This is the 2 way fuel filter from Align. Suitable for use on the T-Rex 600N and 700N helicopters and other glo-fuel powered models. Includes a handy clip to close the fuel line preventing fuel from flooding an engine when it is not running.

Includes:

• Fuel filter (2-way) 1pcs
  
• Filter mesh 1pcs
  
• Fuel tube clip B  1pcs

Fuel tube x 1 (D2.5xD4x1000mm)

Use for T-REX 600E PRO

Specification:

Ball link x 14
600PRO Ball link x 4
Elevator ball link x 1

Align T-Rex 600N Hook And Loop Tape # HN6023, (set of 5pcs)

Hook and loop tape x 2(15x250mm)

Hook and loop tape x 3(10x200mm)

Align T-rex 600PRO Chassis Carbon Main Frame(L)/2.0mm Pro- 1 pcs

Specification:

Carbon main frame(L) x 1(2.0mm)

Bearing mount x 1(9x15x4.5mm)

Bearing MR95ZZ x 1(5x9x3mm)

Use for T-REX 550/600/XN

Brand new design for 600 Feathering Shaft, both ends of shaft increased thickness from 6mm to 8mm, so its whole external diameter is equal in 8mm thick, which can effectively enhance strength of main rotor system. In addition, adopted M2.5x6mm screws also redouble its intensity to meet its upgrade strength.

Use for:

• T-REX 600XN

Carbon fiber material

Content:

• 1x 600XN Bottom Plate

Use for:

• T-REX 600XN

Stainless steel material / Rubber material

Content:

• 2x 600XN Canopy Support
• 2x 600N Canopy Support Washer

Use for:

• T-REX 600XN

Carbon fiber material

Content:

• 1x 600XN Carbon Fiber Main Frame (Lower side)

●600XN Carbon Fiber Main Frame(Upper side) x 1

●M2.5 Cone Nut x 8

●700X Frame Washer x 1

Use for:

• T-REX 600L / 600E / 600N / 600XN

Carbon fiber material / Glass fiber reinforced nylon material

Content:

• 1x 600XN Carbon Fiber Vertical Stabilizer
• 1x Vertical Stabilizer Mount

CCPM Metal Swashplate x 1

Bearing(6706ZZ) x 2(Φ30xΦ37x4mm)

Linkage ball B(M3x4) x 6(Φ5x12mm)

5 Long linkage ball(M3x4) × 1(Φ5x28mm)

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 1x 600XN (44.4x47x20mm)
• 1x Bearing 695ZZ (5x13x4mm)

Use for T-REX 600XN.
Chromoly steel alloy material.

One of the most classic ALIGN models, the T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness.

Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision.

This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.

The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!

Features:
After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.

Landing skid is tilted 5 degree forward which improves crashworthiness.
Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.

The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.

Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.

Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.

The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.

CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.

Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.

High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.

Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.

Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.

Specifications:

• Length: 1152mm
• Height: 356mm
• Main Blade Length: 600mm
• Main Rotor Diameter: 1354mm
• Tail Rotor Diameter: 260mm
• Engine Pinion Gear: 20T
• Main Drive Gear: 170T
• Autorotation Tail Drive Gear: 180T
• Drive Gear Ratio (E:M:T): 8.5:1:4.5
• Fuel Tank Capacity: 440ccm
• Flying Weight Approx: 3400g

Content:

• 1x T-REX 600XN Kit
• 2x 600 Carbon Fiber Blade
• 2x 95 Carbon Tail Blades
• 3x DS820M Standard servo
• 1x DS825M Tail servo
• 3x DS530 Throttle servo
• 1x Govemor Sensor
• 1x B6M 2-In-1 Voltage Regulator

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 50~60 Muffler
• 1x 50~60 Engine
• 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)

Use for T-REX 600XN.
Glass fiber reinforced nylon material.

Use for:

• T-REX 600N / 600XN

Glass fiber reinforced nylon material / Aluminium alloy material

Content:

• 1x Engine fan cover (L) (134.58x97x36.34mm)
• 1x Engine fan cover (R) 134.58x97x43.08mm)
• 2x Hex mounting bolt (3x5x49mm).

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 1x 600XN Engine Mount
• 6x Socket Screw (M3x8mm)

Use for T-REX 600XN.
High carbon steel material.
Gear Ratio 1:8.5.

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 4x 600XN Frame Mounting Block
• 8x Socket Screw (M3x6mm)

Use for T-REX 600XN.
High carbon steel material.

Use for:

• T-REX 600XN

Stainless steel material / POM material

Content:

•  2x 760X Linkage Rod A (M3x35mm)
•  3x 700X Linkage Rod A (M3x41mm)
•  10x 700N Elevator Ball Link (5x6x19mm)
•  10x 700DFC Linkage Rod Holder (6x4.85x3mm)
•  1x 600XN Throttle Linkage Rod (M2x60.5mm)
•  2x Ball Link (5x20.5mm)

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 18x 600XN Main Frame Mounting Bolt (3x9.8x7.4mm)

Main rotor holder arm x 2

D5 Linkage ball B(M3x4) x 2

Socket collar screw x 4(M3x6mm)

600XN Main shaft x 2(Φ6xΦ10x188.3mm)

Socket collar screw x 2(M3x19mm)

M3 nut x 2

Main shaft spacer(0.3) × 1(Φ10.1xΦ14x0.3mm)

Main shaft spacer(0.5) × 1(Φ10.1xΦ14x0.5mm)

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 2x 600XN Main Shaft Bearing Block
• 2x 6800ZZ Bearing (10x19x5mm)
• 8x Socket Screw (M3x8mm)
• 8x Socket Screw (M2.5x8mm)

This is an optional replacement Align 600XN Metal Drive Gear Assembly, intended for use with the T-Rex 600XN nitro helicopter kits. 600XN Metal Drive Gear Assembly utilizes all-aluminum CNC machining technology for a stronger structure and coefficient of friction.
Includes:

• (1) 600XN Metal Gear Assembly(L)
• (1) 600XN Metal Gear Assembly(R)
• (4) 700X Aluminum Hexagonal Bolt (M3x36mm)
• (2) Socket Screw (M3x10mm)
• (4) Socket Screw (M3x8mm)

This is a replacement Align Painted Canopy, and is intended for use with the Align T-Rex 600N helicopter.

Use for:

• T-REX 600XN

Glass fiber reinforced nylon material / Aluminium alloy material

Content:

• 1x 600XN Receiver Mount
• 3x 700X Aluminum Hexagonal Bolt (M3x36mm)
• 4x Socket Screw (M3x16mm)
• 2x Socket Button Head Self Tapping Screw (T3x6mm)

Use for T-REX 600XN.
Carbon fiber material / Aluminium alloy material.

One of the most classic ALIGN models, T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness. Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision.

This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!

Features:
After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.

Landing skid is tilted 5 degree forward which improves crashworthiness.
Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.

The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.

Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.

Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.

The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.

CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.

Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.

High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.
Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.
Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.

Specifications:

• Length: 1152mm
• Height: 356mm
• Main Blade Length: 600mm
• Main Rotor Diameter: 1354mm
• Tail Rotor Diameter: 260mm
• Engine Pinion Gear: 20T
• Main Drive Gear: 170T
• Autorotation Tail Drive Gear: 180T
• Drive Gear Ratio (E:M:T): 8.5:1:4.5
• Fuel Tank Capacity: 440ccm
• Flying Weight Approx: 3400g

Content:

• 1x T-REX 600XN Kit
• 1x O.S. 55HZ Hyper
• 1x Align or OS High Performance Muffler
• 2x 600 Carbon Fiber Blade
• 2x 95 Carbon Tail Blades
• 3x DS820M Standard servo
• 1x DS825M Tail servo
• 3x DS530 Throttle servo
• 1x Govemor Sensor
• 1x B6M 2-In-1 Voltage Regulator

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)

Use for:

• T-REX 600XN

Glass fiber reinforced nylon material / Aluminium alloy material

Content:

• 1x 600XN Tail Boom Mount (L)
• 1x 600XN Tail Boom Mount (R)
• 5x 700X Aluminum Hexagonal Bolt (M3x36mm)

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 1x 600XN Main Shaft Third Bearing Block
• 1x 689ZZ Bearing (9x17x5mm)
• 4x Socket Screw (M3x8mm)

Specification:

Aluminum tail boom x 2(20x21.5x785mm)

This is an optional upgraded 13.5mm thick 112T Slant Thread Main Gear from Align. The thicker gear allows for improved strength under demanding power conditions. This gear must be paired with AGH70062A or H70G010XX for best results.

Depending on the helicopter that the gear is installed on, modification to the carbon fiber frame may be needed to ensure proper fitment