Airplane-Accessories

Protection Wing Tip/Tail Skid

Set of 2pcs

Product Description

• This wing Tip/Tail SkidProtect those wing tips and tails. Easily installed by using CA or epoxy with holes provided for screw mounting.

This item made of metal, threaded on one end, and drilled on the other to be soldered onto a piece of wire, of glued to carbon rod.

Threaded Coupler for 2mm rod, fits 2mm clevises

Set of 2

Avoid nasty wing tip 'scuffing' by fitting these small, tough nylon skid. The lightweight tail skid is ideal for those who don't want the weight of a tail wheel but need to keep the rudder out of the grass

set of 2.

RO-Power Torque Brushless motors are lightweight, powerful external rotor motors with high torque and efficiency. They do not require a gearbox and are suitable for a wide range of applications. All components are manufactured on modern CNC machines from high-quality materials. Precise ball bearings increase the service life and minimize vibrations. We recommend the operation of RO-Power Torque motors with ROBBE Ro-Control speed controllers.

Technical data

Housing-Ø (mm): 22,8
Housing length (mm): 18
LiPo (S): 2-3
Shaft-Ø (mm): 5
Propeller: 3S/ 6x3, 5,5x4, 2S/ 7x4, 7x4
Weight (g): 20
Examples of use: F5K
RPM/V: 2250
Engine-type: External rotor
Weight category (g): 0 to 5

RO-Power Torque Brushless motors are lightweight, powerful external rotor motors with high torque and efficiency. They do not require a gearbox and are suitable for a wide range of applications. All components are manufactured on modern CNC machines from high-quality materials. Precise ball bearings increase the service life and minimize vibrations. We recommend the operation of RO-Power Torque motors with ROBBE Ro-Control speed controllers.

Technical data

Housing-Ø (mm): 22,8
Housing length (mm): 18
LiPo (S): 2
Shaft-Ø (mm): 5
Propeller: 2S/ 6x3, 6x4
Weight (g): 20.8
Examples of use: F5K
RPM/V: 2750
Engine-type: External rotor

Stainless Steel clevises , Treaded for M2 rods.
Pack of 10

Stainless Steel clevises , Treaded for M2.5 rods.
Pack of 10

This is a set of 2 Stainless Steel Axle Shafts for Wheels 4x21mm

Set of 2, possible to have in Blue or Red Color, choose in options

Flextanks are molded from a special flexible, translucent polymer blend making them easier to fit into tight places and are very durable. They can be reshaped with a heat gun if desired. Flextanks are for glow fuel only.

• 14 Ounce / 420 ml
• Height: 52 mm
• Width: 67 mm
• Length: 146 mm

Delivery : 1 fuel tank

 Instructions:    

• New design High scale telescope strut with rubber wheel
• Hardening Steel Wheel Axle
• Suitable for all DSR-46 Series Retract unit
• High impact Aluminum Alloy
• High precision CNC cutting
• Llight, and more strength.

Specification:    

• Shock Absorber diameter: 11mm
• Shaft Hole diameter: Φ5.5mm
• Weight: 31g (approx.)

Accessories:

• Shock AbsorberX1
• Impact Shaft  X1
• Strut t X1
• Wheel Axle  X 1
• Spring  X 1
• M2X4mm Screw  X 1
• M3 X3mm Screw  X 5
• 45mm Rubber wheel  X 1

 Instructions:    

• New design High scale telescope strut with rubber wheel
• Hardening Steel Wheel Axle
• Suitable for all DSR-46 Series Retract unit
• High impact Aluminum Alloy
• High precision CNC cutting
• Light, and more strength.

Specification:    

• Shock Absorber diameter: 11mm
• Shaft Hole diameter: Φ5.5mm
• Weight: 33g (approx.)

Accessories:

• Shock AbsorberX1
• Impact Shaft  X1
• Strut t  X1
• Wheel Axle  X 1
• Spring  X 1
• M2X4mm Screw  X 1
• M3 X3mm Screw  X 5
• 51mm Rubber wheel  X 1

 Instructions:

•   New design High scale Trail Link strut with foamy wheel for DSR-R30 Retract.
•   Hardening Steel Wheel Axle
•   Suitable for all DSR-30 Series Retract unit
•   High impact Aluminum Alloy
•   High precision CNC cutting
•   Light, and more strength.

Specifications:

•   Upper leg diameter: Φ8mm
•   Dimension: 93.5mm Hight without wheel
•   Weight: 14g (approx.)

Nickel coated wheel collars for 4mm axes. A hex set screw provides a secure fixing.

Set of 4 collars

Nickel coated wheel collars for 5mm axes. A hex set screw provides a secure fixing.

Set of 4 collars

Mount your servo on the side or on wing of the heli, airplane and other applications.
CNC made, very light construction.

Material: aluminium 6061-T6 (anodized)
Weight: 20g
Servo: FUTABA, HITEC, JR, SAVOX
Servo not included

Avaliable in Red or Blue( Stock depending)

Aluminium Thumb screw set, Very light, 4 pcs pack.

M3, fits all size canopies

Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

Specifications:

• Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm
• CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 5x3), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
• Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 3x5 eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
• The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
• The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
• A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
• In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
• The CFRP ball joint adapter can be painted easily.
• Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
• At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
• Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
• The result is a high strength component, which does not bear comparison with Duralaluminium.
• However, it is lighter and vibration resistant.
• All CFRP components are manufactured in Germany using the latest CNC machines.

Included in the package:

1 key,

4 ball joint adaptor

CFK fork servo lever 25mm Futaba

Specifications:

• Fork servo lever with precise teeth (variant).
• Gap servo driven ball center to 25mm.
• Fork opening 5 mm.
• Weight 0.8g.
• Comes with built-in ball joint and M2 screw with lock nut.
• The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
• The redesign of our fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The execution of a fork lever effectively prevents misjudged the servo drive output.
• The servo gear will last longer.
• Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
• At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
• Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
• The result is a high strength component which need not fear comparison with Duralaluminium.
• However, it is lighter and vibration resistant.
• All servo lever are manufactured in Germany using the latest CNC machines.

CFK fork servo lever 30mm Futaba

Specifications:

• Fork servo lever with precise teeth (variant).
• Gap servo driven ball center to 30mm.
• Fork opening 5 mm.
• Weight 1.5g.
• Comes with built-in ball joint and M2 screw with lock nut.
• The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
• The redesign of our fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The execution of a fork lever effectively prevents misjudged the servo drive output.
• The servo gear will last longer.
• Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
• At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
• Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
• The result is a high strength component which need not fear comparison with Duralaluminium.
• However, it is lighter and vibration resistant.
• All servo lever are manufactured in Germany using the latest CNC machines.

CFK fork servo lever 38mm Futaba

Specifications:

• Gap servo driven ball center to 38mm.
• Fork opening 6mm.
• Fork hole for M3 thread. Weight 3g.
• Comes with built-in ball joint
• The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
• The redesign of our fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The execution of a fork lever effectively prevents misjudged the servo drive output.
• The servo gear will last longer.
• Our Servohebel we manufacture of highly compressed carbon fiber plastic.
• At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
• Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
• The result is a high strength component which need not fear comparison with Duralaluminium.
• However, it is lighter and vibration resistant.
• All servo lever are manufactured in Germany using the latest CNC machines.

CFK fork servo lever 46mm Futaba

Specifications:

• Gap servo driven ball center to 46mm.
• Fork opening 6mm.
• Fork hole for M3 thread. Weight 3.5g.
• Comes with built-in ball joint
• The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
• The redesign of our fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The execution of a fork lever effectively prevents misjudged the servo drive output.
• The servo gear will last longer.
• Our Servohebel we manufacture of highly compressed carbon fiber plastic.
• At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
• Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
• The result is a high strength component which need not fear comparison with Duralaluminium.
• However, it is lighter and vibration resistant.
• All servo lever are manufactured in Germany using the latest CNC machines.

FORK LEVER 2-ARM 24/30MM Futaba

Specifications:

• Double fork servo lever with precise teeth (variant)
• Gap servo driven ball center to 24mm / 30mm.
• Fork opening 5 mm. 2.2 g weight.
• Supplied with built-in ball joints
• The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp rudder.
• The new design of our double fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The redesign of our fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The execution of a fork lever effectively prevents misjudged the servo drive output.
• The servo gear will last longer.
• Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
• At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
• Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
• The result is a high strength component which need not fear comparison with Duralaluminium.
• However, it is lighter and vibration resistant. All servo lever are manufactured in Germany using the latest CNC machines.

This is a set of Heavy-Duty Ball Links for use with M2 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

• Length 23mm( end to end)
• Rod diameter tread-M2
• Ball mounting screw-M2
• Set of 2 links with hardware

This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

• Length 23mm( end to end)
• Rod diameter tread-M3
• Ball mounting screw-M2
• Set of 2 links with hardware

This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

• Length 30mm( end to end)
• Rod diameter tread-M3
• Ball mounting screw-M3
• Set of 8 links with hardware

FEATURES:
 

• Black nylon link construction
• Brass swivel-ball construction
• Beveled brass swivel-ball stand-off
• Hex-Head machine mounting screw

This is a set of Heavy-Duty Ball Links for use with M4 Threaded Rods. For heavy duty Applications, Made from self Lubricated POM, perfect for UAV, Airplanes, Cars, Boats and Industrial Applications.

Size of ball link:

• Length 22mm (end to end)
• Rod diameter tread-M4
• Ball mounting screw-M3
• Set of 10 Ball links with Balls

This is a set of Heavy-Duty Ball Links for use with M4 Threaded Rods. For heavy duty Applications, Made from self Lubricated POM, perfect for UAV, Airplanes, Cars, Boats and Industrial Applications.

Size of ball link:

• Length 25mm ( end to end)
• Rod diameter tread-M4
• Ball mounting screw-M3
• Set of 10 Ball links with Balls

This is a set of Heavy-Duty Ball Links for use with M4 Threaded Rods. For heavy duty Applications, Made from self Lubricated POM, perfect for UAV, Airplanes, Cars, Boats and Industrial Applications.

Size of ball link:

• Length 28mm ( end to end)
• Rod diameter tread-M4
• Ball mounting screw-M3
• Set of 10 Ball links with Balls

MAXI Ball Links M3, Ball Diameter Outside 6,0mm w/h Hole 3,0mm diameter

Nylon Ball Links for large airplanes, large gas powered boats and off-road gas cars.
It is almost impossible to „pop“ the ball out by hand, yet it swivels smoothly in the nylon socket. Nickel-plated ball outside dia.: 6 mm (.24 in.).. M3 mounting hardware

Metal Pushrod Heavy Duty with Ball link CNC

Ball link is 31mm long

Thread M3

Rod is 65.5mm long

Set of 1 rod+2 Ball links

Spring steel Piano (Music) wire, Straight, Great for making landing gear, cabin struts, and so much more!
Bend to desired shape , Cut to desired length . Great for scratch builders, modelers, crafts, machine shops, and
architectural applications.
Wires are individually packaged in clear plastic tubes and bar coded for ease of sale.

Supplied in Length of 1meter, in sizes from 0.8mm - 2.5mm (Choice)

Machined from High-Quality Aluminum bar stock, it is designed to fit on a 4mm motor shaft, and has a 6mm threaded prop shaft.

Machined from High-Quality Aluminum bar stock, it is designed to fit on a 5mm motor shaft, and has a 8mm threaded prop shaft.

Servo Lever Carbon fiber arm 20mm Type A for Futaba

Specifications:

• The high-quality carbon fiber plastic is optimally matched to this servo arm.
• With a weight of 1g he is only half the weight of aluminum, with the same strength.
• The internal gear is manufactured with precision for displayed under "Versions" servo types.
• Due to the smaller mass, compared to aluminum and a plastic own damping the transmission of the servos work longer play.
• The bores of the servo lever be 1.5 mm, so it is possible to screw a screw M2 readily.