Use for T-REX 700 Series

Content

• 4x 700EFL V2 Radius Arm (22.55x32.9x8.3mm)

Description:

Align T-Rex 700X Speed Frame Mounting Bolt

Use for:

• T-REX 700X with 700E Speed Fuselage

Content:

• 700X Aluminum Hexagonal Bolt(M3x14mm) x 4
• Socket button head collar screw(M3x6mm) x 4
• Socket button head collar screw(M3x8mm) x 2
• Screw(M3x15mm) x 4

Description:

Align T-Rex 700X Tail Boom Mount Set

Use for:

• T-REX 700X

The new tail boom mount is greatly reinforced to sustain the heavy gear abrasion during extreme 3D flights and to enhance the flight performance.

Content:

• 700X Tail Boom Mount(L) x 1
• 700X Tail Boom Mount(R) x 1
• 700X Aluminum Hexagonal Bolt x 3(M3x36mm)
• 700X Aluminum Hex Frame Bolts x 2(F2.5x36mm)

Align T-Rex 700XN The 3rd Main Shaft Bearing Block

Use for:

• T-REX 700XN

Aluminium alloy material

Content:

• 1x 700XN Main Shaft Third Bearing Block
• 1x 6901ZZ Bearing (12x24x6mm)
• 4x Socket Screw (M3x10mm)

Use for:

• T-REX 700XN

Content:

• Bearing 625ZZ x 4(F5xF16x5mm)

Align T-Rex 700XN Bottom Plate

Use for:

• T-REX 700XN

Content:

• 2x 700XN Carbon Bottom Plate

Align T-Rex 700XN Canopy Mounting Bolt

Use for:

• T-REX 700XN

Aluminium alloy material

Content:

• 2x 700XN Canopy Mounting Bolt
• 2x Canopy Front Mounting Bolt
• 4x Socket Screw (M3x8mm)

Align T-Rex 700XN Carbon Fiber Main Frame (U)

Use for:

• T-REX 700XN

Carbon fiber material.

Content:

• 700XN Carbon Fiber Main Frame (Upper Side) x 1
• M2.5 Cone Nut x 8
• 700X Frame Washer x 2

Align T-Rex 700XN Carbon Fiber Main Frame(L)

Use for:

• T-REX 700XN

Carbon fibre material.

Specification:

• 700XN Carbon Fibre Main Frame (Lower side) x 1

Align T-Rex 700XN Clutch Bell Set

Use for:

• T-REX 700XN

Aluminium alloy material.

Specification:

• 700N Clutch Bell x 1 (F56xF51x20.5mm)
• 700XN Clutch Ring x 1 (F49xF51x9.3mm)
• Bearing 695ZZ x 1 (F5xF13x4mm)

Align T-Rex 700XN Clutch/Start Shaft

Use for:

• T-REX 700XN

Chromoly steel alloy material.

Content:

• 1x 700XN Clutch/Start shaft (5x12x85.5mm)
• 2x M4 Set screw (M4x4mm)
• 1x 600N Starter coupling (8x10x18mm)

Use for:

• T-REX 700XN

Polyoxymethylene material.
Must use with M1 Engine Helical Gear Set/13T (H7NG008XXT).

Content:

• CNC Slant Thread Main Drive Gear/107T × 1

Use for:

• T-REX 700XN

Glass fiber reinforced nylon material.

Content:

• 700XN Gear Assembly(L) x 1
• 700XN Gear Assembly(R) x 1
• 700X Aluminum Hexagonal Bolt x 4(M3x36mm)
• Socket Screw x 2(M3x12mm)
• M3 Nut x 2(M3xT2)
• Bearing 625ZZ x 2(F5xF16x5mm)

Align T-Rex 700XN Engine Mount

Use for:

• T-REX 700XN

Aluminium alloy material.

Specification:

• 700XN Engine Mount x 1
• Socket Screw x 6 (M4x8mm)

Align T-Rex 700XN Idler Pulley Helical Gears

Use for:

• T-REX 700XN

High carbon steel material.

Content:

• 700XN Idler Pulley Helical Gear 23T(M1) x 1
• 700XN Idler Pulley Helical Gear 20T(M1) x 1

Align T-Rex 700XN Linkage Rod Set

Use for:

• T-REX 700XN

Stainless steel material

Content:

• 2x 760X Linkage Rod A (M3x35mm)
• 2x 700X Linkage Rod A (M3x41mm)
• 10x 700 Elevator Ball Link (5x6x19mm)
• 10x 700DFC Linkage Rod Holder (6x4.85x3mm)
• 1x 700XN Throttle Linkage Rod (M2x76mm)
• 2x 700N Ball Link (5x20.5mm)

Align T-Rex 700XN M1 Engine Helical Gear Set/13T

Use for:

• T-REX 700XN

High carbon steel material.
Gear Ratio 1:8.23

Content:

• 700XN M1 Engine Helical Gear/13T × 1
• 700N Clutch nut × 1(F14×6mm)

Align T-Rex 700XN M3 Special Washer-Red

Use for:

• T-REX 700XN

Aluminium alloy material

Content:

• 30x M3 Special Washer (3x8x2mm)

Align T-Rex 700XN Main Frame Mounting Bolt

Use for:

• T-REX 700XN

Aluminium alloy material

Content:

• 14x 700XN Main Frame Mounting Bolt

Use for T-REX 700XN.
Aluminium alloy material.
New 700XN Metal Drive Gear Assembly utilizes all-aluminum CNC machining technology for strengthen structure and coefficient of friction, allow to experience the high-performance flights. Super durable and also pretty out looking with high quality of metal texture.

• 700XN Metal Gear Assembly(L) x 1
• 700XN Metal Gear Assembly(R) x 1
• 700X Aluminum Hexagonal Bolt x 4(M3x36mm)
• Socket Screw x 2(M3x10mm)
• Socket Screw x 4(M3x8mm)
• Bearing 625ZZ x 2(Φ5xΦ16x5mm)

Align T-Rex 700XN nitro canopy Green

Manufactured with durable lightweight fiber material, and utilizing an engineered aerodynamic design, the Align Advanced Lightweight Canopy forms a protective shield for the entire machine.

Align T-Rex 700XN Receiver Mount

Use for:

• T-REX 700XN

Glass fiber reinforced nylon material.

Content:

• 700XN Receiver Mount x 1
• 700X Aluminum Hexagonal Bolt x 3(F3x36mm)
• Socket Screw x 4(M3x20mm)
• Socket Button Head Self Tapping Screw x 2(T3x8mm)

Align T-Rex 700XN Rudder Servo Mount Set

Use for:

• T-REX 700XN

Content:

• 2x 700XN Rudder Servo Mount
• 1x 700XN Carbon Rudder Servo Mount Board
• 8x Socket Screw (M3x8mm)

Align T-Rex 700XN Shapely Reinforcement Plate And Brace Assy

Use for:

• T-REX 700XN

Aluminium alloy material.

Content:

• 700XN Shapely Reinforcement Brace(L) x 1
• 700XN Shapely Reinforcement Brace(R) x 1

Use for:

• T-REX 760 / 700X / 700L / 700E.

Lengthened tail boom design which can be used with 760/780 main blades has a better flight stability and is suitable for F3C flight.

Specification:

• Carbon Tail Boom x 1 (F20.3xF21.5x855mm)
• Torque Tube x 1 (M7.2xF8x848mm)
• Torque tube end x 2 (M7.2xF7.95x30mm)
• Bearing MR148ZZ x 2 (F8xF14x4mm)
• Torque Rod Sleeve x 2 (F7.95xF10.5x5mm)
• Carbon Tail Control Rod x 1 (F2.7xF5x828mm)
• Linkage Rod C x 2 (F2.5xF23mm)
• 700NFL Ball Link x 2 (F5xF20.5mm)
• Carbon Tail Control Rod sleeve x 2 (F2.6xF6x11mm)
• Tail Control Guide sleeve x 1 (F5xF6x35mm)

Align T-REX 760X 3D DOMINATOR TOP Super Combo #RH76E01A

The new models include all the current design updates from their previous releases that brings the whole T-REX family together.

• New 760 Main Blades & 105 Tri-Tail Blades
• Narrow Body Design / Split-type of Main Frame
• DS820M/DS825M High Voltage Brushless Servo
• Powerful 850MX 490KV Motor
• Brand New Platinum HV 200A ESC
• MICROBEAST Plus Flybarless System

Specifications

• Length: 1390mm
• Height: 360mm
• Width: 195mm
• Main Blade Length: 760mm
• Main Rotor Diameter: 1702mm
• Tail Rotor Diameter: 287mm
• Motor Drive Gear: 12T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 102T
• Tail Drive Gear: 23T
• Drive Gear Ratio: 9.33:1:4.43
• Weight (w/o Battery): Approx. 3750g

Package Includes

• 2x 760 Carbon Fiber Blade
• 2x 760X 3D Main Rotor Holder Arm
• 2x 760X F3C Main Rotor Holder Arm
• 3x 105mm 3K Carbon Fiber Tail Blade
• 1x 850MX Brushless Motor (490KV)
• 3x DS820M HV Brushless Servo
• 1x DS825M HV Brushless Servo
• 1x Platinum HV 200A Brushless ESC
• 1x MICROBEAST Plus Flybarless System

Required for Assembly (NOT INCLUDED !)

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 2x 6S Li-Po 4500 ~ 5200mAh
• 1x Digital Pitch Gauge

Use for:  T-REX 760X

6061-T6 Aluminum alloy material and CNC processed.

Specification:

• 760X Linkage Rod A x 2 (M3x35mm)
• 700X Linkage Rod A x 3 (M3x41mm)
• 700 Elevator Ball Link x 10 (F5xF6x19mm)
• 700DFC Linkage Rod Holder x 10 (F6xF4.85x3mm)

Align T-rex 800E DFC Main Shaft, set of 2 # H80H001

Included:

• 2x 800E DFC Shaft
• 1x Socket collar screw (M4x24mm)
• 1x Socket collar screw (M4x27mm)
• 2x Socket screw (M4x8mm)
• 2x M4 Mutter
• 1x Washer (12x16x0.8mm)
• 1x Washer (12x16x0.5mm)

Align T-rex Bearings (MR84ZZ) HS1032T set of 4

Bearing 6800ZZ x 4(10x19x5mm)

Used on trex 550E in the main metal bearing holding block

Used on trex 700 in metal main rotor holder

This is a replacement Align Canopy Nut Set.

Includes:

• Canopy nut x 4
  
• Canopy protector x 4

Changed from HN7032 Align t-rex Carbon Fiber Tail Boom-Matte Black

Description:

• Suitable for T-REX 700E / 800E
• Highly enhance structural strength, effectively increase the torsional capability
• Must use with: Motor Slant Thread Pinion Gear 13T M1 27H70G009AXT

Specifications:

• Height: 13.5mm
• Teeth: 110
• Modulus: M1

Content:

• 1x CNC Slant Thread Main drive gear 110T M1 13.5

This is an Align 80 Durometer Rubber Damper Set, and is intended for use with the Align T-Rex 700E and F3C helicopters.

Use for:

• T-REX 700E F3C

Content:

• Damper rubber (9.9x17x7mm) x 2
• Washer (10x16x1mm) x 2

Description:

Align T-Rex Feathering Shaft Wrench (470/700)

Use for:

• T-REX 470 / 700

6061-T6 Aluminum alloy material and CNC processed.

New 470 Feathering Shaft Wrench is specially designed for T-REX 470 feathering shaft assembly also for T-REX 470/700 counter thread main linkage rod length adjustment.

Content:

• Feathering Shaft Wrench(12x115x9mm) x 1
• One-way Bearing HF0512(F5xF10x12mm) x 1

ALIGN T-REX damping rubber 700 DFC

Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.

700DFC Head Damper x 4(10x17x7mm)