diameter: 1339mm
• Tail Length: 95mm
• Tail Rotor Diameter: 253mm
• Motor Belt Pulley: 23T
• Belt Pulley: 44T
• Front Drive Main Shaft: 15T
• Main Drive Gear: 62T
• Autorotation Tail Drive Gear: 28T
• Tail Drive Gear: 23T
• Drive Gear Ratio: 7.89:1:5.04
• Max RPM(approx.): 2300RPM
• Weight(w/o Batteies): Approx. 2.8kg

Included

• TB60 Kit Set x 1 set
• 95 Carbon Fiber Tail Blades x 1 set
• Lube Pack x 1
• 600 Carbon Fiber Blades x 1 set
• 750MX Brushless Motor(930KV/4236) x 1
• DS830M High Voltage Brushless Servo x 3
• DS835M High Voltage Brushless Servo x 1
• RCE-BL150A Brushless ESC x 1
• MICROBEAST Flybarless System x 1

Radio transmitter and electronic equipment required for assembly:

• 1.Transmitter(6-channel or more,helicopter system)
• 2.Receiver(6-channel or more)
• 3.Pitch gauge or Digital Pitch Gauge
• 4.6S Li-Po 2600~5200mAh battery x 1

Use for T-REX450 XL / CF / SE / S(tail drive gear 25T)/450 L / Pro / Sport V2.

This new main gear is great for the balance.

New super strength plastic-steel material, multinational patent design, light weight, and special cooling blade design is good for lowering the temperature of electronic equipment and motors. It can efficiently increase the wind flow.

Specification:

• Autorotation tail drive gear (106T) x 1 (Black)
• Weight:8.5g/pcs

Align Trex 450 Flybar Rod 210mm, set of 2 #HS1264

Align Trex HS1229 (HS1026) One-Way Bearing New
Made in Germany

Use for T-REX 450 L / SE / V2 / PRO.

Ball link x 12(11x2.3mm)

Align Trex 450 Tail Shaft Slide Bush #H45T001

Use for T-REX 500DFC/600E PRO/600EFL PRO/600N V2/600N 3G .

600PRO Elevator ball link Black x 8

This is a set of replacement Main rotor shaft bearings for the Align 600 line of helicopters. These bearings fit inside the upper, middle and lower bearing blocks and support the main shaft. Package includes two 10x19x5mm 6800ZZ bearings and one 9x17x5mm 689ZZ bearing.

Align Trex 600/700 Flybarless Linkage Rod Set #HN7100A

Use for T-REX 600EFL PRO

Specification:

Linkage rod(A) x 2(2.5 x 56mm)

Linkage rod(E) x 3(1.96 x 32mm)

Align T-Rex 700E tail rotor pushrod

ALIGN Trex 700 Main shaft BALL BEARINGS 2PCS

Use for T-REX 700 Nitro pro, 700E / DFC.

Included: Torque tube x 1
Torque Rod Sleeve x 2 (7.95x10.5x5mm)
Bearing MR148ZZ x 2 (8x14x4mm)

Use for T-REX 800E DFC.

Specifications:

1. Metal plate(L) x1
2. Metal plate( R) x1
3. Metal tail unit set x1
4. Tail rotor shaft assembly x1
5. Long umbrella gear x1(F12x8.2mm)
6. Bushing x1(F12.4xF18x10mm)
7. Bearing MR126ZZ x2(F6xF12x4mm)
8. Bearing 6701ZZ x2(F12xF18x4mm)
9. Socket screw x2(M3x26mm)
10. Socket screw x4(M3x6mm)
11. Socket collar screw x1(M3x22mm)
12. M3 Specialty washer x2(F3xF8x2mm)
13. Vertical stabilizer mount x1

Use for:

• T-REX 550E / 550X / 550L / 600L / 600E / 600N

Dual radial bearing with thrust bearing design to dramatically increase rudder precision and gyro locking action

Content:

• 2x Metal tail rotor holder
• 1x V2 Tail Rotor Hub (10x43.4mm)
• 2x Tail rotor washer (8x10x0.3mm)
• 4x Bearing MR106ZZ C0 (6x10x3mm)
• 2x Thrust Bearing F5-10M
• 2x M3 Washer (3x8x1mm)
• 1x M4 set screw (M4x4mm)
• 2x Socket collar screw (M3x8mm)
• 2x Sokcet collar screw (M3x17mm)
• 2x M3 nut

Align-T-rex 600 Nitro Tail Boom Mount Set

Included items:

600N Tail Boom Mount(L) x 1
600N Tail Boom Mount(R) x 1
600N Aluminum Hexagonal Bolt x 6 (ψ3xψ5x49mm)
Socket Collar Screw x 12 (M3x8mm)
Socket Screw x 4 (M3x12mm)
M3 Lock Nut x 4
Socket Button Head Screw x 1 (M3x5mm)

Align-T-rex 600EFL PRO Metal Main Rotor Holder Arm-Red

Included:

●Metal Main rotor holder arm x 2
●Φ5 Linkage ball B(M3x4) x 2
●Socket collar screw x 4(M3x6mm)

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Specification :
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450g

Content :

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530M HV Digital Servo
• 1x DS535M HV Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly :

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

AlignT-rex 700 Nitro Remote Control Helicopter Engine Fan #HN7052