Align T-Rex 450

Use for Dominator 450L.

Must with 450 Metal Tail Rotor Holder(H45T002XX).

The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab reinforcement and rotation smoothly, but also avoid the scratches from the rotor holder rubbing against painting surface of blade causing expected vibration in flight.
 

• 450 Main Blade Clips x 8
• 450 Tail Blade Clips x 8

• Socket collar screw × 4(M2x12mm)
• Washer × 4(Φ2xΦ3.6x0.2mm)
  

Align 460MX Brushless Motor(1800KV)

1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
3.Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
4.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
5.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
6.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
7.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
8.Suitable for T-REX 450E series,Must with RCE-BL45X Brushless ESC(Governer Mode)(HES45X01).

Specification:
 

• Input voltage:6S
• Max continuous current:30A/45A(5sec)
• Max output power:Approx. 650w/970W(5sec)
• KV value:1800KV
• Dimension:spindle 3.5x29.2x38mm
• Weight:Approx. 87g

Accessories:

• Socket button head screw(M2.5X6mm) x 2
• Washer(2.6X5.8X0.6mm) x 2
• ALIGN standard 3mm gilt terminal x 3set

Align Bearings T-rex (MR63ZZ) set of 4pcs

Align 460MX Brushless Motor 3200KV

1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 3s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor
2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
3.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
4.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
5.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
6.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
7.Suitable for T-REX 450E series.

Specification:

• Input voltage:3S
• Max continuous current:46A/68A(5sec)
• Max output power:Approx. 500w/730W(5sec)
• KV value:3200KV
• Dimension:spindle 3.5x29.2x38mm
• Weight:Approx. 87g

Accessories:

• Socket button head screw(M2.5X6mm) x 2
• Washer(Φ2.6XΦ5.8X0.6mm) x 2
• ALIGN standard 3mm gilt terminal x 3set

Use for Dominator 450/470/Pro.

• Landing skid x 1
• Washer x 2 (2.6x5.8x0.6mm)
• Socket button head screw x 2(M2.5x10mm)

Main Shaft TREX 450 PRO

Main shaft x 2(5x6x118mm)

Main shaft lock ring x 2(5x9x0.1mm)

Hook & Loop Fastening Tape x 5(8x140mm)

Use for T-REX 450 3G Programmable Flybarless System

Arm F x 2(1.3x39mm)
Ball Link x 4

Use for T-REX 450L / Pro Series.

Specification:
 

• Main gear case x 1
• One-way bearing HF0612 x 1 (Φ6xΦ10x12mm)
• Cross screw x 4 (M2x4mm)

Align Metal Head Stopper t-rex 450 PRO#H45018

INCLUDED: Metal head stopper x 1
Socket screw x 1(M2x5mm)

Aluminum alloy material and CNC processed

Use for T-REX 450 PRO.

Specification:

450 PRO Metal rudder servo mount x 1(40.7x26x22.7mm)

Socket button head screw x 4(M2.5x6mm)

Socket button head screw x 4(M2.5x8mm)

This is a pack of two optional Align 1.6mm One-Way Shaft Collars. These one-way bearing shaft collars improve main gear rotation efficiency and precision, reducing main gear vibrations and noise. For use with the T-REX 450 series helicopters.

Included:

• One-way bearing shaft collar x 2(6x8x1.6mm) x 2

Align RCE-BL100A Brushless ESC

Instructions:

• 32-bit fast-speed processor.
• High quality MOSFET.
• Adjustable BEC function, supply power to receiver and servos.
• Superior governor feature.
• Support 730MX Brushless Motor, Extreme 3D Flight.
• Support USB interface to PC for firmware updating.

Specification:

• Supporting input voltage: 3~6S Lipo / 11.1V~22.2V
• Continuous current: 100A
• Surge current: 170A
• BEC output voltage: 5~8V
• BEC output current: Continuous 10A / Surge 25A
• Size: 78.5x38.1x21mm
• Weight: 138g

Accessories:

• 100A Brushless ESC x 1
• Brushless ESC Fan x 1

ALIGN RC Helicopter is one of the leading 3D RC Helicopter companies in the world. Align stands atop in 3D design and performance. The high quality electronics and design leaves nothing left to wish for. Best known for their T-REX 3D helicopters, the T-REX is one of the top brands in the international 3D helicopter scene, with a 3D heli for every class.

Align T-rex 450 Dominator Multiple Main Shaft Bearing Block

Align T-Rex 450 Dominator Tail Rotor Hub

Use for T-REX 450 L and Dominator

6061-T6 Aluminum alloy material and CNC processed.

Must with 450 Metal Tail Rotor Holder(H45T002XXW).

Specification:

• 6061-T6 Aluminum alloy material and CNC processed.
• Use for T-REX 450.
• Must with 450 Metal Tail Rotor Holder(H45T002XXW).
• 450Tail rotor hub x 2
• Washer(Φ2xΦ4.8x0.6mm) x 2
• Washer(Φ3xΦ4.8x0.3mm) x 2
• M3 set screw x 2(M3x3mm)
• Socket collar screw x 2(M2x6mm)
• Weight:6.01g

Spare part suitable for T-REX 450 / L

6061-T6 Aluminum alloy material and CNC processed.

Specification:

2x 450 Metal tail rotor holder
1x 450 Tail rotor hub
2x Bearing MR63ZZ (3x6x2.5mm)
2x Bearing MR74ZZ (3.5x7x2.5mm)
2x Thrust bearing (3x6x2.8mm)
2x Washer (2x4.8x0.6mm)
2x Washer (2x4.8x0.3mm)
2x Socket collar screw (M2x9mm)
1x M3 set screw (M3x3mm)
2x Socket button head collar screw (M3x6mm

Use for T-REX 450 Series.

Must use with: H45157 Motor Pinion Helical Gear 12T.

New style high strength 121 tooth Mod 0.6 helical main hear for 450 size helis. The increase gear pitch can withstand higher power, at the same time minimize operational noise. A great upgrade to withstand the modern high power system.
Utilizes high strength polymer plastic with excellent rigidity and flexibility characteristics.
Patented unique built in fan design to create induced air flow, effectively cooling electronics and motor.
Gear ratio 1:10.08.

delivered in set of : CNC M0.6 Slant Thread Main drive gear (121T) x 3

Stainless Steel Linkage Rod × 5 pcs

Use for T-REX 450 Sport.

Linkage rod(D) x 1(D1.3x32mm)

Linkage rod(M) x 1(D1.3x19mm)

Linkage rod(O) x 3(D1.3x28mm)

Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.

Use for T-REX 450DFC。

450DFC Head Damper X 4(4x6.5x3.8mm)

Suitable for T-REX 450SE/SPORT to install 450DFC Main Rotor Head Upgrade Set (H45162/H45162QN)

Specification:

• 450DFC main shaft(SE) × 2(5x112mm)
• Socket collar screw × 2(M2x12mm)
• M2 Nut × 2(M2)
• Main shaft spacer × 1(5xΦ9x6mm)
• M3 Set screw × 2(M3x3mm)
• Weight:33g

This is an Align 104T M0.6 Autorotation Tail Drive Gear Set, intended for use with the T-Rex 450 & 470L Helicopters.

Specification:

• Use for T-REX 450-470L

Must use with:

• Torque Tube Front Drive Gear Set / 28T M0.6 (H45G001NXT)

Content:

• 2x Auto rotation tail drive gear - Black

 

T-Rex 450L / PRO M0.6 Torque Tube Front Drive Gear Set/26T

Specification:

•     Use for T-REX 450L / PRO
•     Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear.
•     Effectively minimize gear striping and crash damage.

Must use with:

    - 104T M0.6 Autorotation Tail Drive Gear set (H45G005XXT)

Align T-rex Bearings (MR84ZZ) HS1032T set of 4

One Way Bearing Shaft (2pcs)

Specification: Length:21.5mm

Max outer diameter:8mm

Hole outer diameter:6mm

Hole inner diameter:5mm

Use for T-REX 450 Pro.
Special protection design torque tube. When you have a crash or collision with tail blade, it will protect the umbrella gear and make the damage at the back section of the torque tube. While using this torque tube, please always check if the torque tube is damaged or broke every time after a collision while flying.
Suitable for normal and 3D flying.

Included in the package:

Torque tube x 2
Torque tube end x 4
347 tai boom x 1(11x12x347mm)
Max. impact torque:5~7kg.cm

Use for T-REX450 XL / CF / SE / S(tail drive gear 25T)/450 L / Pro / Sport V2.

This new main gear is great for the balance.

New super strength plastic-steel material, multinational patent design, light weight, and special cooling blade design is good for lowering the temperature of electronic equipment and motors. It can efficiently increase the wind flow.

Specification:

• Autorotation tail drive gear (106T) x 1 (Black)
• Weight:8.5g/pcs

Align Trex 450 Flybar Rod 210mm, set of 2 #HS1264

Align Trex HS1229 (HS1026) One-Way Bearing New
Made in Germany

Use for T-REX 450 L / SE / V2 / PRO.

Ball link x 12(11x2.3mm)

Align Trex 450 Tail Shaft Slide Bush #H45T001

Anti rotation bracket spacer x 4(12x4.49x2mm

Carbon bottom plate x 1

Bottom Plate T-REX 450

Canopy Holder / Tailplane-Hose clip