Use for:

• T-REX 600XN

Glass fiber reinforced nylon material / Aluminium alloy material

Content:

• 1x 600XN Receiver Mount
• 3x 700X Aluminum Hexagonal Bolt (M3x36mm)
• 4x Socket Screw (M3x16mm)
• 2x Socket Button Head Self Tapping Screw (T3x6mm)

Use for T-REX 600XN.
Carbon fiber material / Aluminium alloy material.

One of the most classic ALIGN models, T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness. Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision.

This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!

Features:
After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.

Landing skid is tilted 5 degree forward which improves crashworthiness.
Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.

The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.

Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.

Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.

The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.

CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.

Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.

High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.
Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.
Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.

Specifications:

• Length: 1152mm
• Height: 356mm
• Main Blade Length: 600mm
• Main Rotor Diameter: 1354mm
• Tail Rotor Diameter: 260mm
• Engine Pinion Gear: 20T
• Main Drive Gear: 170T
• Autorotation Tail Drive Gear: 180T
• Drive Gear Ratio (E:M:T): 8.5:1:4.5
• Fuel Tank Capacity: 440ccm
• Flying Weight Approx: 3400g

Content:

• 1x T-REX 600XN Kit
• 1x O.S. 55HZ Hyper
• 1x Align or OS High Performance Muffler
• 2x 600 Carbon Fiber Blade
• 2x 95 Carbon Tail Blades
• 3x DS820M Standard servo
• 1x DS825M Tail servo
• 3x DS530 Throttle servo
• 1x Govemor Sensor
• 1x B6M 2-In-1 Voltage Regulator

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)

Use for:

• T-REX 600XN

Glass fiber reinforced nylon material / Aluminium alloy material

Content:

• 1x 600XN Tail Boom Mount (L)
• 1x 600XN Tail Boom Mount (R)
• 5x 700X Aluminum Hexagonal Bolt (M3x36mm)

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 1x 600XN Main Shaft Third Bearing Block
• 1x 689ZZ Bearing (9x17x5mm)
• 4x Socket Screw (M3x8mm)

Specification:

Aluminum tail boom x 2(20x21.5x785mm)

This is an optional upgraded 13.5mm thick 112T Slant Thread Main Gear from Align. The thicker gear allows for improved strength under demanding power conditions. This gear must be paired with AGH70062A or H70G010XX for best results.

Depending on the helicopter that the gear is installed on, modification to the carbon fiber frame may be needed to ensure proper fitment

Suitable for T-REX 700E F3C / 700E / 700N, set of 4 pcs

Included:

Tail Control Guide x 4 (21.5x26x46.85mm)
Socket button head self tapping screw x 4 (T4 x 10mm)

Use for T-REX 700N / 700E

Newly 700E F3C carbon main blades for superior stability and resistant to wind gusts.

Shape: Symmetrical wing

 Length: 700x60x8mm

Width: 14mm

Shaft Diameter: 5mm

Weight: approx. 435g / set

Align T-Rex 700 Feathering Shaft HN7025

Instruction:

Use for T-REX 700 Nitro Pro / 700E。

Specification:

Feathering shaft x 2(7x10x106.5mm)

Socket screw x 2(M6x16mm)

104T M1 Autorotation tail drive gear x 1

Use for all 700 class machines.

Newly designed highly rigid 700 M0.7 main gear, manufactured through high precision CNC machining process, with wear resistant, low noise

1 gear in a set

Dual radial bearing with thrust bearing design to dramatically increase rudder precision and gyro locking action.

Use for T-REX 700N/700E/800E.

Specification:

Fuel tank x 1
Fuel tank plug x 1
Grommet x 1
Fuel tube x 1(2.5x4.5x70mm)
Fuel tank sinker x 1

Use for T-REX 700 Nitro Pro.

• Linkage rod(A) x 2(1.96x14mm)
• Linkage rod(B) x 2(1.96x22mm)
• Linkage rod(C) x 2(1.96x56mm)
• Linkage rod(D) x 2(1.96x44mm)

Skid Pipe set Silver

2x Skid pipe (9x325mm)

4x Skid pipe end cap

Spare part suitable for:

Align T-REX 700

Align T-rex 700 Skid Pipe, set of 2 HN7049

Skid pipe x 2(9x325mm)

Skid pipe end cap x 4

Fits model:

• T-Rex 700E
• T-Rex 700 F3C
• T-Rex 700E DFC
• T-Rex 800E
• T-Rex 700N DFC
• T-Rex 700L
• T-Rex 700X
• T-Rex 760X
• T-Rex 700XN
• T-Rex 600XN

Align T-Rex 700 Tail Boom Support Rods

Use for:

• 700X / 700L / 700N / 700XN / 700E / 760X / 800

Content:

• 2x 2x 700XN Tail boom
• 4x M4 Washer (4x8x1mm)
• 2x Socket Screw (M4x12mm)
• 2x Socket Screw (M4x14mm)

Use for T-REX 700

Content

• 2x 700 Tail Control Arm
• 2x 700N Linkage Ball C

• 700 tail rotor hub x 1
• Tail rotor washer(D8xD10x0.3mm) x 4
• washer(D3xD8x1mm) x 2
• M4 set screw x 2(M4x4mm)
• socket collar screw x 2(M3x8mm)
• Weight:27.19g

Use for T-REX 700E/700N/800
Must with:
700 Tail Rotor (H70T001XXW)

Align T-rex 700-800 700DFC Main Rotor Grip Arm Integrated Control Link Set

Use for T-REX 700X/700L/700E/800E.

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Suitable for: 104T M1 Autorotation tail drive gear set(H70G007XXT)

Front drive gear assembly x 1(22T) (F5xF7.8x53mm) Modulus:1

Short umbrella gear - Red x 1(M1/24T)

Long umbrella gear - Red x 1(M1/24T)

Tail Drive Gear Spacer(0.3) x 1(F12xF15x0.3mm)

Align T-Rex 700E Three Blade Rotor Head

The new 700E Three-Blade Rotor Head is specially made from 3D rotation surface process, as well as aerospace grade aluminum alloy, strongly enhance structural toughness and precision.
Also painted with high texture and bright red satin plating color highlight the extraordinary craftsmanship and beauty all in one.
The new three-blade head provide superior flight stability with low CG design allow to reduce flying resistance but bring more rigidity and fast response on the other hand.
Pilots can easily control between active and static condition, and enjoy the pleasure from the flight.

Content:

• 1x Three-Blade Rotor Housing
• 3x Metal Main Rotor Holder
• 3x Three-Blade Shaft Set
• 3x Head Damper (10x17x7mm)
• 6x Elevator Ball Link (5x6x19mm)
• 3x Three-Blade Shaft Screw
• 3x Linkage Rod A
• 3x Main Blade Grip Arm
• 2x Elevator Arm Set
• 1x Linkage Rod Set
• 6x Linkage Rod Holder
• 3x Linkage Ball B (M3x4)
• 2x Washer (3x4.8x0.3mm)
• 6x Feathering Shaft Washer (10x16x1mm)
• 3x Thrust Bearing F10-18M (10.2x18x5.5mm)
• 6x 6800ZZ Bearing (10x19x5mm)
• 6x Socket button Head Collar Screw
• 2x Socket Screw (M3x10mm)
• 2x Socket Button Head Screw (M2x5mm)
• 2x Socket Button Head Collar Screw (M4x24mm)
• 3x Socket Button Head Collar Screw (M5x32mm)
• 3x Feathering Shaft Socket Button Head Screw (M6x16mm)
• 2x M4 Nut
• 3x M5 Nut
• 1x 700DFC Main Shaft
• 1x Main Shaft Spacer (1mm)
• 1x Main Shaft Spacer (1.2mm)
• 1x Main Shaft Spacer (0.8mm)
• 1x Main Shaft Spacer (0.5mm)
• 1x CCPM Metal Swashplate
• 6x Linkage Ball B (M3x4)
• 1x Long Linkage Ball (M3x4)
• 1x Three Blade Holder

Use for T-REX 700 / 760 / 800 

Suitable for T-REX 700 / 760 / 800
The brand new 700E three tail blade set is specially made from aerospace grade aluminum alloy with precise mechanical process, highly enhance structural rigidity and precision.
Total 3 tail blades design allow to achieve superior tail-lock performance and excellent controlling feel. For those who is addicted to 3D flying, you must convert to the three tail blade set and enjoy the amazing powerful flight performance.

Content

• 3x Metal Tail Rotor Holder
• 1x Stainless Steel Tail Rotor Hub
• 3x Tail Rotor Washer (8x10x0.3mm)
• 3x Socket Button Head Collar Screw (M3x8mm)
• 6x MR106ZZ Bearing (6x10x3mm)
• 3x Thrust Bearing F5-10M (5x10x4mm)
• 3x M3 Nut
• 1x M4 Set Screw (M4x4mm)
• 1x Metal Tail Pitch Assembly
• 1x Slide Shaft
• 1x Collar
• 2x MR128ZZ Bearing (8x12x3.5mm)
• 3x Control Link
• 1x Bearing Holder
• 6x Collar
• 6x Collar Screw (M2x6mm)
• 3x Socket Button Head Collar Screw (M3x17mm)
• 3x M3 Nut

Align T-Rex 700E TiN Main Rotor Shaft

Use for:

• T-REX 700E / 700X / 760X

All new 700E TiN Shaft is produced by Physical Vapor Deposition (known as TiN, gold color). Main features will be well hardness coating protection, high density, low coefficient of abrasion, excellent adhesion, oxidation, and corrosion resistance improvement. It will definitely make your heli to be in high quality and excellent durability at whole time.

Content:

• 1x 700E TiN Main Rotor Shaft
• 1x Socket buton head collar screw (M4x24mm)
• 1x M4 nut
• 1x Main shaft spacer (1) (12x16x1mm)
• 1x Main shaft spacer (0.3) (12x16x0.3mm)

Align T-Rex 700E Tri-Blades Head Damper. Use for 700 / 760 / 800 with Three-Blade Rotorhead

Content

• 6x 700E Tri-Blades Head Damper

Use for 700 / 760 / 800 with Three-Blade Rotorhead

Content

• 3x 700E Tri-Blades Head Feathering Shaft

Use for T-REX 700 / 760 / 800 with Three-Blade Rotorhead

Content

• 3x 5 Linkage Ball B (M3x4mm)
• 8x 700N Linkage Ball B (M3x4mm)
• 1x 5 Linkage Ball D (M3x3.5mm)
• 1x 5 Long Linkage Ball (M3x4mm)

Align T-REX 700L Dominator Kit

Powered by 800MX 520KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
In addition, numerous performance upgrades were carried on to this model, such as: DFC main rotor assembly, new style swashplate anti-rotation guide, hardened main gear, new style tail transmission, dual pivoted tail control system, metal frame reinforcement plates, etc.

The superior control feel, and attractive look, the T-Rex 700L Dominator is the top choice for any enthusiasts!

Features:

• The 700 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision.
• Brand new frame reinforcement plates and blocks effectively improves frame′s anti-torsion ability. The improvement in frame rigidity and solidness is especially evident during extreme 3D maneuvers.
• 3K side frame plate is integrated with battery rail, combined with all in one cartridge and latching battery mounting design, and CNC aluminum alloy battery mounting plate, the system allows for simplified switching of battery packs and crash protection.
• Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 700L.
• Powered by 800MX 520KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
• High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
• Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.

Specifications:

Length: 1350mm
Height: 360mm
Width: 208mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Rotor Diameter: 281mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.37
Weight (with Motor): 3310g

Includes:

• 1x T-REX 700L DOMINATOR Kit
• 2x 700 Carbon Fiber Blade
• 2x 105mm 3K Carbon Fiber Tail Blade
• 1x 800MX Brushless Motor (520KV)
• 1x 3K Carbon Fiber Tail Boom
• 1x Aluminum Tail Boom

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, according to Transmitter)
• 1x Brushless ESC ~120A-160A
• 1x Flybarless system
• 3x Swashplate Servo
• 1x Tail Servo
• 2x 6S Li-Po 4500 ~ 5200mAh
• 1x 2S Li-Po 1900 ~ 2300mAh
• 1x Digital Pitch Gauge
• 1x Charger

Align T-REX 700N / 700E Feathering Shaft Sleeve Damper #HN7111

Use for T-REX 700 Nitro DFC.

Fuel tank x 1

Fuel tank sinker x 1

Fuel tank hammer x 1

Grommet x 1

Fuel tube x 1(2.5x4.5x90mm)

 6061-T6 Aluminum alloy material and CNC processed.
Use for T-REX 700N DFC.

Specifications:

•   Metal Elevator servo mount x 1
•   Socket buton head screw x 4(M2.5x12mm)
•   Socket buton head screw x 4(M2.5x8m

Use for:

• T-REX 700XN / 700N DFC

Content:

• Engine fan cover(L) x 1 (157.5x104.5x43.1mm)
• Engine fan cover(R) x 1 (157.5x104.5x43.1mm)
• Hex mounting bolt x 2 (F2.5x60.9mm)

Align 105T M1 Helical Auto rotation Tail Drive Gear Set

Use for:

T-REX 700X/760X/800E

Brand new high drive gear ratio is designed especially for F3C & slow 3D flight with superior tail lock and precise flight performance. (Suitable for head speed at 1900RPM)

To make sure to get the best effect, it must be used with whole set.

Gear Ratio 1:5.25

Specification:

105T M1 Auto-rotation tail drive gear set x 1

20T M1 Front drive gear assembly set x 1

Use for:

• T-REX 700X

Content:

• 1x 700X Anti Rotation Bracket
• 4x Socket Screw (M2.5x6mm)